[Wed Jun 27 07:00:24 2012] Detection parameters:
  Position = (279.8, 380.7) = 14 40 50.59 53 34 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.7 +/- 19.6
  Background counts = 23.3
  Rate = 0.03 +/- 0.003

[Wed Jun 27 07:00:24 2012] Off-axis axis estimate = 6.12'
[Wed Jun 27 07:01:57 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:01:57 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Wed Jun 27 07:01:57 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.870
[Wed Jun 27 07:01:57 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.49"
[Wed Jun 27 07:30:00 2012] fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jun 27 07:30:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_src10.csv
[Wed Jun 27 07:30:00 2012] fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jun 27 07:30:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_src10.csv
[Wed Jun 27 07:30:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 07:30:01 2012] fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jun 27 07:30:01 2012] fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jun 27 07:30:01 2012] Fit fullrun_pn_xmm0651100401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Jun 27 08:03:05 2012] Spatial fit model total counts = 309.000000, observed total counts = 309.000000
[Wed Jun 27 08:03:05 2012] Offset between fit and detection position for source 10 = 0.351753 pixels
[Wed Jun 27 08:03:05 2012] 304.048000 total counts/ 168.725000 bgd. counts: snr = 10.417941
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.351753 pixels
  Position = (279.5, 380.5) = 14 40 50.71 53 34 35.0
  Extent = 6.1 (5.2-7.2)", rotation angle = 0
  Source counts = 135.3 +/- 17.4
  Background counts = 168.7
  Rate = 0.02 +/- 0.002
[Wed Jun 27 08:03:05 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 08:03:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 08:03:05 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 08:03:05 2012] Source does appear to be extended
[Wed Jun 27 08:03:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 08:03:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 08:03:16 2012] Initial guess for spatial extent in simple fitting = 6.07"
[Wed Jun 27 08:03:16 2012] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.626
[Wed Jun 27 08:03:16 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 6.07"
[Wed Jun 27 08:32:17 2012] fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jun 27 08:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_src10.csv
[Wed Jun 27 08:32:17 2012] fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jun 27 08:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_src10.csv
[Wed Jun 27 08:32:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 08:32:17 2012] fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jun 27 08:32:17 2012] fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jun 27 08:32:17 2012] Fit fullrun_pn_xmm0651100401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Jun 27 09:03:35 2012] Spatial fit model total counts = 312.000000, observed total counts = 312.000000
[Wed Jun 27 09:03:35 2012] Offset between fit and detection position for source 10 = 0.005579 pixels
[Wed Jun 27 09:03:35 2012] 307.198000 total counts/ 170.164000 bgd. counts: snr = 10.504962
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.005579 pixels
  Position = (279.5, 380.5) = 14 40 50.71 53 34 35.0
  Extent = 6.1 (5.2-7.2)", rotation angle = 0
  Source counts = 137.0 +/- 17.5
  Background counts = 170.2
  Rate = 0.02 +/- 0.002
[Wed Jun 27 09:03:35 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:03:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:03:35 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:03:35 2012] Source does appear to be extended
[Wed Jun 27 09:03:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:03:47 2012] XMMSAS src. selection expression = ellipse(24269.651800, 33052.188400, 366.209411, 366.209411, 0.000000, X, Y)
[Wed Jun 27 09:03:47 2012] Writing source region out to fullrun_pn_xmm0651100401_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 27 09:03:47 2012] Extracting stamp from image fullrun_pn_xmm0651100401_pi300-10000_cl_sm2.00.img.gz, (258, 359) - (301, 402)
[Wed Jun 27 09:03:47 2012] XMMSAS bgd. selection expression = annulus(24269.651800, 33052.188400, 610.349018, 1220.698035, X, Y)
[Wed Jun 27 09:03:47 2012] Writing fullrun_pn_xmm0651100401_pi300-10000_pass1_cl_src10.gif
[Wed Jun 27 09:09:17 2012] Mean detx,y = (-437.41, -5808.44) 
[Wed Jun 27 09:09:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 09:09:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 09:09:32 2012] Setting source spectrum file to fullrun_pn_xmm0651100401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 27 09:09:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651100401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 27 09:52:14 2012] Updating aperture counts using extracted products
[Wed Jun 27 09:52:14 2012] Error reading totcts from fullrun_pn_xmm0651100401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 27 09:52:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 09:52:15 2012] Using photon index=1.80, rate=0.0164, arf fullrun_pn_xmm0651100401_pi300-10000_pass1_cl_src10.arf
[Wed Jun 27 09:52:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 09:52:15 2012] Updating source flux to 6.7e-14