[Thu May 31 10:18:55 2012] Detection parameters:
  Position = (236.9, 340.1) = 20 19 8.79 40 42 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.3 +/- 11.6
  Background counts = 26.1
  Rate = 0.003 +/- 0.0007

[Thu May 31 10:18:55 2012] Off-axis axis estimate = 5.39'
[Thu May 31 11:34:21 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu May 31 11:34:21 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu May 31 11:34:21 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.112
[Thu May 31 11:34:21 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.12"
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src15.ximg exists
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May 31 12:19:43 2012] Fit fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src15 appears to have run properly
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 31 12:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:27:13 2012] Source 20 is offset by 0.099532 and -9.316428 pixels which is larger than
2 X fitted extent = 1.053058 x 1.053058, not incorporating fit results
[Thu May 31 13:27:13 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:13 2012] Assessing source extent using major
[Thu May 31 13:27:13 2012] Source does appear to be extended
[Thu May 31 13:27:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 14:33:49 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu May 31 14:33:49 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu May 31 14:33:49 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.112
[Thu May 31 14:33:49 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.12"
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src15.ximg exists
[Thu May 31 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src15.csv
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu May 31 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src15.csv
[Thu May 31 15:13:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu May 31 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May 31 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May 31 15:13:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 16:08:39 2012] Spatial fit model total counts = 363.016000, observed total counts = 255.000000
[Thu May 31 16:08:39 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 16:08:39 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:39 2012] Assessing source extent using major
[Thu May 31 16:08:39 2012] Source does appear to be extended
[Thu May 31 16:08:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:17:29 2012] XMMSAS src. selection expression = ellipse(20562.342422, 29540.898804, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 19:17:29 2012] Writing source region out to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src20_src.reg
[Thu May 31 19:17:29 2012] Extracting stamp from image fullrun_mos1_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (199, 303) - (274, 378)
[Thu May 31 19:17:29 2012] XMMSAS bgd. selection expression = annulus(20562.342422, 29540.898804, 1087.500000, 2175.000000, X, Y) && !ellipse(22321.290039, 29921.988434, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 19:17:29 2012] Writing fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src20.gif
[Thu May 31 19:22:39 2012] Mean detx,y = (854.67, -7466.56) 
[Thu May 31 19:22:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 19:23:06 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 19:23:06 2012] Setting source spectrum file to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu May 31 19:23:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu May 31 19:36:20 2012] Not generating rmf since there are only 57 counts
[Thu May 31 19:36:20 2012] rmf not generated due to insufficient counts
[Thu May 31 20:02:46 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:46 2012] Error reading totcts from fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu May 31 20:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:46 2012] Using photon index=1.80, rate=0.00343, arf fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src20.arf
[Thu May 31 20:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:46 2012] Updating source flux to 5e-14
[Thu May 31 20:02:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting