[Sun Jun 24 08:13:40 2012] Detection parameters:
  Position = (213.7, 123.1) = 22 8 49.44 54 19 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.0 +/- 16.5
  Background counts = 49.3
  Rate = 0.001 +/- 0.0002

[Sun Jun 24 08:13:40 2012] Off-axis axis estimate = 14.12'
[Sun Jun 24 21:34:54 2012] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 21:34:54 2012] Initial guess for spatial extent in simple fitting = 13.49"
[Sun Jun 24 21:34:54 2012] source mask rpix=3.1, npix_max = 51, mask sum = 39, frac = 0.752
[Sun Jun 24 21:34:54 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 13.49"
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src27.ximg exists
[Sun Jun 24 23:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src27.csv
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Jun 24 23:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src27.csv
[Sun Jun 24 23:10:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Jun 24 23:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Jun 24 23:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun Jun 24 23:10:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 23:11:10 2012] Source 24 is offset by -3.423900 and -1.627669 pixels which is larger than
2 X fitted extent = 1.810409 x 1.547306, not incorporating fit results
[Sun Jun 24 23:11:10 2012] Warning, spatial fit 27 centroid is now closest to src. 26
[Sun Jun 24 23:11:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 23:11:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 23:11:10 2012] Assessing source extent using major
[Sun Jun 24 23:11:10 2012] Source does appear to be extended
[Sun Jun 24 23:11:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 23:11:10 2012] Deleting source due to low Poisson probability 0.8