[Mon May 28 07:29:39 2012] Detection parameters:
  Position = (318.1, 364.6) = 2 27 58.60 52 36 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.3 +/- 17.1
  Background counts = 46.8
  Rate = 0.004 +/- 0.0005

[Mon May 28 07:29:39 2012] Off-axis axis estimate = 5.00'
[Mon May 28 07:53:32 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Mon May 28 07:53:32 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Mon May 28 07:53:32 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.767
[Mon May 28 07:53:32 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.93"
[Mon May 28 08:08:56 2012] fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_src8.ximg exists
[Mon May 28 08:08:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_src8.csv
[Mon May 28 08:08:56 2012] fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon May 28 08:08:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_src8.csv
[Mon May 28 08:08:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:08:56 2012] fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon May 28 08:08:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon May 28 08:08:56 2012] fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon May 28 08:08:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon May 28 08:08:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650620201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:30:25 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.821357 pixels away
[Mon May 28 08:30:25 2012] Vigneting correction estimate = 1.000000
[Mon May 28 08:30:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 08:30:25 2012] Assessing source extent using major
[Mon May 28 08:30:25 2012] Source does appear to be extended
[Mon May 28 08:30:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 08:52:23 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Mon May 28 08:52:23 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Mon May 28 08:52:23 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.767
[Mon May 28 08:52:23 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.93"
[Mon May 28 09:06:25 2012] fullrun_mos1_xmm0650620201_pi300-10000_cl_pass1_src8.ximg exists
[Mon May 28 09:06:25 2012] fullrun_mos1_xmm0650620201_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon May 28 09:06:25 2012] Fit fullrun_mos1_xmm0650620201_pi300-10000_cl_pass1_src8 appears to have run properly
[Mon May 28 09:06:25 2012] fullrun_mos1_xmm0650620201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon May 28 09:06:25 2012] fullrun_mos1_xmm0650620201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon May 28 09:06:25 2012] Fit fullrun_mos1_xmm0650620201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon May 28 09:26:45 2012] Spatial fit model total counts = 470.894000, observed total counts = 439.000000
[Mon May 28 09:26:45 2012] Offset between fit and detection position for source 9 = 0.184780 pixels
[Mon May 28 09:26:45 2012] 479.546700 total counts/ 383.610000 bgd. counts: snr = 4.898237
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.184780 pixels
  Position = (318.0, 364.7) = 2 27 58.68 52 36 33.0
  Extent = 4.9 (3.8-6.5)", rotation angle = 0
  Source counts = 95.9 +/- 21.9
  Background counts = 383.6
  Rate = 0.002 +/- 0.0005
[Mon May 28 09:26:45 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:26:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:26:45 2012] Assessing source extent using major axis lower bound
[Mon May 28 09:26:45 2012] Source does appear to be extended
[Mon May 28 09:26:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:49:08 2012] XMMSAS src. selection expression = ellipse(27613.846200, 31680.447600, 292.771208, 292.771208, 0.000000, X, Y)
[Mon May 28 09:49:08 2012] Writing source region out to fullrun_mos1_xmm0650620201_pi300-10000_pass1_cl_src9_src.reg
[Mon May 28 09:49:08 2012] Extracting stamp from image fullrun_mos1_xmm0650620201_pi300-10000_cl_sm2.00.img.gz, (301, 348) - (335, 382)
[Mon May 28 09:49:08 2012] XMMSAS bgd. selection expression = annulus(27613.846200, 31680.447600, 487.952014, 975.904028, X, Y)
[Mon May 28 09:49:08 2012] Writing fullrun_mos1_xmm0650620201_pi300-10000_pass1_cl_src9.gif
[Mon May 28 09:50:13 2012] Mean detx,y = (4589.36, -768.49) 
[Mon May 28 09:50:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 09:50:18 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 09:50:18 2012] Setting source spectrum file to fullrun_mos1_xmm0650620201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 28 09:50:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650620201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May 28 10:01:41 2012] Not generating rmf since there are only 95 counts
[Mon May 28 10:01:41 2012] rmf not generated due to insufficient counts
[Mon May 28 10:25:34 2012] Updating aperture counts using extracted products
[Mon May 28 10:25:34 2012] Error reading totcts from fullrun_mos1_xmm0650620201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 28 10:25:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:25:34 2012] Using photon index=1.80, rate=0.00227, arf fullrun_mos1_xmm0650620201_pi300-10000_pass1_cl_src9.arf
[Mon May 28 10:25:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:25:34 2012] Updating source flux to 3.2e-14
[Mon May 28 10:25:36 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting