[Sun Jun 24 08:13:39 2012] Detection parameters:
  Position = (244.0, 119.9) = 22 8 34.36 54 18 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.0 +/- 21.2
  Background counts = 65.8
  Rate = 0.003 +/- 0.0003

[Sun Jun 24 08:13:40 2012] Off-axis axis estimate = 13.53'
[Sun Jun 24 21:34:54 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 21:34:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 21:34:54 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Sun Jun 24 21:34:54 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.981
[Sun Jun 24 21:34:54 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.19"
[Sun Jun 24 23:10:55 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun 24 23:10:55 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun 24 23:10:55 2012] Fit fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src10 appears to have run properly
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun 24 23:10:56 2012] Fit fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Jun 24 23:11:10 2012] Warning, spatial fit 10 centroid is now closest to src. 19
[Sun Jun 24 23:11:10 2012] Source 3 is offset by -4.619425 and -2.812971 pixels which is larger than
2 X fitted extent = 1.516676 x 1.516676, not incorporating fit results
[Sun Jun 24 23:11:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 23:11:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 23:11:10 2012] Assessing source extent using major
[Sun Jun 24 23:11:10 2012] Source does appear to be extended
[Sun Jun 24 23:11:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 09:32:22 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 09:32:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 25 09:32:22 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Mon Jun 25 09:32:22 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.981
[Mon Jun 25 09:32:22 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.19"
[Mon Jun 25 09:56:39 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 25 09:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src7.csv
[Mon Jun 25 09:56:39 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 25 09:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src7.csv
[Mon Jun 25 09:56:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 09:56:39 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 25 09:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 25 09:56:39 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 25 09:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 25 09:56:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 09:56:50 2012] Spatial fit model total counts = 773.254000, observed total counts = 570.000000
[Mon Jun 25 09:56:50 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 25 09:56:50 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 23.786188 pixels away
[Mon Jun 25 09:56:50 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.008621 pixels away
[Mon Jun 25 09:56:50 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 09:56:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 09:56:50 2012] Assessing source extent using major
[Mon Jun 25 09:56:50 2012] Source does appear to be extended
[Mon Jun 25 09:56:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 16:06:56 2012] XMMSAS src. selection expression = ellipse(21178.437988, 10384.832558, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 16:06:56 2012] Writing source region out to fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 26 16:06:56 2012] Extracting stamp from image fullrun_mos2_xmm0650640101_pi300-10000_cl_sm2.00.img.gz, (206, 82) - (281, 157)
[Tue Jun 26 16:06:56 2012] XMMSAS bgd. selection expression = annulus(21178.437988, 10384.832558, 1087.500000, 2175.000000, X, Y) && !ellipse(19233.058000, 10530.870000, 2150.696062, 1620.440047, 34.515700, X, Y)
[Tue Jun 26 16:06:56 2012] Writing fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 26 16:15:16 2012] Mean detx,y = (-12824.32, -9612.45) 
[Tue Jun 26 16:15:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 16:15:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 16:15:31 2012] Setting source spectrum file to fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 26 16:15:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 26 16:22:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 26 16:22:01 2012] rmf not generated due to insufficient counts
[Tue Jun 26 16:29:06 2012] Updating aperture counts using extracted products
[Tue Jun 26 16:29:06 2012] Error reading totcts from fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 26 16:29:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 16:29:06 2012] Using photon index=1.80, rate=0.00273, arf fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 26 16:29:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 16:29:06 2012] Updating source flux to 7e-14
[Tue Jun 26 16:29:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting