[Sun Jun 24 08:13:40 2012] Detection parameters:
  Position = (205.5, 128.1) = 22 8 53.50 54 19 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.5 +/- 16.8
  Background counts = 56.7
  Rate = 0.001 +/- 0.0002

[Sun Jun 24 08:13:40 2012] Off-axis axis estimate = 14.07'
[Sun Jun 24 21:34:54 2012] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 21:34:54 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Sun Jun 24 21:34:54 2012] source mask rpix=3.1, npix_max = 51, mask sum = 37, frac = 0.716
[Sun Jun 24 21:34:54 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.46"
[Sun Jun 24 23:10:55 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jun 24 23:10:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src18.csv
[Sun Jun 24 23:10:55 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jun 24 23:10:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src18.csv
[Sun Jun 24 23:10:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jun 24 23:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jun 24 23:10:56 2012] fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jun 24 23:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jun 24 23:10:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 23:11:10 2012] Warning, spatial fit 18 centroid is now closest to src. 24
[Sun Jun 24 23:11:10 2012] Spatial fit model total counts = 726.297000, observed total counts = 706.000000
[Sun Jun 24 23:11:10 2012] Offset between fit and detection position for source 21 = 1.554511 pixels
[Sun Jun 24 23:11:10 2012] Warning, changing simple spatial fit ID from 18 to 25
[Sun Jun 24 23:11:10 2012] 676.785400 total counts/ 652.845000 bgd. counts: snr = 0.936971
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.554511 pixels
  Position = (205.4, 126.6) = 22 8 53.54 54 19 14.3
  Extent = 6.6 (3.9-21.6)", rotation angle = 0
  Source counts = 23.9 +/- 26.0
  Background counts = 652.8
  Rate = 0.0004 +/- 0.0005
  Deleting source due to low Poisson probability