[Sat Aug  4 01:52:16 2012] Detection parameters:
  Position = (153.0, 381.7) = 13 47 57.70 17 35 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.6 +/- 6.6
  Background counts = 4.0
  Rate = 0.002 +/- 0.0005

[Sat Aug  4 01:52:16 2012] Off-axis axis estimate = 12.15'
[Sat Aug  4 02:07:44 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 02:07:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 02:07:44 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Sat Aug  4 02:07:44 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Sat Aug  4 02:07:44 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.50"
[Sat Aug  4 02:15:59 2012] fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_src7.ximg exists
[Sat Aug  4 02:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_src7.csv
[Sat Aug  4 02:15:59 2012] fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Aug  4 02:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_src7.csv
[Sat Aug  4 02:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 02:15:59 2012] fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Aug  4 02:15:59 2012] fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Aug  4 02:15:59 2012] Fit fullrun_mos2_xmm0651140501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Aug  4 02:16:03 2012] Spatial fit model total counts = 59.584400, observed total counts = 59.000000
[Sat Aug  4 02:16:03 2012] Offset between fit and detection position for source 5 = 0.375579 pixels
[Sat Aug  4 02:16:03 2012] 59.574180 total counts/ 50.154700 bgd. counts: snr = 1.330060
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.375579 pixels
  Position = (153.3, 381.9) = 13 47 57.62 17 35 8.1
  Extent = 3.1" x 3.1", rotation angle = 0
  Source counts = 9.4 +/- 7.7
  Background counts = 50.2
  Rate = 0.0007 +/- 0.0006
  Deleting source due to low Poisson probability