[Thu May 31 10:19:22 2012] Detection parameters:
  Position = (315.6, 315.0) = 20 18 38.70 40 41 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4730.3 +/- 81.4
  Background counts = 25.3
  Rate = 0.2 +/- 0.003

[Thu May 31 10:19:23 2012] Off-axis axis estimate = 1.73'
[Thu May 31 12:19:43 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:19:43 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 31 12:19:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Thu May 31 12:19:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu May 31 13:26:58 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src1.csv
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 13:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src1.csv
[Thu May 31 13:26:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 13:26:59 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 13:26:59 2012] Fit fullrun_mos2_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 13:27:19 2012] Spatial fit model total counts = 4486.200000, observed total counts = 4386.000000
[Thu May 31 13:27:19 2012] Offset between fit and detection position for source 1 = 0.180321 pixels
[Thu May 31 13:27:19 2012] 4497.340000 total counts/ 1203.500000 bgd. counts: snr = 94.946608
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.180321 pixels
  Position = (315.4, 315.0) = 20 18 38.77 40 41 0.4
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 3293.8 +/- 67.1
  Background counts = 1203.5
  Rate = 0.1 +/- 0.003
[Thu May 31 13:27:20 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:20 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:27:20 2012] Source does appear to be extended
[Thu May 31 13:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 15:13:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 15:13:02 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Thu May 31 15:13:02 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.006
[Thu May 31 15:13:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Thu May 31 16:08:25 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 16:08:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src1.csv
[Thu May 31 16:08:25 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 16:08:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src1.csv
[Thu May 31 16:08:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 16:08:26 2012] fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 16:08:26 2012] Fit fullrun_mos2_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 16:08:45 2012] Spatial fit model total counts = 4492.060000, observed total counts = 4386.000000
[Thu May 31 16:08:45 2012] Offset between fit and detection position for source 1 = 0.004744 pixels
[Thu May 31 16:08:45 2012] 4502.870000 total counts/ 1209.690000 bgd. counts: snr = 94.684398
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004744 pixels
  Position = (315.4, 315.0) = 20 18 38.77 40 41 0.4
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 3293.2 +/- 67.1
  Background counts = 1209.7
  Rate = 0.1 +/- 0.003
[Thu May 31 16:08:45 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:45 2012] Assessing source extent using major axis lower bound
[Thu May 31 16:08:45 2012] Source does appear to be extended
[Thu May 31 16:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:40:57 2012] Counts = 3293.180000, rescaling region sizes by 2.000000
[Thu May 31 19:40:57 2012] XMMSAS src. selection expression = ellipse(27390.735800, 27353.026800, 637.324818, 637.324818, 0.000000, X, Y)
[Thu May 31 19:40:57 2012] Writing source region out to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1_src.reg
[Thu May 31 19:40:57 2012] Extracting stamp from image fullrun_mos2_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (279, 278) - (352, 352)
[Thu May 31 19:40:57 2012] XMMSAS bgd. selection expression = annulus(27390.735800, 27353.026800, 2124.416061, 4248.832122, X, Y) && !ellipse(26437.089905, 27872.279266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25853.019600, 23095.859800, 378.652011, 378.652011, 0.000000, X, Y) && !ellipse(23239.026000, 26379.732200, 334.698410, 334.698410, 0.000000, X, Y) && !ellipse(24585.883300, 23945.335460, 712.120020, 712.120020, 0.000000, X, Y) && !ellipse(31399.674194, 23773.952148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29734.033600, 28629.541412, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 19:40:57 2012] Writing fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1.gif
[Thu May 31 19:41:00 2012] Mean detx,y = (91.89, 111.29) 
[Thu May 31 19:41:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 19:41:15 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 19:41:15 2012] Setting source spectrum file to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 19:41:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 31 20:02:46 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:46 2012] Error reading totcts from fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 20:02:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:47 2012] Using photon index=1.80, rate=0.124, arf fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1.arf
[Thu May 31 20:02:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:47 2012] Updating source flux to 1.3e-12
[Thu May 31 20:04:04 2012] Reading fit data from xmm0650591601/analysis//spectral/fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 31 20:04:04 2012] Spectral fit parameter nH value = 5.94765e+22
[Thu May 31 20:04:04 2012] Spectral fit parameter PhoIndex value = 1.38337
[Thu May 31 20:04:04 2012] Failed to get F(0.3-8.0) from xmm0650591601/analysis//spectral/fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 31 20:04:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:04:04 2012] Using Nh = 5.9e+22, photon index=1.38, rate=0.124, arf fullrun_mos2_xmm0650591601_pi300-10000_pass1_cl_src1.arf
[Thu May 31 20:04:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:04:04 2012] Updating source flux to 3.9e-12