[Mon Aug 13 10:25:45 2012] Detection parameters:
  Position = (321.8, 301.8) = 23 30 37.36 71 22 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1480.8 +/- 47.6
  Background counts = 14.7
  Rate = 0.05 +/- 0.002

[Mon Aug 13 10:25:46 2012] Off-axis axis estimate = 1.71'
[Mon Aug 13 10:50:11 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 10:50:11 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Aug 13 10:50:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.740
[Mon Aug 13 10:50:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Aug 13 11:32:58 2012] fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 13 11:32:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 11:32:58 2012] fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 13 11:32:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 11:32:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 11:32:59 2012] fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 13 11:32:59 2012] fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 13 11:32:59 2012] Fit fullrun_mos1_xmm0650591801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 13 12:05:12 2012] Spatial fit model total counts = 1268.340000, observed total counts = 1366.000000
[Mon Aug 13 12:05:12 2012] Offset between fit and detection position for source 1 = 0.501333 pixels
[Mon Aug 13 12:05:12 2012] 1268.340000 total counts/ 415.453000 bgd. counts: snr = 41.843745
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.501333 pixels
  Position = (321.4, 302.1) = 23 30 37.73 71 22 44.1
  Extent = 4.8 (4.3-5.1)", rotation angle = 0
  Source counts = 852.9 +/- 35.6
  Background counts = 415.5
  Rate = 0.03 +/- 0.001
[Mon Aug 13 12:05:12 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 12:05:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 12:05:12 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 12:05:12 2012] Source does appear to be extended
[Mon Aug 13 12:05:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 12:26:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 12:26:09 2012] Initial guess for spatial extent in simple fitting = 4.75"
[Mon Aug 13 12:26:09 2012] source mask rpix=1.1, npix_max = 10, mask sum = 8, frac = 0.789
[Mon Aug 13 12:26:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.75"
[Mon Aug 13 13:00:20 2012] fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 13 13:00:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 13:00:20 2012] fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 13 13:00:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 13:00:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 13:00:20 2012] fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 13 13:00:20 2012] fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 13 13:00:20 2012] Fit fullrun_mos1_xmm0650591801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 13 13:30:04 2012] Spatial fit model total counts = 1265.470000, observed total counts = 1371.000000
[Mon Aug 13 13:30:04 2012] Offset between fit and detection position for source 1 = 0.026777 pixels
[Mon Aug 13 13:30:04 2012] 1269.215000 total counts/ 434.758000 bgd. counts: snr = 40.020284
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.026777 pixels
  Position = (321.4, 302.1) = 23 30 37.75 71 22 44.0
  Extent = 4.6 (4.3-5.0)", rotation angle = 0
  Source counts = 834.5 +/- 35.6
  Background counts = 434.8
  Rate = 0.03 +/- 0.001
[Mon Aug 13 13:30:04 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 13:30:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 13:30:04 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 13:30:04 2012] Source does appear to be extended
[Mon Aug 13 13:30:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 14:04:05 2012] XMMSAS src. selection expression = ellipse(27910.759800, 26237.724800, 277.354939, 277.354939, 0.000000, X, Y)
[Mon Aug 13 14:04:05 2012] Writing source region out to fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 13 14:04:05 2012] Extracting stamp from image fullrun_mos1_xmm0650591801_pi300-10000_cl_sm2.00.img.gz, (305, 286) - (337, 318)
[Mon Aug 13 14:04:05 2012] XMMSAS bgd. selection expression = annulus(27910.759800, 26237.724800, 462.258232, 924.516463, X, Y) && !ellipse(26503.148000, 27288.413000, 487.957614, 487.957614, 0.000000, X, Y)
[Mon Aug 13 14:04:05 2012] Writing fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1.gif
[Mon Aug 13 14:04:09 2012] Mean detx,y = (253.03, -195.00) 
[Mon Aug 13 14:04:11 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 14:04:24 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 14:04:24 2012] Setting source spectrum file to fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 14:04:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 13 14:40:49 2012] Updating aperture counts using extracted products
[Mon Aug 13 14:40:49 2012] Error reading totcts from fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 14:40:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 14:40:50 2012] Using photon index=1.80, rate=0.0256, arf fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 14:40:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 14:40:50 2012] Updating source flux to 3.5e-13
[Mon Aug 13 14:41:16 2012] Reading fit data from xmm0650591801/analysis//spectral/fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1_pl.csv
[Mon Aug 13 14:41:16 2012] Spectral fit parameter nH value = 6.6727e+22
[Mon Aug 13 14:41:16 2012] Spectral fit parameter PhoIndex value = 1.46982
[Mon Aug 13 14:41:16 2012] Failed to get F(0.3-8.0) from xmm0650591801/analysis//spectral/fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Aug 13 14:41:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 14:41:16 2012] Using Nh = 6.7e+22, photon index=1.47, rate=0.0256, arf fullrun_mos1_xmm0650591801_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 14:41:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 14:41:16 2012] Updating source flux to 1e-12