[Tue Feb 21 10:40:10 2012] Detection parameters:
  Position = (316.5, 268.1) = 15 32 50.26 30 17 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1480.2 +/- 48.1
  Background counts = 93.7
  Rate = 0.06 +/- 0.002

[Tue Feb 21 10:40:11 2012] Off-axis axis estimate = 2.56'
[Tue Feb 21 10:44:32 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 10:44:32 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Feb 21 10:44:32 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Tue Feb 21 10:44:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.71"
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 21 11:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src1.csv
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 21 11:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src1.csv
[Tue Feb 21 11:29:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 21 11:29:30 2012] Fit fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 21 14:18:28 2012] Spatial fit model total counts = 1556.000000, observed total counts = 1556.000000
[Tue Feb 21 14:18:28 2012] Offset between fit and detection position for source 1 = 0.076851 pixels
[Tue Feb 21 14:18:28 2012] 1570.189000 total counts/ 720.771000 bgd. counts: snr = 31.639004
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.076851 pixels
  Position = (316.5, 268.1) = 15 32 50.26 30 17 13.8
  Extent = 5.0 (4.7-5.3)", rotation angle = 0
  Source counts = 849.4 +/- 39.6
  Background counts = 720.8
  Rate = 0.04 +/- 0.002
[Tue Feb 21 14:18:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 14:18:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 14:18:28 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 14:18:28 2012] Source does appear to be extended
[Tue Feb 21 14:18:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 14:18:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 14:18:52 2012] Initial guess for spatial extent in simple fitting = 4.97"
[Tue Feb 21 14:18:52 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.113
[Tue Feb 21 14:18:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.97"
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 21 14:50:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 21 14:50:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 14:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 21 14:50:32 2012] Fit fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 21 20:19:28 2012] Spatial fit model total counts = 1556.000000, observed total counts = 1556.000000
[Tue Feb 21 20:19:28 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Tue Feb 21 20:19:28 2012] 1570.189000 total counts/ 720.771000 bgd. counts: snr = 31.639004
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (316.5, 268.1) = 15 32 50.26 30 17 13.8
  Extent = 5.0 (4.7-5.3)", rotation angle = 0
  Source counts = 849.4 +/- 39.6
  Background counts = 720.8
  Rate = 0.04 +/- 0.002
[Tue Feb 21 20:19:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 20:19:28 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 20:19:28 2012] Source does appear to be extended
[Tue Feb 21 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 20:19:51 2012] XMMSAS src. selection expression = ellipse(27484.830000, 23278.795000, 298.006809, 298.006809, 0.000000, X, Y)
[Tue Feb 21 20:19:51 2012] Writing source region out to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 21 20:19:51 2012] Extracting stamp from image fullrun_pn_xmm0651240101_pi300-10000_cl_sm2.00.img.gz, (299, 251) - (334, 285)
[Tue Feb 21 20:19:51 2012] XMMSAS bgd. selection expression = annulus(27484.830000, 23278.795000, 496.678014, 993.356029, X, Y)
[Tue Feb 21 20:19:51 2012] Writing fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1.gif
[Tue Feb 21 20:20:04 2012] Mean detx,y = (-450.30, 4478.13) 
[Tue Feb 21 20:20:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 20:20:31 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 20:20:31 2012] Setting source spectrum file to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 21 20:20:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Feb 22 02:13:47 2012] Updating aperture counts using extracted products
[Wed Feb 22 02:13:47 2012] Error reading totcts from fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 22 02:13:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 02:13:47 2012] Using photon index=1.80, rate=0.0354, arf fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1.arf
[Wed Feb 22 02:13:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 02:13:47 2012] Updating source flux to 1.3e-13
[Wed Feb 22 02:17:22 2012] Reading fit data from xmm0651240101/analysis//spectral/fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Feb 22 02:17:22 2012] Spectral fit parameter nH value = 154697000000.0
[Wed Feb 22 02:17:22 2012] Spectral fit parameter PhoIndex value = 2.12602
[Wed Feb 22 02:17:22 2012] Failed to get F(0.3-8.0) from xmm0651240101/analysis//spectral/fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Feb 22 02:17:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 02:17:22 2012] Using Nh = 1.5e+11, photon index=2.13, rate=0.0354, arf fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src1.arf
[Wed Feb 22 02:17:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 02:17:22 2012] Updating source flux to 1e-13