[Thu May 31 10:19:22 2012] Detection parameters:
  Position = (395.2, 347.0) = 20 18 8.21 40 43 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.5 +/- 18.1
  Background counts = 24.7
  Rate = 0.01 +/- 0.001

[Thu May 31 10:19:23 2012] Off-axis axis estimate = 7.85'
[Thu May 31 12:19:43 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:19:43 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Thu May 31 12:19:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Thu May 31 12:19:43 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.35"
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src4.csv
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src4.csv
[Thu May 31 13:26:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 31 13:26:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:27:19 2012] Source 3 is offset by -1.822956 and 3.930584 pixels which is larger than
2 X fitted extent = 1.241821 x 1.241821, not incorporating fit results
[Thu May 31 13:27:19 2012] Warning, spatial fit 4 centroid is now closest to src. 7
[Thu May 31 13:27:20 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:20 2012] Assessing source extent using major
[Thu May 31 13:27:20 2012] Source does appear to be extended
[Thu May 31 13:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 15:13:02 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Thu May 31 15:13:02 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Thu May 31 15:13:02 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Thu May 31 15:13:02 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.35"
[Thu May 31 16:08:25 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 31 16:08:25 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 31 16:08:25 2012] Fit fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 31 16:08:26 2012] Fit fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu May 31 16:08:45 2012] Source 3 is offset by -1.822956 and 3.930584 pixels which is larger than
2 X fitted extent = 1.241821 x 1.241821, not incorporating fit results
[Thu May 31 16:08:45 2012] Spatial fit model total counts = 1171.550000, observed total counts = 1077.000000
[Thu May 31 16:08:45 2012] Offset between fit and detection position for source 3 = 0.383588 pixels
[Thu May 31 16:08:45 2012] 703.938300 total counts/ 647.228000 bgd. counts: snr = 2.229119
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.383588 pixels
  Position = (394.9, 347.0) = 20 18 8.35 40 43 19.2
  Extent = 2.6" x 2.6", rotation angle = 0
  Source counts = 56.7 +/- 26.5
  Background counts = 647.2
  Rate = 0.002 +/- 0.001
[Thu May 31 16:08:45 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:45 2012] Assessing source extent using major
[Thu May 31 16:08:45 2012] Source does appear to be extended
[Thu May 31 16:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:40:57 2012] XMMSAS src. selection expression = ellipse(34304.408860, 30136.653400, 155.317804, 155.317804, 0.000000, X, Y)
[Thu May 31 19:40:57 2012] Writing source region out to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src3_src.reg
[Thu May 31 19:40:57 2012] Extracting stamp from image fullrun_mos2_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (386, 338) - (404, 356)
[Thu May 31 19:40:57 2012] XMMSAS bgd. selection expression = annulus(34304.408860, 30136.653400, 258.863007, 517.726015, X, Y) && !ellipse(34581.183460, 30877.892000, 794.068023, 363.680010, 44.723000, X, Y) && !ellipse(35335.696716, 30554.785461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34499.386440, 29352.270400, 335.640010, 335.640010, 0.000000, X, Y)
[Thu May 31 19:40:57 2012] Writing fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src3.gif
[Thu May 31 19:42:28 2012] Mean detx,y = (-5992.56, 4409.65) 
[Thu May 31 19:42:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 19:42:36 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 19:42:36 2012] Setting source spectrum file to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 31 19:42:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 31 19:58:37 2012] Not generating rmf since there are only 56 counts
[Thu May 31 19:58:37 2012] rmf not generated due to insufficient counts
[Thu May 31 20:02:46 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:46 2012] Error reading totcts from fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 31 20:02:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:47 2012] Using photon index=1.80, rate=0.00214, arf fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src3.arf
[Thu May 31 20:02:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:47 2012] Updating source flux to 7.5e-14
[Thu May 31 20:03:26 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Thu May 31 20:03:26 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting