[Tue Jun 19 14:28:29 2012] Detection parameters:
  Position = (223.3, 117.2) = 12 23 45.03 2 29 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.3 +/- 18.5
  Background counts = 33.6
  Rate = 0.007 +/- 0.0008

[Tue Jun 19 14:28:29 2012] Off-axis axis estimate = 14.23'
[Tue Jun 19 16:35:23 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 16:35:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 16:35:23 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Tue Jun 19 16:35:23 2012] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.900
[Tue Jun 19 16:35:23 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.54"
[Tue Jun 19 16:54:37 2012] fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jun 19 16:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_src5.csv
[Tue Jun 19 16:54:37 2012] fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jun 19 16:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_src5.csv
[Tue Jun 19 16:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 16:54:37 2012] fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 19 16:54:37 2012] fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 19 16:54:37 2012] Fit fullrun_mos1_xmm0650590401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jun 19 17:39:17 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.847488 pixels away
[Tue Jun 19 17:39:17 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 17:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 17:39:17 2012] Assessing source extent using major
[Tue Jun 19 17:39:17 2012] Source does appear to be extended
[Tue Jun 19 17:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:57:53 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 19:57:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 19:57:53 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Tue Jun 19 19:57:53 2012] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.900
[Tue Jun 19 19:57:53 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.54"
[Tue Jun 19 20:11:04 2012] fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jun 19 20:11:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_src5.csv
[Tue Jun 19 20:11:04 2012] fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jun 19 20:11:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_src5.csv
[Tue Jun 19 20:11:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 20:11:04 2012] fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 19 20:11:04 2012] fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 19 20:11:04 2012] Fit fullrun_mos1_xmm0650590401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jun 19 20:40:55 2012] Spatial fit model total counts = 239.637000, observed total counts = 236.000000
[Tue Jun 19 20:40:55 2012] Offset between fit and detection position for source 11 = 0.319490 pixels
[Tue Jun 19 20:40:55 2012] 240.527000 total counts/ 136.865000 bgd. counts: snr = 8.860809
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.319490 pixels
  Position = (223.3, 117.5) = 12 23 45.02 2 29 19.7
  Extent = 6.7 (5.5-7.7)", rotation angle = 0
  Source counts = 103.7 +/- 15.5
  Background counts = 136.9
  Rate = 0.006 +/- 0.0009
[Tue Jun 19 20:40:55 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 20:40:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 20:40:55 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 20:40:55 2012] Source does appear to be extended
[Tue Jun 19 20:40:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 22:32:57 2012] XMMSAS src. selection expression = ellipse(19380.076200, 10173.200260, 400.185012, 400.185012, 0.000000, X, Y)
[Tue Jun 19 22:32:57 2012] Writing source region out to fullrun_mos1_xmm0650590401_pi300-10000_pass1_cl_src11_src.reg
[Tue Jun 19 22:32:57 2012] Extracting stamp from image fullrun_mos1_xmm0650590401_pi300-10000_cl_sm2.00.img.gz, (200, 94) - (246, 140)
[Tue Jun 19 22:32:57 2012] XMMSAS bgd. selection expression = annulus(19380.076200, 10173.200260, 666.975019, 1333.950038, X, Y)
[Tue Jun 19 22:32:57 2012] Writing fullrun_mos1_xmm0650590401_pi300-10000_pass1_cl_src11.gif
[Tue Jun 19 22:38:43 2012] Mean detx,y = (10141.16, 11157.43) 
[Tue Jun 19 22:38:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 22:38:51 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 22:38:51 2012] Setting source spectrum file to fullrun_mos1_xmm0650590401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jun 19 22:38:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650590401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jun 19 23:37:32 2012] Updating aperture counts using extracted products
[Tue Jun 19 23:37:32 2012] Error reading totcts from fullrun_mos1_xmm0650590401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jun 19 23:37:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 23:37:33 2012] Using photon index=1.80, rate=0.00579, arf fullrun_mos1_xmm0650590401_pi300-10000_pass1_cl_src11.arf
[Tue Jun 19 23:37:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 23:37:33 2012] Updating source flux to 1.5e-13