[Tue Jun 19 14:28:09 2012] Detection parameters:
  Position = (251.2, 369.1) = 12 23 36.91 2 47 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.6 +/- 23.4
  Background counts = 62.5
  Rate = 0.02 +/- 0.002

[Tue Jun 19 14:28:10 2012] Off-axis axis estimate = 6.16'
[Tue Jun 19 14:30:46 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 14:30:46 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Tue Jun 19 14:30:46 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.040
[Tue Jun 19 14:30:46 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.51"
[Tue Jun 19 16:35:22 2012] fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jun 19 16:35:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_src16.csv
[Tue Jun 19 16:35:22 2012] fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jun 19 16:35:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_src16.csv
[Tue Jun 19 16:35:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 16:35:22 2012] fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jun 19 16:35:22 2012] fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jun 19 16:35:23 2012] Fit fullrun_pn_xmm0650590401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Jun 19 17:39:15 2012] Warning, spatial fit 16 centroid is now closest to src. 20
[Tue Jun 19 17:39:15 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 17:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 17:39:15 2012] Assessing source extent using major
[Tue Jun 19 17:39:15 2012] Source does appear to be extended
[Tue Jun 19 17:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 17:39:15 2012] Source is confused with source 14
[Tue Jun 19 17:39:29 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:39:29 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Tue Jun 19 17:39:29 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.040
[Tue Jun 19 17:39:29 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.51"
[Tue Jun 19 19:57:52 2012] fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jun 19 19:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_src15.csv
[Tue Jun 19 19:57:52 2012] fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jun 19 19:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_src15.csv
[Tue Jun 19 19:57:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:57:52 2012] fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 19 19:57:52 2012] fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 19 19:57:52 2012] Fit fullrun_pn_xmm0650590401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jun 19 20:40:53 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 34.044657 pixels away
[Tue Jun 19 20:40:53 2012] Spatial fit model total counts = 798.698000, observed total counts = 799.000000
[Tue Jun 19 20:40:53 2012] Offset between fit and detection position for source 16 = 7.001495 pixels
[Tue Jun 19 20:40:53 2012] 784.987000 total counts/ 267.348000 bgd. counts: snr = 31.658368
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 7.001495 pixels
  Position = (247.6, 375.1) = 12 23 37.96 2 48 0.3
  Extent = 18.4 (17.4-19.0)", rotation angle = 0
  Source counts = 517.6 +/- 28.0
  Background counts = 267.3
  Rate = 0.04 +/- 0.002
[Tue Jun 19 20:40:53 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 20:40:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 20:40:53 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 20:40:53 2012] Source does appear to be extended
[Tue Jun 19 20:40:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 20:41:05 2012] XMMSAS src. selection expression = ellipse(21495.138000, 32585.072000, 1104.096032, 1104.096032, 0.000000, X, Y)
[Tue Jun 19 20:41:05 2012] Writing source region out to fullrun_pn_xmm0650590401_pi300-10000_pass1_cl_src16_src.reg
[Tue Jun 19 20:41:05 2012] Extracting stamp from image fullrun_pn_xmm0650590401_pi300-10000_cl_sm2.00.img.gz, (184, 312) - (311, 439)
[Tue Jun 19 20:41:05 2012] XMMSAS bgd. selection expression = annulus(21495.138000, 32585.072000, 1840.160053, 3680.320106, X, Y) && !ellipse(17690.823364, 28881.925842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19356.184000, 36965.162000, 1782.120051, 1782.120051, 0.000000, X, Y) && !ellipse(19735.314800, 36401.250000, 2205.432063, 2205.432063, 0.000000, X, Y) && !ellipse(23801.994568, 36313.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19960.748000, 35850.598000, 1750.224050, 1750.224050, 0.000000, X, Y) && !ellipse(20198.960000, 35318.168000, 1439.624041, 1439.624041, 0.000000, X, Y) && !ellipse(20689.450000, 34380.127800, 1685.392048, 399.922412, 64.056000, X, Y) && !ellipse(21256.598000, 33193.886000, 1271.912037, 1271.912037, 0.000000, X, Y) && !ellipse(21413.921400, 32804.100000, 1572.976045, 424.012012, 62.053100, X, Y) && !ellipse(23556.560000, 32348.201000, 499.551214, 499.551214, 0.000000, X, Y) && !ellipse(21993.931900, 31587.080000, 1669.952048, 400.802412, 64.373000, X, Y) && !ellipse(25652.016327, 30851.336304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.463800, 31109.636000, 1361.680039, 1361.680039, 0.000000, X, Y) && !ellipse(22829.456000, 29711.342000, 1320.296038, 1320.296038, 0.000000, X, Y) && !ellipse(23050.972200, 29331.987000, 2563.280074, 400.630412, 63.708500, X, Y) && !ellipse(23235.680000, 29125.392000, 1536.640044, 1536.640044, 0.000000, X, Y) && !ellipse(23421.103200, 28572.058400, 1678.536048, 424.512812, 63.662100, X, Y) && !ellipse(23866.963164, 27559.232720, 1678.536048, 516.306296, 63.742368, X, Y)
[Tue Jun 19 20:41:05 2012] Writing fullrun_pn_xmm0650590401_pi300-10000_pass1_cl_src16.gif
[Tue Jun 19 20:58:07 2012] Mean detx,y = (139.79, 9349.79) 
[Tue Jun 19 20:58:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 20:59:24 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 20:59:24 2012] Setting source spectrum file to fullrun_pn_xmm0650590401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jun 19 20:59:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650590401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jun 19 23:37:31 2012] Updating aperture counts using extracted products
[Tue Jun 19 23:37:31 2012] Error reading totcts from fullrun_pn_xmm0650590401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jun 19 23:37:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 23:37:32 2012] Using photon index=1.80, rate=0.0351, arf fullrun_pn_xmm0650590401_pi300-10000_pass1_cl_src16.arf
[Tue Jun 19 23:37:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 23:37:32 2012] Updating source flux to 1.3e-13
[Tue Jun 19 23:39:04 2012] Flag c found in src. 16 procflags, skipping spectral fitting