[Sun Jun 24 08:13:40 2012] Detection parameters:
  Position = (223.3, 119.0) = 22 8 44.66 54 18 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.0 +/- 21.0
  Background counts = 46.9
  Rate = 0.003 +/- 0.0003

[Sun Jun 24 08:13:40 2012] Off-axis axis estimate = 14.11'
[Sun Jun 24 21:34:54 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 21:34:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 21:34:54 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Sun Jun 24 21:34:54 2012] source mask rpix=3.1, npix_max = 51, mask sum = 53, frac = 1.023
[Sun Jun 24 21:34:54 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.48"
[Sun Jun 24 23:10:55 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 24 23:10:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src11.csv
[Sun Jun 24 23:10:55 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 24 23:10:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src11.csv
[Sun Jun 24 23:10:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 24 23:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 24 23:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 24 23:10:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 23:11:10 2012] Warning, spatial fit 11 centroid is now closest to src. 16
[Sun Jun 24 23:11:10 2012] Spatial fit model total counts = 755.390000, observed total counts = 749.000000
[Sun Jun 24 23:11:10 2012] Offset between fit and detection position for source 28 = 2.644930 pixels
[Sun Jun 24 23:11:10 2012] Warning, changing simple spatial fit ID from 11 to 21
[Sun Jun 24 23:11:10 2012] 756.711800 total counts/ 690.638000 bgd. counts: snr = 2.514224
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.644930 pixels
  Position = (221.5, 120.9) = 22 8 45.55 54 18 49.9
  Extent = 14.3 (8.6-26.4)", rotation angle = 0
  Source counts = 66.1 +/- 27.5
  Background counts = 690.6
  Rate = 0.001 +/- 0.0005
[Sun Jun 24 23:11:10 2012] Spatial fit model total counts = 504.922000, observed total counts = 460.000000
[Sun Jun 24 23:11:10 2012] Offset between fit and detection position for source 28 = 0.678521 pixels
[Sun Jun 24 23:11:10 2012] Warning, changing simple spatial fit ID from 21 to 26
[Sun Jun 24 23:11:10 2012] 553.486000 total counts/ 164.052000 bgd. counts: snr = 30.404866
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.678521 pixels
  Position = (221.6, 121.6) = 22 8 45.48 54 18 52.8
  Extent = 26.9 (24.8-53.8)" x 20.3 (15.0-25.6)", rotation angle = 35 (183-240) degrees
  Source counts = 389.4 +/- 23.5
  Background counts = 164.1
  Rate = 0.007 +/- 0.0004
[Sun Jun 24 23:11:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 23:11:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 23:11:10 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 23:11:10 2012] Source does appear to be extended
[Sun Jun 24 23:11:10 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Sun Jun 24 23:11:10 2012] Source is confused with source 23
[Mon Jun 25 09:32:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 25 09:32:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 25 09:32:22 2012] Initial guess for spatial extent in simple fitting = 23.57"
[Mon Jun 25 09:32:22 2012] source mask rpix=5.4, npix_max = 140, mask sum = 134, frac = 0.956
[Mon Jun 25 09:32:22 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 23.57"
[Mon Jun 25 09:56:39 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src8.ximg exists
[Mon Jun 25 09:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src8.csv
[Mon Jun 25 09:56:39 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Jun 25 09:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src8.csv
[Mon Jun 25 09:56:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 09:56:39 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Jun 25 09:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Jun 25 09:56:39 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jun 25 09:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Jun 25 09:56:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 09:56:50 2012] Warning, spatial fit 8 centroid is now closest to src. 3
[Mon Jun 25 09:56:50 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 09:56:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 09:56:50 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 09:56:50 2012] Source does appear to be extended
[Mon Jun 25 09:56:50 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Tue Jun 26 16:06:56 2012] XMMSAS src. selection expression = ellipse(19233.058000, 10530.870000, 1613.022046, 1215.330035, 34.515700, X, Y)
[Tue Jun 26 16:06:56 2012] Writing source region out to fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src28_src.reg
[Tue Jun 26 16:06:56 2012] Extracting stamp from image fullrun_mos2_xmm0650640101_pi300-10000_cl_sm2.00.img.gz, (129, 29) - (314, 214)
[Tue Jun 26 16:06:56 2012] XMMSAS bgd. selection expression = annulus(19233.058000, 10530.870000, 2688.370077, 5376.740155, X, Y) && !ellipse(21178.437988, 10384.832558, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 16:06:56 2012] Writing fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src28.gif
[Tue Jun 26 16:15:44 2012] Mean detx,y = (-12082.12, -11133.60) 
[Tue Jun 26 16:15:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 16:16:50 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 16:16:51 2012] Setting source spectrum file to fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jun 26 16:16:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Jun 26 16:29:06 2012] Updating aperture counts using extracted products
[Tue Jun 26 16:29:06 2012] Error reading totcts from fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jun 26 16:29:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 16:29:06 2012] Using photon index=1.80, rate=0.00675, arf fullrun_mos2_xmm0650640101_pi300-10000_pass1_cl_src28.arf
[Tue Jun 26 16:29:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 16:29:06 2012] Updating source flux to 1.6e-13
[Tue Jun 26 16:29:27 2012] Flag c found in src. 28 procflags, skipping spectral fitting