[Thu May 31 10:18:54 2012] Detection parameters:
  Position = (214.3, 251.3) = 20 19 17.37 40 36 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 12.9
  Background counts = 20.5
  Rate = 0.006 +/- 0.0009

[Thu May 31 10:18:55 2012] Off-axis axis estimate = 6.99'
[Thu May 31 11:34:21 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu May 31 11:34:21 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Thu May 31 11:34:21 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.808
[Thu May 31 11:34:21 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.92"
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src10.csv
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src10.csv
[Thu May 31 12:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 31 12:19:43 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 31 12:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 31 12:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:27:13 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.155364 pixels away
[Thu May 31 13:27:13 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:27:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:27:13 2012] Assessing source extent using major
[Thu May 31 13:27:13 2012] Source does appear to be extended
[Thu May 31 13:27:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 14:33:49 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu May 31 14:33:49 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Thu May 31 14:33:49 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.808
[Thu May 31 14:33:49 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.92"
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 31 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src10.csv
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 31 15:13:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src10.csv
[Thu May 31 15:13:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 31 15:13:02 2012] fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 31 15:13:02 2012] Fit fullrun_mos1_xmm0650591601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May 31 16:08:39 2012] Spatial fit model total counts = 265.580000, observed total counts = 264.000000
[Thu May 31 16:08:39 2012] Offset between fit and detection position for source 16 = 0.599832 pixels
[Thu May 31 16:08:39 2012] 267.250600 total counts/ 178.220000 bgd. counts: snr = 6.669006
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.599832 pixels
  Position = (214.8, 251.7) = 20 19 17.21 40 36 25.0
  Extent = 8.1 (6.1-10.7)", rotation angle = 0
  Source counts = 89.0 +/- 16.3
  Background counts = 178.2
  Rate = 0.003 +/- 0.0006
[Thu May 31 16:08:39 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:08:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:08:39 2012] Assessing source extent using major axis lower bound
[Thu May 31 16:08:39 2012] Source does appear to be extended
[Thu May 31 16:08:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:17:29 2012] XMMSAS src. selection expression = ellipse(18635.623200, 21851.457400, 488.690414, 488.690414, 0.000000, X, Y)
[Thu May 31 19:17:29 2012] Writing source region out to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src16_src.reg
[Thu May 31 19:17:29 2012] Extracting stamp from image fullrun_mos1_xmm0650591601_pi300-10000_cl_sm2.00.img.gz, (187, 224) - (243, 280)
[Thu May 31 19:17:29 2012] XMMSAS bgd. selection expression = annulus(18635.623200, 21851.457400, 814.484023, 1628.968047, X, Y)
[Thu May 31 19:17:29 2012] Writing fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src16.gif
[Thu May 31 19:21:17 2012] Mean detx,y = (-7000.53, -7537.86) 
[Thu May 31 19:21:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 19:21:31 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 19:21:31 2012] Setting source spectrum file to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May 31 19:21:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu May 31 19:35:57 2012] Not generating rmf since there are only 89 counts
[Thu May 31 19:35:57 2012] rmf not generated due to insufficient counts
[Thu May 31 20:02:46 2012] Updating aperture counts using extracted products
[Thu May 31 20:02:46 2012] Error reading totcts from fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May 31 20:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 20:02:46 2012] Using photon index=1.80, rate=0.00337, arf fullrun_mos1_xmm0650591601_pi300-10000_pass1_cl_src16.arf
[Thu May 31 20:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 20:02:46 2012] Updating source flux to 6.3e-14
[Thu May 31 20:02:49 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting