[Thu May 31 10:18:29 2012] Detection parameters:
  Position = (406.7, 351.9) = 20 18 3.81 40 43 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 498.2 +/- 32.6
  Background counts = 111.9
  Rate = 0.03 +/- 0.002

[Thu May 31 10:18:30 2012] Off-axis axis estimate = 8.76'
[Thu May 31 10:21:36 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Thu May 31 10:21:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 10:21:36 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Thu May 31 10:21:36 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Thu May 31 10:21:36 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.81"
[Thu May 31 11:34:19 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 31 11:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src4.csv
[Thu May 31 11:34:19 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 31 11:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src4.csv
[Thu May 31 11:34:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:34:20 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 31 11:34:20 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 31 11:34:20 2012] Fit fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu May 31 13:27:08 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Thu May 31 13:27:08 2012] Source 4 is offset by 0.259501 and 3.448832 pixels which is larger than
2 X fitted extent = 1.182612 x 1.182612, not incorporating fit results
[Thu May 31 13:27:08 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.735362 pixels away
[Thu May 31 13:27:08 2012] Spatial fit model total counts = 2130.670000, observed total counts = 2171.000000
[Thu May 31 13:27:08 2012] Offset between fit and detection position for source 4 = 1.333499 pixels
[Thu May 31 13:27:08 2012] Warning, changing simple spatial fit ID from 4 to 26
[Thu May 31 13:27:08 2012] 1027.348170 total counts/ 2.498170 bgd. counts: snr = 648.409413
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.333499 pixels
  Position = (406.2, 353.1) = 20 18 4.02 40 43 45.9
  Extent = 21.1 (21.1-42.2)", rotation angle = 0
  Source counts = 1024.8 +/- 32.1
  Background counts = 2.5
  Rate = 0.05 +/- 0.002
[Thu May 31 13:27:08 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:08 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:27:08 2012] Source does appear to be extended
[Thu May 31 13:27:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:27:08 2012] Source is confused with source 2
[Thu May 31 13:27:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 13:27:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 13:27:31 2012] Initial guess for spatial extent in simple fitting = 21.11"
[Thu May 31 13:27:31 2012] source mask rpix=4.9, npix_max = 114, mask sum = 110, frac = 0.960
[Thu May 31 13:27:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 21.11"
[Thu May 31 14:33:48 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 31 14:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src3.csv
[Thu May 31 14:33:48 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 31 14:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src3.csv
[Thu May 31 14:33:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 14:33:48 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 31 14:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 31 14:33:48 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 31 14:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 31 14:33:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 16:08:34 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Thu May 31 16:08:34 2012] Spatial fit model total counts = 2125.370000, observed total counts = 2171.000000
[Thu May 31 16:08:34 2012] Offset between fit and detection position for source 4 = 1.667390 pixels
[Thu May 31 16:08:34 2012] Warning, changing simple spatial fit ID from 3 to 24
[Thu May 31 16:08:34 2012] 1583.890000 total counts/ 1322.490000 bgd. counts: snr = 7.188022
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.667390 pixels
  Position = (406.6, 351.5) = 20 18 3.85 40 43 39.0
  Extent = 6.3 (5.3-7.1)", rotation angle = 0
  Source counts = 261.4 +/- 39.8
  Background counts = 1322.5
  Rate = 0.01 +/- 0.002
[Thu May 31 16:08:34 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:34 2012] Assessing source extent using major axis lower bound
[Thu May 31 16:08:34 2012] Source does appear to be extended
[Thu May 31 16:08:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 16:08:56 2012] XMMSAS src. selection expression = ellipse(35328.396000, 30533.904000, 379.531211, 379.531211, 0.000000, X, Y)
[Thu May 31 16:08:56 2012] Writing source region out to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src4_src.reg
[Thu May 31 16:08:56 2012] Extracting stamp from image fullrun_pn_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (385, 330) - (428, 373)
[Thu May 31 16:08:56 2012] XMMSAS bgd. selection expression = annulus(35328.396000, 30533.904000, 632.552018, 1265.104036, X, Y) && !ellipse(34638.988000, 30649.682000, 538.435215, 538.435215, 0.000000, X, Y) && !ellipse(34337.684000, 30091.929200, 509.181615, 509.181615, 0.000000, X, Y) && !ellipse(34487.131000, 29346.248200, 445.491213, 445.491213, 0.000000, X, Y) && !ellipse(37034.920776, 28923.936371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34902.568512, 30075.088043, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 16:08:56 2012] Writing fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src4.gif
[Thu May 31 16:24:15 2012] Mean detx,y = (7069.73, -5126.90) 
[Thu May 31 16:24:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 16:24:30 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 16:24:31 2012] Setting source spectrum file to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 16:24:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 31 20:02:44 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:44 2012] Error reading totcts from fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 20:02:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:45 2012] Using photon index=1.80, rate=0.0136, arf fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src4.arf
[Thu May 31 20:02:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:45 2012] Updating source flux to 5.4e-14
[Thu May 31 20:04:04 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Thu May 31 20:04:04 2012] Flag c found in src. 4 procflags, skipping spectral fitting