[Sun Jun 24 08:13:15 2012] Detection parameters:
  Position = (320.6, 290.0) = 22 7 56.21 54 31 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 806293.8 +/- 1057.1
  Background counts = 284.4
  Rate = 1e+01 +/- 0.02

[Sun Jun 24 08:13:15 2012] Off-axis axis estimate = 1.72'
[Sun Jun 24 20:31:04 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 20:31:04 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Jun 24 20:31:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sun Jun 24 20:31:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Jun 24 21:34:53 2012] fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 24 21:34:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 21:34:53 2012] fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 24 21:34:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 21:34:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 21:34:53 2012] fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 24 21:34:53 2012] fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 24 21:34:54 2012] Fit fullrun_mos1_xmm0650640101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 24 23:11:04 2012] Spatial fit model total counts = 604404.000000, observed total counts = 591338.000000
[Sun Jun 24 23:11:04 2012] Offset between fit and detection position for source 1 = 0.300103 pixels
[Sun Jun 24 23:11:04 2012] 612560.000000 total counts/ 25600.000000 bgd. counts: snr = 3668.500000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.300103 pixels
  Position = (320.3, 290.1) = 22 7 56.36 54 31 6.0
  Extent = 9.0 (9.0-9.0)", rotation angle = 0
  Source counts = 586960.0 +/- 782.7
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.01
[Sun Jun 24 23:11:04 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 23:11:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 23:11:04 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 23:11:04 2012] Source does appear to be extended
[Sun Jun 24 23:11:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 08:32:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 25 08:32:26 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Mon Jun 25 08:32:26 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Mon Jun 25 08:32:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.95"
[Mon Jun 25 09:32:21 2012] fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 25 09:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 25 09:32:21 2012] fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 25 09:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 25 09:32:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 09:32:21 2012] fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 25 09:32:21 2012] fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 25 09:32:21 2012] Fit fullrun_mos1_xmm0650640101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 25 09:56:48 2012] Spatial fit model total counts = 566382.000000, observed total counts = 599434.000000
[Mon Jun 25 09:56:48 2012] Offset between fit and detection position for source 1 = 0.215741 pixels
[Mon Jun 25 09:56:48 2012] 556536.000000 total counts/ 28900.000000 bgd. counts: snr = 3103.741176
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.215741 pixels
  Position = (320.5, 290.1) = 22 7 56.26 54 31 6.3
  Extent = 7.1 (7.1-7.1)", rotation angle = 0
  Source counts = 527636.0 +/- 746.0
  Background counts = 28900.0
  Rate = 9 +/- 0.01
[Mon Jun 25 09:56:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 09:56:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 09:56:48 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 09:56:48 2012] Source does appear to be extended
[Mon Jun 25 09:56:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:00:00 2012] Counts = 527636.000000, rescaling region sizes by 3.000000
[Tue Jun 26 14:00:00 2012] XMMSAS src. selection expression = ellipse(27836.390716, 25193.570600, 1283.691637, 1283.691637, 0.000000, X, Y)
[Tue Jun 26 14:00:00 2012] Writing source region out to fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 26 14:00:00 2012] Extracting stamp from image fullrun_mos1_xmm0650640101_pi300-10000_cl_sm2.00.img.gz, (247, 216) - (394, 364)
[Tue Jun 26 14:00:00 2012] XMMSAS bgd. selection expression = annulus(27836.390716, 25193.570600, 6418.458185, 12836.916369, X, Y) && !ellipse(28510.086334, 25273.698547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29302.004578, 16411.225357, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 14:00:00 2012] Writing fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 26 14:00:46 2012] Mean detx,y = (290.07, -220.93) 
[Tue Jun 26 14:00:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 14:05:45 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 14:05:46 2012] Setting source spectrum file to fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 26 14:05:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 26 16:29:05 2012] Updating aperture counts using extracted products
[Tue Jun 26 16:29:05 2012] Error reading totcts from fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 26 16:29:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 16:29:05 2012] Using photon index=1.80, rate=9.07, arf fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 26 16:29:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 16:29:05 2012] Updating source flux to 8.5e-11
[Tue Jun 26 16:29:27 2012] Reading fit data from xmm0650640101/analysis//spectral/fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 26 16:29:27 2012] Spectral fit parameter nH value = 4.93464e+21
[Tue Jun 26 16:29:27 2012] Spectral fit parameter PhoIndex value = 0.782843
[Tue Jun 26 16:29:27 2012] Failed to get F(0.3-8.0) from xmm0650640101/analysis//spectral/fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 26 16:29:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 16:29:27 2012] Using Nh = 4.9e+21, photon index=0.78, rate=9.07, arf fullrun_mos1_xmm0650640101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 26 16:29:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 16:29:27 2012] Updating source flux to 1.8e-10