[Thu May 31 10:18:29 2012] Detection parameters:
  Position = (398.3, 357.3) = 20 18 7.02 40 43 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4300.7 +/- 94.1
  Background counts = 112.9
  Rate = 0.2 +/- 0.004

[Thu May 31 10:18:30 2012] Off-axis axis estimate = 8.41'
[Thu May 31 10:21:36 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Thu May 31 10:21:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 10:21:36 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Thu May 31 10:21:36 2012] source mask rpix=2.4, npix_max = 34, mask sum = 26, frac = 0.750
[Thu May 31 10:21:36 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.63"
[Thu May 31 11:34:19 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 31 11:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src2.csv
[Thu May 31 11:34:19 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 31 11:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src2.csv
[Thu May 31 11:34:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:34:20 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 31 11:34:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 31 11:34:20 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 31 11:34:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 31 11:34:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:27:08 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.532004 pixels away
[Thu May 31 13:27:08 2012] Spatial fit model total counts = 2248.050000, observed total counts = 2106.000000
[Thu May 31 13:27:08 2012] Offset between fit and detection position for source 2 = 2.343676 pixels
[Thu May 31 13:27:08 2012] Warning, changing simple spatial fit ID from 2 to 4
[Thu May 31 13:27:08 2012] 2187.652000 total counts/ 1396.980000 bgd. counts: snr = 21.154427
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.343676 pixels
  Position = (398.1, 355.0) = 20 18 7.09 40 43 54.2
  Extent = 6.5 (5.8-7.2)", rotation angle = 0
  Source counts = 790.7 +/- 46.8
  Background counts = 1397.0
  Rate = 0.04 +/- 0.002
[Thu May 31 13:27:08 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:08 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:27:08 2012] Source does appear to be extended
[Thu May 31 13:27:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:27:08 2012] Source is confused with source 4
[Thu May 31 13:27:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 13:27:31 2012] Initial guess for spatial extent in simple fitting = 6.51"
[Thu May 31 13:27:31 2012] source mask rpix=1.5, npix_max = 15, mask sum = 7, frac = 0.439
[Thu May 31 13:27:31 2012] Skipping simple spatial due to low active detector fraction
[Thu May 31 16:08:34 2012] Spatial fit model total counts = 1794.100000, observed total counts = 1847.000000
[Thu May 31 16:08:34 2012] Offset between fit and detection position for source 2 = 2.221360 pixels
[Thu May 31 16:08:34 2012] Warning, changing simple spatial fit ID from -1 to 4
[Thu May 31 16:08:34 2012] 1698.859000 total counts/ 1503.770000 bgd. counts: snr = 5.030858
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.221360 pixels
  Position = (398.7, 352.9) = 20 18 6.88 40 43 44.8
  Extent = 6.7 (3.8-8.3)", rotation angle = 0
  Source counts = 195.1 +/- 41.2
  Background counts = 1503.8
  Rate = 0.01 +/- 0.002
[Thu May 31 16:08:34 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:34 2012] Assessing source extent using major axis lower bound
[Thu May 31 16:08:34 2012] Source does appear to be extended
[Thu May 31 16:08:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 16:08:56 2012] XMMSAS src. selection expression = ellipse(34638.988000, 30649.682000, 403.826412, 403.826412, 0.000000, X, Y)
[Thu May 31 16:08:56 2012] Writing source region out to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2_src.reg
[Thu May 31 16:08:56 2012] Extracting stamp from image fullrun_pn_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (375, 330) - (422, 376)
[Thu May 31 16:08:56 2012] XMMSAS bgd. selection expression = annulus(34638.988000, 30649.682000, 673.044019, 1346.088039, X, Y) && !ellipse(35328.396000, 30533.904000, 506.041615, 506.041615, 0.000000, X, Y) && !ellipse(34337.684000, 30091.929200, 509.181615, 509.181615, 0.000000, X, Y) && !ellipse(34487.131000, 29346.248200, 445.491213, 445.491213, 0.000000, X, Y) && !ellipse(34902.568512, 30075.088043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33544.771440, 29649.481000, 431.433612, 431.433612, 0.000000, X, Y)
[Thu May 31 16:08:56 2012] Writing fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2.gif
[Thu May 31 16:23:03 2012] Mean detx,y = (6320.58, -5238.27) 
[Thu May 31 16:23:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 16:23:18 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 16:23:18 2012] Setting source spectrum file to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 16:23:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 31 20:02:44 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:44 2012] Error reading totcts from fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 20:02:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:45 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2.arf
[Thu May 31 20:02:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:45 2012] Updating source flux to 4.9e-14
[Thu May 31 20:04:04 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu May 31 20:04:54 2012] Reading fit data from xmm0650591601/analysis//spectral/fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2_pl.csv
[Thu May 31 20:04:54 2012] Spectral fit parameter nH value = 9.92146e+21
[Thu May 31 20:04:54 2012] Spectral fit parameter PhoIndex value = 8.75074
[Thu May 31 20:04:54 2012] Failed to get F(0.3-8.0) from xmm0650591601/analysis//spectral/fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu May 31 20:04:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:04:54 2012] Using Nh = 9.9e+21, photon index=8.75, rate=0.0101, arf fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src2.arf
[Thu May 31 20:04:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:04:54 2012] Updating source flux to 2.8e-14