[Sat Aug 18 12:28:03 2012] Detection parameters:
  Position = (300.9, 275.1) = 10 31 52.10 -34 51 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1318.3 +/- 43.6
  Background counts = 12.1
  Rate = 0.06 +/- 0.002

[Sat Aug 18 12:28:04 2012] Off-axis axis estimate = 1.70'
[Sat Aug 18 13:52:57 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 13:52:57 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Aug 18 13:52:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Aug 18 13:52:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Aug 18 14:22:47 2012] fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 18 14:22:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 14:22:47 2012] fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 18 14:22:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 14:22:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 14:22:47 2012] fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 18 14:22:47 2012] fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 18 14:22:47 2012] Fit fullrun_mos2_xmm0650591001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 18 14:23:03 2012] Spatial fit model total counts = 1392.520000, observed total counts = 1347.000000
[Sat Aug 18 14:23:03 2012] Offset between fit and detection position for source 3 = 0.078839 pixels
[Sat Aug 18 14:23:03 2012] 1388.235000 total counts/ 501.351000 bgd. counts: snr = 39.609182
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.078839 pixels
  Position = (300.9, 275.1) = 10 31 52.08 -34 51 13.6
  Extent = 5.4 (5.0-5.8)", rotation angle = 0
  Source counts = 886.9 +/- 37.3
  Background counts = 501.4
  Rate = 0.04 +/- 0.002
[Sat Aug 18 14:23:03 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 14:23:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 14:23:03 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 14:23:03 2012] Source does appear to be extended
[Sat Aug 18 14:23:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 15:46:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 15:46:19 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Sat Aug 18 15:46:19 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.322
[Sat Aug 18 15:46:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Sat Aug 18 16:15:04 2012] fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 18 16:15:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 16:15:04 2012] fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 18 16:15:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 16:15:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 16:15:04 2012] fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 18 16:15:04 2012] fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 18 16:15:04 2012] Fit fullrun_mos2_xmm0650591001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 18 16:15:17 2012] Spatial fit model total counts = 1380.930000, observed total counts = 1344.000000
[Sat Aug 18 16:15:17 2012] Offset between fit and detection position for source 3 = 0.025557 pixels
[Sat Aug 18 16:15:17 2012] 1390.357000 total counts/ 513.596000 bgd. counts: snr = 38.687477
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.025557 pixels
  Position = (300.9, 275.1) = 10 31 52.09 -34 51 13.6
  Extent = 5.3 (4.9-5.7)", rotation angle = 0
  Source counts = 876.8 +/- 37.3
  Background counts = 513.6
  Rate = 0.04 +/- 0.002
[Sat Aug 18 16:15:17 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 16:15:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 16:15:17 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 16:15:17 2012] Source does appear to be extended
[Sat Aug 18 16:15:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 17:09:40 2012] XMMSAS src. selection expression = ellipse(26130.708400, 23885.499000, 318.875409, 318.875409, 0.000000, X, Y)
[Sat Aug 18 17:09:40 2012] Writing source region out to fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug 18 17:09:40 2012] Extracting stamp from image fullrun_mos2_xmm0650591001_pi300-10000_cl_sm2.00.img.gz, (283, 257) - (319, 293)
[Sat Aug 18 17:09:40 2012] XMMSAS bgd. selection expression = annulus(26130.708400, 23885.499000, 531.459015, 1062.918031, X, Y) && !ellipse(24948.935200, 23506.516000, 396.799975, 396.799975, 0.000000, X, Y)
[Sat Aug 18 17:09:40 2012] Writing fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3.gif
[Sat Aug 18 17:09:42 2012] Mean detx,y = (22.28, 49.65) 
[Sat Aug 18 17:09:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 17:09:51 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 17:09:51 2012] Setting source spectrum file to fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 18 17:09:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug 18 17:30:31 2012] Updating aperture counts using extracted products
[Sat Aug 18 17:30:31 2012] Error reading totcts from fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 18 17:30:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 17:30:31 2012] Using photon index=1.80, rate=0.0375, arf fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3.arf
[Sat Aug 18 17:30:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 17:30:31 2012] Updating source flux to 4.9e-13
[Sat Aug 18 17:31:23 2012] Reading fit data from xmm0650591001/analysis//spectral/fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3_pl.csv
[Sat Aug 18 17:31:23 2012] Spectral fit parameter nH value = 1.5339e+12
[Sat Aug 18 17:31:23 2012] Spectral fit parameter PhoIndex value = -1.45857
[Sat Aug 18 17:31:23 2012] Failed to get F(0.3-8.0) from xmm0650591001/analysis//spectral/fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Aug 18 17:31:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 17:31:23 2012] Using Nh = 1.5e+12, photon index=-1.46, rate=0.0375, arf fullrun_mos2_xmm0650591001_pi300-10000_pass1_cl_src3.arf
[Sat Aug 18 17:31:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 17:31:23 2012] Updating source flux to 1.9e-12