[Sun Jun 24 08:12:59 2012] Detection parameters:
  Position = (331.4, 302.1) = 22 7 50.82 54 31 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1299.6 +/- 70.5
  Background counts = 470.1
  Rate = 0.02 +/- 0.001

[Sun Jun 24 08:12:59 2012] Off-axis axis estimate = 2.40'
[Sun Jun 24 08:23:01 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 08:23:01 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Jun 24 08:23:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.590
[Sun Jun 24 08:23:01 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.63"
[Sun Jun 24 20:31:03 2012] fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_src14.ximg exists
[Sun Jun 24 20:31:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_src14.csv
[Sun Jun 24 20:31:03 2012] fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Jun 24 20:31:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_src14.csv
[Sun Jun 24 20:31:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 20:31:04 2012] fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Jun 24 20:31:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Jun 24 20:31:04 2012] fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Jun 24 20:31:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Jun 24 20:31:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 23:11:02 2012] Spatial fit model total counts = 45298.500000, observed total counts = 33090.000000
[Sun Jun 24 23:11:02 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 23:11:02 2012] Source 15 is offset by 7.408947 and 6.122906 pixels which is larger than
2 X fitted extent = 4.714253 x 2.537195, not incorporating fit results
[Sun Jun 24 23:11:02 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 23:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 23:11:02 2012] Assessing source extent using major
[Sun Jun 24 23:11:02 2012] Source does appear to be extended
[Sun Jun 24 23:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 23:11:02 2012] Source is confused with source 16
[Sun Jun 24 23:11:17 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 23:11:17 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Jun 24 23:11:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.590
[Sun Jun 24 23:11:17 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.63"
[Mon Jun 25 08:32:25 2012] fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Jun 25 08:32:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_src14.csv
[Mon Jun 25 08:32:25 2012] fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Jun 25 08:32:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_src14.csv
[Mon Jun 25 08:32:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 08:32:26 2012] fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Jun 25 08:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Jun 25 08:32:26 2012] fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jun 25 08:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Jun 25 08:32:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 09:56:46 2012] Source 15 is offset by 7.408947 and 6.122906 pixels which is larger than
2 X fitted extent = 2.636372 x 2.636372, not incorporating fit results
[Mon Jun 25 09:56:46 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 09:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 09:56:46 2012] Assessing source extent using major
[Mon Jun 25 09:56:46 2012] Source does appear to be extended
[Mon Jun 25 09:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 09:57:04 2012] Counts = 1299.598633, rescaling region sizes by 2.000000
[Mon Jun 25 09:57:04 2012] XMMSAS src. selection expression = ellipse(28782.630402, 26234.744812, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 25 09:57:04 2012] Writing source region out to fullrun_pn_xmm0650640101_pi300-10000_pass1_cl_src15_src.reg
[Mon Jun 25 09:57:04 2012] Extracting stamp from image fullrun_pn_xmm0650640101_pi300-10000_cl_sm2.00.img.gz, (256, 227) - (406, 377)
[Mon Jun 25 09:57:04 2012] XMMSAS bgd. selection expression = annulus(28782.630402, 26234.744812, 4350.000000, 8700.000000, X, Y) && !ellipse(27848.092400, 25199.445600, 1952.248856, 1952.248856, 0.000000, X, Y) && !ellipse(27892.821228, 24597.101501, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(27846.675200, 25208.266000, 2016.688858, 2016.688858, 0.000000, X, Y) && !ellipse(29131.665863, 25349.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22748.832062, 32589.602570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33636.316010, 30328.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27815.251892, 27934.048523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28518.473572, 27187.557831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29046.492523, 25699.958191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31422.042000, 24925.450400, 1388.928040, 1134.304033, 54.639500, X, Y) && !ellipse(23426.697600, 24223.919588, 1235.328036, 1235.328036, 0.000000, X, Y) && !ellipse(21840.232000, 23837.786000, 1306.144038, 1306.144038, 0.000000, X, Y) && !ellipse(29197.109680, 24576.750702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21154.920400, 23656.052400, 1363.400039, 1363.400039, 0.000000, X, Y) && !ellipse(29228.691254, 23799.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26752.071960, 22177.048935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23189.744812, 21543.973129, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 25 09:57:04 2012] Writing fullrun_pn_xmm0650640101_pi300-10000_pass1_cl_src15.gif
[Mon Jun 25 10:43:46 2012] Mean detx,y = (-133.26, -546.41) 
[Mon Jun 25 10:44:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 10:46:41 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 10:46:42 2012] Setting source spectrum file to fullrun_pn_xmm0650640101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon Jun 25 10:46:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650640101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jun 26 12:19:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 26 12:19:46 2012] rmf not generated due to insufficient counts
[Tue Jun 26 16:29:02 2012] Updating aperture counts using extracted products
[Tue Jun 26 16:29:02 2012] Error reading totcts from fullrun_pn_xmm0650640101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jun 26 16:29:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 16:29:04 2012] Using photon index=1.80, rate=0.0233, arf fullrun_pn_xmm0650640101_pi300-10000_pass1_cl_src15.arf
[Tue Jun 26 16:29:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 16:29:05 2012] Updating source flux to 8.2e-14
[Tue Jun 26 16:30:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting