[Wed Dec 28 00:57:28 2011] Detection parameters:
  Position = (283.4, 275.7) = 4 35 26.85 24 14 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 846.7 +/- 44.1
  Background counts = 168.3
  Rate = 0.009 +/- 0.0005

[Wed Dec 28 00:57:32 2011] Off-axis axis estimate = 1.98'
[Wed Dec 28 01:15:56 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 01:15:56 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Wed Dec 28 01:15:56 2011] source mask rpix=1.7, npix_max = 19, mask sum = 23, frac = 1.182
[Wed Dec 28 01:15:56 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 7.42"
[Wed Dec 28 05:21:26 2011] fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_src4.ximg exists
[Wed Dec 28 05:21:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_src4.csv
[Wed Dec 28 05:21:26 2011] fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Dec 28 05:21:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_src4.csv
[Wed Dec 28 05:21:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:21:27 2011] fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Dec 28 05:21:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Dec 28 05:21:27 2011] fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Dec 28 05:21:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Dec 28 05:21:27 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 08:30:13 2011] Source 5 is offset by 1.459488 and -7.011888 pixels which is larger than
2 X fitted extent = 3.032300 x 6.675219, not incorporating fit results
[Wed Dec 28 08:30:13 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 08:30:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 08:30:13 2011] Assessing source extent using major
[Wed Dec 28 08:30:13 2011] Source does appear to be extended
[Wed Dec 28 08:30:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 08:30:13 2011] Source is confused with source 3
[Wed Dec 28 08:30:54 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 08:30:54 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Wed Dec 28 08:30:54 2011] source mask rpix=1.7, npix_max = 19, mask sum = 23, frac = 1.182
[Wed Dec 28 08:30:54 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.42"
[Wed Dec 28 13:00:22 2011] fullrun_pn_xmm0651120101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Dec 28 13:00:23 2011] fullrun_pn_xmm0651120101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Dec 28 13:00:23 2011] Fit fullrun_pn_xmm0651120101_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Dec 28 13:00:23 2011] fullrun_pn_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Dec 28 13:00:23 2011] fullrun_pn_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Dec 28 13:00:23 2011] Fit fullrun_pn_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Dec 28 16:34:06 2011] Source 5 is offset by 1.253921 and -7.080969 pixels which is larger than
2 X fitted extent = 2.468984 x 2.781269, not incorporating fit results
[Wed Dec 28 16:34:07 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 16:34:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 16:34:07 2011] Assessing source extent using major
[Wed Dec 28 16:34:07 2011] Source does appear to be extended
[Wed Dec 28 16:34:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 16:34:49 2011] XMMSAS src. selection expression = ellipse(24608.555298, 23934.209717, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 16:34:49 2011] Writing source region out to fullrun_pn_xmm0651120101_pi300-10000_pass1_cl_src5_src.reg
[Wed Dec 28 16:34:49 2011] Extracting stamp from image fullrun_pn_xmm0651120101_pi300-10000_cl_sm2.00.img.gz, (246, 238) - (321, 313)
[Wed Dec 28 16:34:49 2011] XMMSAS bgd. selection expression = annulus(24608.555298, 23934.209717, 1087.500000, 2175.000000, X, Y) && !ellipse(24498.521900, 24527.565200, 1416.511241, 1349.440839, 2.661540, X, Y) && !ellipse(26225.972595, 25847.468964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22274.673800, 21639.192400, 343.012810, 343.012810, 0.000000, X, Y)
[Wed Dec 28 16:34:49 2011] Writing fullrun_pn_xmm0651120101_pi300-10000_pass1_cl_src5.gif
[Wed Dec 28 17:13:58 2011] Mean detx,y = (115.65, -228.41) 
[Wed Dec 28 17:14:19 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 17:15:44 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 17:15:45 2011] Setting source spectrum file to fullrun_pn_xmm0651120101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Dec 28 17:15:45 2011] Setting bgd. spectrum file to fullrun_pn_xmm0651120101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Dec 28 19:50:04 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 19:50:04 2011] rmf not generated due to insufficient counts
[Thu Dec 29 00:37:06 2011] Updating aperture counts using extracted products
[Thu Dec 29 00:37:06 2011] Error reading totcts from fullrun_pn_xmm0651120101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Dec 29 00:37:10 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 00:37:10 2011] Using photon index=1.80, rate=0.00917, arf fullrun_pn_xmm0651120101_pi300-10000_pass1_cl_src5.arf
[Thu Dec 29 00:37:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 00:37:10 2011] Updating source flux to 2.4e-14
[Thu Dec 29 00:43:40 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting