[Thu May 31 10:18:29 2012] Detection parameters:
  Position = (315.6, 315.0) = 20 18 38.69 40 41 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10858.9 +/- 125.0
  Background counts = 121.0
  Rate = 0.5 +/- 0.006

[Thu May 31 10:18:30 2012] Off-axis axis estimate = 1.73'
[Thu May 31 10:21:36 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 31 10:21:36 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 31 10:21:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Thu May 31 10:21:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu May 31 11:34:19 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 11:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src1.csv
[Thu May 31 11:34:19 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 11:34:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src1.csv
[Thu May 31 11:34:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:34:20 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 11:34:20 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 11:34:20 2012] Fit fullrun_pn_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 13:27:08 2012] Source 1 is offset by -6.107245 and -7.725989 pixels which is larger than
2 X fitted extent = 0.838239 x 0.838239, not incorporating fit results
[Thu May 31 13:27:08 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:08 2012] Assessing source extent using major
[Thu May 31 13:27:08 2012] Source does appear to be extended
[Thu May 31 13:27:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:27:31 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 31 13:27:31 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 31 13:27:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Thu May 31 13:27:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Thu May 31 14:33:47 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 14:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src1.csv
[Thu May 31 14:33:47 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 14:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src1.csv
[Thu May 31 14:33:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 14:33:48 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 14:33:48 2012] fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 14:33:48 2012] Fit fullrun_pn_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 16:08:34 2012] Source 1 is offset by 7.304571 and 5.685827 pixels which is larger than
2 X fitted extent = 0.838239 x 0.838239, not incorporating fit results
[Thu May 31 16:08:34 2012] Source 1 is offset by 0.236387 and 5.342195 pixels which is larger than
2 X fitted extent = 1.420285 x 1.420285, not incorporating fit results
[Thu May 31 16:08:34 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:34 2012] Assessing source extent using major
[Thu May 31 16:08:34 2012] Source does appear to be extended
[Thu May 31 16:08:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 16:08:56 2012] Counts = 10858.903320, rescaling region sizes by 3.000000
[Thu May 31 16:08:56 2012] XMMSAS src. selection expression = ellipse(27408.583710, 27354.752991, 1957.500000, 1957.500000, 0.000000, X, Y)
[Thu May 31 16:08:56 2012] Writing source region out to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src1_src.reg
[Thu May 31 16:08:56 2012] Extracting stamp from image fullrun_pn_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (203, 202) - (428, 427)
[Thu May 31 16:08:56 2012] XMMSAS bgd. selection expression = annulus(27408.583710, 27354.752991, 9787.500000, 19575.000000, X, Y) && !ellipse(34638.988000, 30649.682000, 538.435215, 538.435215, 0.000000, X, Y) && !ellipse(16488.492020, 30428.299866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.396000, 30533.904000, 506.041615, 506.041615, 0.000000, X, Y) && !ellipse(34337.684000, 30091.929200, 509.181615, 509.181615, 0.000000, X, Y) && !ellipse(11299.091232, 25001.159790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37463.561981, 33531.057373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38300.854675, 32027.901917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20573.988708, 29450.229553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34487.131000, 29346.248200, 445.491213, 445.491213, 0.000000, X, Y) && !ellipse(18610.448517, 21874.485779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29134.265137, 36046.899414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18388.436295, 37146.493073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38059.220459, 26377.110138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.997345, 40016.446991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37034.920776, 28923.936371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15741.337570, 40289.490204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24220.682140, 34015.982800, 678.686420, 304.776809, 317.367631, X, Y) && !ellipse(13168.533203, 29054.298309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35416.004000, 40578.786200, 986.192028, 285.968008, 27.213100, X, Y) && !ellipse(35909.618469, 40748.003143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33838.005310, 40421.567291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25072.041107, 38307.386047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27542.213989, 35936.136902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18555.955368, 34640.185242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34902.568512, 30075.088043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32289.345000, 30024.996000, 361.915210, 361.915210, 0.000000, X, Y) && !ellipse(22351.419312, 29964.126404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33544.771440, 29649.481000, 431.433612, 431.433612, 0.000000, X, Y) && !ellipse(38556.656200, 29600.749600, 450.594413, 450.594413, 0.000000, X, Y) && !ellipse(18694.590378, 29467.471313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32407.866765, 27865.037504, 535.789587, 361.734651, 0.000000, X, Y) && !ellipse(26460.488678, 27870.391541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40068.121826, 27368.097168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30816.874023, 21654.286942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24325.016754, 26531.072632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15097.247375, 25244.971130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19514.636002, 24915.152771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30475.293884, 24197.453217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25878.360130, 23113.692400, 399.061611, 399.061611, 0.000000, X, Y) && !ellipse(28739.077301, 13638.618088, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 16:08:56 2012] Writing fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src1.gif
[Thu May 31 16:09:18 2012] Mean detx,y = (38.55, -225.26) 
[Thu May 31 16:09:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 16:22:49 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 16:22:50 2012] Setting source spectrum file to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 16:22:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 31 16:46:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 16:46:38 2012] rmf not generated due to insufficient counts
[Thu May 31 20:02:44 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:44 2012] Error reading totcts from fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 20:02:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:45 2012] Using photon index=1.80, rate=0.51, arf fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src1.arf
[Thu May 31 20:02:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:45 2012] Updating source flux to 1.1e-12
[Thu May 31 20:04:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 31 20:04:54 2012] xmm0650591601/analysis//spectral/fullrun_pn_xmm0650591601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete