[Thu May 2 12:16:59 2013] Detection parameters: Position = (278.8, 311.5) = 21 36 10.07 47 28 5.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 53.5 +/- 12.1 Background counts = 41.3 Rate = 0.003 +/- 0.0007 [Thu May 2 12:16:59 2013] Off-axis axis estimate = 1.71' [Thu May 2 12:17:14 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Thu May 2 12:17:14 2013] Initial guess for spatial extent in simple fitting = 7.28" [Thu May 2 12:17:14 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058 [Thu May 2 12:17:14 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.28" [Thu May 2 12:17:15 2013] fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_src15.ximg exists [Thu May 2 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_src15.csv [Thu May 2 12:17:15 2013] fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_src15_1.ximg exists [Thu May 2 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_src15.csv [Thu May 2 12:17:15 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 12:17:15 2013] fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Thu May 2 12:17:15 2013] fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Thu May 2 12:17:15 2013] Fit fullrun_pn_xmm0650591701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Thu May 2 12:17:23 2013] Source 16 is offset by -5.879182 and 6.147859 pixels which is larger than 2 X fitted extent = 0.837016 x 0.837016, not incorporating fit results [Thu May 2 12:17:23 2013] Vigneting correction estimate = 1.000000 [Thu May 2 12:17:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 12:17:23 2013] Assessing source extent using major [Thu May 2 12:17:23 2013] Source does appear to be extended [Thu May 2 12:17:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 12:17:33 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Thu May 2 12:17:33 2013] Initial guess for spatial extent in simple fitting = 7.28" [Thu May 2 12:17:33 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058 [Thu May 2 12:17:33 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 7.28" [Thu May 2 12:17:34 2013] fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_src14.ximg exists [Thu May 2 12:17:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_src14.csv [Thu May 2 12:17:34 2013] fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_src14_1.ximg exists [Thu May 2 12:17:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_src14.csv [Thu May 2 12:17:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 12:17:34 2013] fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists [Thu May 2 12:17:34 2013] fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists [Thu May 2 12:17:34 2013] Fit fullrun_pn_xmm0650591701_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly [Thu May 2 12:17:42 2013] Source 16 is offset by -5.879182 and -6.886785 pixels which is larger than 2 X fitted extent = 0.837016 x 0.837016, not incorporating fit results [Thu May 2 12:17:42 2013] Vigneting correction estimate = 1.000000 [Thu May 2 12:17:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 12:17:42 2013] Assessing source extent using major [Thu May 2 12:17:42 2013] Source does appear to be extended [Thu May 2 12:17:42 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 12:17:52 2013] XMMSAS src. selection expression = ellipse(24208.575134, 27047.799744, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 2 12:17:52 2013] Not overwriting source region fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_src.reg [Thu May 2 12:17:52 2013] Extracting stamp from image fullrun_pn_xmm0650591701_pi300-10000_cl_sm2.00.img.gz, (241, 274) - (316, 349) [Thu May 2 12:17:52 2013] XMMSAS bgd. selection expression = annulus(24208.575134, 27047.799744, 1087.500000, 2175.000000, X, Y) && !ellipse(27448.214960, 27386.523400, 1424.654441, 1424.654441, 0.000000, X, Y) && !ellipse(28634.934000, 29262.926000, 2769.776080, 2769.776080, 0.000000, X, Y) && !ellipse(27313.620000, 25677.916000, 1122.920032, 1122.920032, 0.000000, X, Y) && !ellipse(27133.647461, 25195.037994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26545.974000, 24707.040000, 1122.920032, 1122.920032, 0.000000, X, Y) [Thu May 2 12:17:52 2013] Writing fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16.gif [Thu May 2 12:17:54 2013] ../../xmm0650591701/products/events/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0650591701/products/events/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create [Thu May 2 12:17:54 2013] Mean detx,y = (-2912.15, 604.33) [Thu May 2 12:17:54 2013] ../../xmm0650591701/products/images/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_src.img and ../../xmm0650591701/products/images/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create [Thu May 2 12:17:54 2013] ../../xmm0650591701/products/spectra/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0650591701/products/spectra/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create [Thu May 2 12:17:54 2013] Setting source spectrum file to fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_src_b10.pi.gz [Thu May 2 12:17:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_bgd.pi.gz [Thu May 2 12:17:54 2013] ../../xmm0650591701/products/lightcurves/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0650591701/products/lightcurves/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create [Thu May 2 12:17:59 2013] Not generating rmf since there are only 53 counts [Thu May 2 12:17:59 2013] rmf not generated due to insufficient counts [Thu May 2 12:17:59 2013] fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16.arf exists, delete to re-create [Thu May 2 12:33:37 2013] Updating aperture counts using extracted products [Thu May 2 12:33:37 2013] Total counts from fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 306.00 [Thu May 2 12:33:37 2013] Total counts from fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_bgd.pi.gz = 2132.00 [Thu May 2 12:33:37 2013] Got source and background scale factors 1304528.000000, 8773085.000000 [Thu May 2 12:33:37 2013] User source parameters: Position = (278.8, 311.5) = 21 36 10.07 47 28 5.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -11.0 +/- 18.5 Background aperture counts = 317.0 Rate = -0.0005 +/- 0.0008 [Thu May 2 12:33:37 2013] Updating counts from extracted products [Thu May 2 12:33:37 2013] Set source signif. to -11.02/17.81 = -0.62 [Thu May 2 12:33:41 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 12:33:41 2013] Using photon index=1.80, rate=-0.000495, arf fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16.arf [Thu May 2 12:33:41 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 12:33:41 2013] Updated flux is not positive, keeping original flux [Thu May 2 12:33:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 12:33:54 2013] xmm0650591701/analysis//spectral/fullrun_pn_xmm0650591701_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete