[Thu May 31 10:18:55 2012] Detection parameters:
  Position = (444.0, 340.7) = 20 17 49.57 40 42 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 12.3
  Background counts = 22.0
  Rate = 0.004 +/- 0.0008

[Thu May 31 10:18:55 2012] Off-axis axis estimate = 10.99'
[Thu May 31 11:34:21 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Thu May 31 11:34:21 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Thu May 31 11:34:21 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.857
[Thu May 31 11:34:21 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.92"
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src11.csv
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src11.csv
[Thu May 31 12:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 31 12:19:43 2012] Fit fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 31 13:27:13 2012] Source 19 is offset by 7.610636 and -3.592550 pixels which is larger than
2 X fitted extent = 1.292552 x 1.292552, not incorporating fit results
[Thu May 31 13:27:13 2012] Spatial fit model total counts = 328.999000, observed total counts = 329.000000
[Thu May 31 13:27:13 2012] Offset between fit and detection position for source 19 = 0.250718 pixels
[Thu May 31 13:27:13 2012] 329.812100 total counts/ 284.896000 bgd. counts: snr = 2.661086
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.250718 pixels
  Position = (443.7, 340.7) = 20 17 49.67 40 42 51.4
  Extent = 5.5 (3.9-7.9)", rotation angle = 0
  Source counts = 44.9 +/- 18.2
  Background counts = 284.9
  Rate = 0.002 +/- 0.0007
[Thu May 31 13:27:13 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:13 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:27:13 2012] Source does appear to be extended
[Thu May 31 13:27:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 14:33:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 14:33:49 2012] Initial guess for spatial extent in simple fitting = 5.47"
[Thu May 31 14:33:49 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.728
[Thu May 31 14:33:49 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 5.47"
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src11.ximg exists
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May 31 15:13:02 2012] Fit fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May 31 15:13:02 2012] Fit fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May 31 16:08:39 2012] Spatial fit model total counts = 296.772000, observed total counts = 298.000000
[Thu May 31 16:08:39 2012] Offset between fit and detection position for source 19 = 0.040677 pixels
[Thu May 31 16:08:39 2012] 297.944600 total counts/ 254.137000 bgd. counts: snr = 2.747992
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.040677 pixels
  Position = (443.7, 340.6) = 20 17 49.67 40 42 51.3
  Extent = 5.7 (3.8-7.9)", rotation angle = 0
  Source counts = 43.8 +/- 17.3
  Background counts = 254.1
  Rate = 0.002 +/- 0.0007
[Thu May 31 16:08:39 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:39 2012] Assessing source extent using major axis lower bound
[Thu May 31 16:08:39 2012] Source does appear to be extended
[Thu May 31 16:08:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:17:29 2012] XMMSAS src. selection expression = ellipse(38554.884400, 29587.297600, 342.207010, 342.207010, 0.000000, X, Y)
[Thu May 31 19:17:29 2012] Writing source region out to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src19_src.reg
[Thu May 31 19:17:29 2012] Extracting stamp from image fullrun_mos1_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (424, 321) - (463, 360)
[Thu May 31 19:17:29 2012] XMMSAS bgd. selection expression = annulus(38554.884400, 29587.297600, 570.345016, 1140.690033, X, Y) && !ellipse(37073.795715, 28936.107025, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 19:17:29 2012] Writing fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src19.gif
[Thu May 31 19:21:33 2012] Mean detx,y = (5027.54, 10114.34) 
[Thu May 31 19:21:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 19:21:41 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 19:21:41 2012] Setting source spectrum file to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 31 19:21:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu May 31 19:36:01 2012] Not generating rmf since there are only 43 counts
[Thu May 31 19:36:01 2012] rmf not generated due to insufficient counts
[Thu May 31 20:02:46 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:46 2012] Error reading totcts from fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 31 20:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:46 2012] Using photon index=1.80, rate=0.00166, arf fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src19.arf
[Thu May 31 20:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:46 2012] Updating source flux to 3e-14
[Thu May 31 20:02:49 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Thu May 31 20:02:49 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting