[Thu May 31 10:19:22 2012] Detection parameters:
  Position = (398.5, 355.2) = 20 18 6.95 40 43 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1147.3 +/- 40.8
  Background counts = 23.8
  Rate = 0.07 +/- 0.002

[Thu May 31 10:19:23 2012] Off-axis axis estimate = 8.34'
[Thu May 31 12:19:43 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:19:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 12:19:43 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Thu May 31 12:19:43 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.870
[Thu May 31 12:19:43 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.60"
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src2.csv
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src2.csv
[Thu May 31 13:26:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 31 13:26:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:27:19 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.011968 pixels away
[Thu May 31 13:27:19 2012] Spatial fit model total counts = 1203.450000, observed total counts = 1077.000000
[Thu May 31 13:27:19 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 13:27:20 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:20 2012] Assessing source extent using major
[Thu May 31 13:27:20 2012] Source does appear to be extended
[Thu May 31 13:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 15:13:02 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu May 31 15:13:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 15:13:02 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Thu May 31 15:13:02 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.870
[Thu May 31 15:13:02 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.60"
[Thu May 31 16:08:25 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 31 16:08:25 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 31 16:08:25 2012] Fit fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 31 16:08:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 31 16:08:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 31 16:08:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 16:08:45 2012] Spatial fit model total counts = 1675.640000, observed total counts = 1569.000000
[Thu May 31 16:08:45 2012] Offset between fit and detection position for source 7 = 0.550272 pixels
[Thu May 31 16:08:45 2012] 1671.773000 total counts/ 733.026000 bgd. counts: snr = 34.672797
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.550272 pixels
  Position = (398.0, 355.5) = 20 18 7.13 40 43 56.2
  Extent = 9.9" x 4.5", rotation angle = 45
  Source counts = 938.7 +/- 40.9
  Background counts = 733.0
  Rate = 0.04 +/- 0.002
[Thu May 31 16:08:45 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:45 2012] Assessing source extent using major
[Thu May 31 16:08:45 2012] Source does appear to be extended
[Thu May 31 16:08:45 2012] Computing asymmetry using major and minor axis, asym = 2.18
[Thu May 31 16:08:45 2012] Source is asymmetric
[Thu May 31 19:40:57 2012] XMMSAS src. selection expression = ellipse(34581.183460, 30877.892000, 595.551017, 272.760008, 44.723000, X, Y)
[Thu May 31 19:40:57 2012] Writing source region out to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src7_src.reg
[Thu May 31 19:40:57 2012] Extracting stamp from image fullrun_mos2_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (364, 321) - (432, 390)
[Thu May 31 19:40:57 2012] XMMSAS bgd. selection expression = annulus(34581.183460, 30877.892000, 992.585029, 1985.170057, X, Y) && !ellipse(35335.696716, 30554.785461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34304.408860, 30136.653400, 207.090406, 207.090406, 0.000000, X, Y) && !ellipse(34499.386440, 29352.270400, 335.640010, 335.640010, 0.000000, X, Y) && !ellipse(37069.967163, 28925.863922, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 19:40:57 2012] Writing fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src7.gif
[Thu May 31 19:41:18 2012] Mean detx,y = (-6101.69, 5198.43) 
[Thu May 31 19:41:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 19:41:48 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 19:41:48 2012] Setting source spectrum file to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 19:41:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 31 20:02:46 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:46 2012] Error reading totcts from fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 20:02:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:47 2012] Using photon index=1.80, rate=0.0354, arf fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src7.arf
[Thu May 31 20:02:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:47 2012] Updating source flux to 7e-13
[Thu May 31 20:03:26 2012] Flag p found in src. 7 procflags, skipping spectral fitting