[Wed Dec 28 00:58:39 2011] Detection parameters:
  Position = (283.3, 275.0) = 4 35 26.87 24 14 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 350.7 +/- 29.6
  Background counts = 95.4
  Rate = 0.003 +/- 0.0003

[Wed Dec 28 00:58:39 2011] Off-axis axis estimate = 2.02'
[Wed Dec 28 05:21:28 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 05:21:28 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Wed Dec 28 05:21:28 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.024
[Wed Dec 28 05:21:28 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.44"
[Wed Dec 28 07:00:41 2011] fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Dec 28 07:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_src5.csv
[Wed Dec 28 07:00:41 2011] fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Dec 28 07:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_src5.csv
[Wed Dec 28 07:00:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 07:00:41 2011] fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Dec 28 07:00:41 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Dec 28 07:00:41 2011] fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Dec 28 07:00:41 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Dec 28 07:00:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651120101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 08:30:22 2011] Source 12 is offset by 7.151763 and 5.849034 pixels which is larger than
2 X fitted extent = 0.855035 x 0.855035, not incorporating fit results
[Wed Dec 28 08:30:22 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 08:30:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 08:30:22 2011] Assessing source extent using major
[Wed Dec 28 08:30:22 2011] Source does appear to be extended
[Wed Dec 28 08:30:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 13:00:24 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 13:00:24 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Wed Dec 28 13:00:24 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.024
[Wed Dec 28 13:00:24 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 7.44"
[Wed Dec 28 15:04:04 2011] fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Dec 28 15:04:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_src5.csv
[Wed Dec 28 15:04:04 2011] fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Dec 28 15:04:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_src5.csv
[Wed Dec 28 15:04:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 15:04:04 2011] fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Dec 28 15:04:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Dec 28 15:04:04 2011] fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Dec 28 15:04:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Dec 28 15:04:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651120101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 16:34:16 2011] Source 12 is offset by 1.206329 and -7.523701 pixels which is larger than
2 X fitted extent = 1.998202 x 1.998202, not incorporating fit results
[Wed Dec 28 16:34:16 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 16:34:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 16:34:16 2011] Assessing source extent using major
[Wed Dec 28 16:34:16 2011] Source does appear to be extended
[Wed Dec 28 16:34:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 21:32:52 2011] XMMSAS src. selection expression = ellipse(24602.443420, 23877.261993, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 21:32:52 2011] Writing source region out to fullrun_mos1_xmm0651120101_pi300-10000_pass1_cl_src12_src.reg
[Wed Dec 28 21:32:52 2011] Extracting stamp from image fullrun_mos1_xmm0651120101_pi300-10000_cl_sm2.00.img.gz, (246, 238) - (321, 313)
[Wed Dec 28 21:32:52 2011] XMMSAS bgd. selection expression = annulus(24602.443420, 23877.261993, 1087.500000, 2175.000000, X, Y) && !ellipse(24498.118888, 24534.861961, 416.641947, 400.798594, 342.401308, X, Y) && !ellipse(22223.033308, 21639.505000, 462.408013, 462.408013, 0.000000, X, Y)
[Wed Dec 28 21:32:52 2011] Writing fullrun_mos1_xmm0651120101_pi300-10000_pass1_cl_src12.gif
[Wed Dec 28 21:36:53 2011] Mean detx,y = (405.23, -217.76) 
[Wed Dec 28 21:36:56 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 21:37:16 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 21:37:17 2011] Setting source spectrum file to fullrun_mos1_xmm0651120101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Dec 28 21:37:17 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0651120101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Dec 28 22:21:29 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 22:21:29 2011] rmf not generated due to insufficient counts
[Thu Dec 29 00:37:13 2011] Updating aperture counts using extracted products
[Thu Dec 29 00:37:13 2011] Error reading totcts from fullrun_mos1_xmm0651120101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Dec 29 00:37:15 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 00:37:15 2011] Using photon index=1.80, rate=0.00304, arf fullrun_mos1_xmm0651120101_pi300-10000_pass1_cl_src12.arf
[Thu Dec 29 00:37:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 00:37:15 2011] Updating source flux to 3e-14
[Thu Dec 29 00:37:22 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting