[Thu May 31 10:19:22 2012] Detection parameters:
  Position = (130.5, 287.2) = 20 19 49.44 40 39 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.6 +/- 12.2
  Background counts = 14.1
  Rate = 0.003 +/- 0.0005

[Thu May 31 10:19:23 2012] Off-axis axis estimate = 12.20'
[Thu May 31 12:19:43 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:19:43 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Thu May 31 12:19:43 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.072
[Thu May 31 12:19:43 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.53"
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src26.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src26.csv
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src26.csv
[Thu May 31 13:26:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu May 31 13:26:59 2012] Fit fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Thu May 31 13:27:20 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.381645 pixels away
[Thu May 31 13:27:20 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:20 2012] Assessing source extent using major
[Thu May 31 13:27:20 2012] Source does appear to be extended
[Thu May 31 13:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 15:13:02 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Thu May 31 15:13:02 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Thu May 31 15:13:02 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.072
[Thu May 31 15:13:02 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.53"
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src26.ximg exists
[Thu May 31 16:08:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src26.csv
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu May 31 16:08:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src26.csv
[Thu May 31 16:08:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu May 31 16:08:26 2012] Fit fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Thu May 31 16:08:45 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.381645 pixels away
[Thu May 31 16:08:45 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:45 2012] Assessing source extent using major
[Thu May 31 16:08:45 2012] Source does appear to be extended
[Thu May 31 16:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:40:57 2012] XMMSAS src. selection expression = ellipse(11303.984451, 24937.436432, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 19:40:57 2012] Writing source region out to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src6_src.reg
[Thu May 31 19:40:57 2012] Extracting stamp from image fullrun_mos2_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (93, 250) - (168, 325)
[Thu May 31 19:40:57 2012] XMMSAS bgd. selection expression = annulus(11303.984451, 24937.436432, 1087.500000, 2175.000000, X, Y)
[Thu May 31 19:40:57 2012] Writing fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src6.gif
[Thu May 31 19:48:14 2012] Mean detx,y = (15152.63, -5978.98) 
[Thu May 31 19:48:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 19:48:28 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 19:48:28 2012] Setting source spectrum file to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 31 19:48:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 31 20:00:44 2012] Not generating rmf since there are only 83 counts
[Thu May 31 20:00:44 2012] rmf not generated due to insufficient counts
[Thu May 31 20:02:47 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:47 2012] Error reading totcts from fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 31 20:02:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:47 2012] Using photon index=1.80, rate=0.00315, arf fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src6.arf
[Thu May 31 20:02:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:47 2012] Updating source flux to 1e-13
[Thu May 31 20:03:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting