[Thu May 31 10:18:54 2012] Detection parameters:
  Position = (311.5, 459.6) = 20 18 40.23 40 51 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.5 +/- 11.7
  Background counts = 25.0
  Rate = 0.002 +/- 0.0004

[Thu May 31 10:18:55 2012] Off-axis axis estimate = 11.72'
[Thu May 31 11:34:21 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Thu May 31 11:34:21 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Thu May 31 11:34:21 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.108
[Thu May 31 11:34:21 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 12.29"
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src29.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src29.csv
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src29.csv
[Thu May 31 12:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu May 31 12:19:43 2012] Fit fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu May 31 13:27:13 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.032463 pixels away
[Thu May 31 13:27:13 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:13 2012] Assessing source extent using major
[Thu May 31 13:27:13 2012] Source does appear to be extended
[Thu May 31 13:27:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 14:33:49 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Thu May 31 14:33:49 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Thu May 31 14:33:49 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.108
[Thu May 31 14:33:49 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 12.29"
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src28.ximg exists
[Thu May 31 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src28.csv
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu May 31 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src28.csv
[Thu May 31 15:13:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu May 31 15:13:02 2012] Fit fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Thu May 31 16:08:39 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.191120 pixels away
[Thu May 31 16:08:39 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:39 2012] Assessing source extent using major
[Thu May 31 16:08:39 2012] Source does appear to be extended
[Thu May 31 16:08:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:17:29 2012] XMMSAS src. selection expression = ellipse(27055.016113, 39935.139374, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 19:17:29 2012] Writing source region out to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src7_src.reg
[Thu May 31 19:17:29 2012] Extracting stamp from image fullrun_mos1_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (274, 422) - (349, 497)
[Thu May 31 19:17:29 2012] XMMSAS bgd. selection expression = annulus(27055.016113, 39935.139374, 1087.500000, 2175.000000, X, Y)
[Thu May 31 19:17:29 2012] Writing fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src7.gif
[Thu May 31 19:26:13 2012] Mean detx,y = (12495.56, -3478.91) 
[Thu May 31 19:26:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 19:26:19 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 19:26:19 2012] Setting source spectrum file to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 19:26:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 31 19:40:45 2012] Not generating rmf since there are only 61 counts
[Thu May 31 19:40:45 2012] rmf not generated due to insufficient counts
[Thu May 31 20:02:46 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:46 2012] Error reading totcts from fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 20:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:46 2012] Using photon index=1.80, rate=0.00232, arf fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src7.arf
[Thu May 31 20:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:46 2012] Updating source flux to 5e-14
[Thu May 31 20:02:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting