[Fri Jun 7 15:55:44 2013] Detection parameters: Position = (362.8, 221.3) = 0 42 28.14 41 10 0.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 753.2 +/- 33.7 Background counts = 16.5 Rate = 0.04 +/- 0.002 [Fri Jun 7 15:55:45 2013] Off-axis axis estimate = 7.28' [Fri Jun 7 15:56:45 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting [Fri Jun 7 15:56:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Jun 7 15:56:45 2013] Initial guess for spatial extent in simple fitting = 10.07" [Fri Jun 7 15:56:45 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946 [Fri Jun 7 15:56:45 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.07" [Fri Jun 7 15:56:46 2013] fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_src17.ximg exists [Fri Jun 7 15:56:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_src17.csv [Fri Jun 7 15:56:46 2013] fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_src17_1.ximg exists [Fri Jun 7 15:56:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_src17.csv [Fri Jun 7 15:56:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 15:56:48 2013] fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Fri Jun 7 15:56:48 2013] fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Fri Jun 7 15:56:48 2013] Fit fullrun_mos2_xmm0650560601_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly [Fri Jun 7 15:57:45 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 13.023141 pixels away [Fri Jun 7 15:57:45 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 15:57:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 15:57:45 2013] Assessing source extent using major [Fri Jun 7 15:57:45 2013] Source does appear to be extended [Fri Jun 7 15:57:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 15:58:16 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting [Fri Jun 7 15:58:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Jun 7 15:58:16 2013] Initial guess for spatial extent in simple fitting = 10.07" [Fri Jun 7 15:58:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946 [Fri Jun 7 15:58:16 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.07" [Fri Jun 7 15:58:17 2013] fullrun_mos2_xmm0650560601_pi300-10000_cl_pass1_src17.ximg exists [Fri Jun 7 15:58:17 2013] fullrun_mos2_xmm0650560601_pi300-10000_cl_pass1_src17_1.ximg exists [Fri Jun 7 15:58:17 2013] Fit fullrun_mos2_xmm0650560601_pi300-10000_cl_pass1_src17 appears to have run properly [Fri Jun 7 15:58:19 2013] fullrun_mos2_xmm0650560601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Fri Jun 7 15:58:19 2013] fullrun_mos2_xmm0650560601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Fri Jun 7 15:58:19 2013] Fit fullrun_mos2_xmm0650560601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly [Fri Jun 7 15:59:05 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 13.023141 pixels away [Fri Jun 7 15:59:05 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 15:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 15:59:05 2013] Assessing source extent using major [Fri Jun 7 15:59:05 2013] Source does appear to be extended [Fri Jun 7 15:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 18:39:28 2013] XMMSAS src. selection expression = ellipse(31518.818634, 19206.628708, 652.500000, 652.500000, 0.000000, X, Y) [Fri Jun 7 18:39:28 2013] Writing source region out to fullrun_mos2_xmm0650560601_pi300-10000_pass1_cl_src50_src.reg [Fri Jun 7 18:39:28 2013] Extracting stamp from image fullrun_mos2_xmm0650560601_pi300-10000_cl_sm2.00.img.gz, (325, 184) - (400, 259) [Fri Jun 7 18:39:28 2013] XMMSAS bgd. selection expression = annulus(31518.818634, 19206.628708, 1087.500000, 2175.000000, X, Y) && !ellipse(33730.261566, 22071.881897, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jun 7 18:39:28 2013] Writing fullrun_mos2_xmm0650560601_pi300-10000_pass1_cl_src50.gif [Fri Jun 7 18:46:10 2013] Mean detx,y = (-7329.99, -3481.71) [Fri Jun 7 18:46:11 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 7 18:46:27 2013] Binned source spectrum to 10 counts/bin [Fri Jun 7 18:46:27 2013] Setting source spectrum file to fullrun_mos2_xmm0650560601_pi300-10000_pass1_cl_src50_src_b10.pi.gz [Fri Jun 7 18:46:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0650560601_pi300-10000_pass1_cl_src50_bgd.pi.gz [Fri Jun 7 20:01:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri Jun 7 20:01:07 2013] rmf not generated due to insufficient counts [Fri Jun 7 21:09:24 2013] Updating aperture counts using extracted products [Fri Jun 7 21:09:24 2013] Total counts from fullrun_mos2_xmm0650560601_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 788.00 [Fri Jun 7 21:09:24 2013] Total counts from fullrun_mos2_xmm0650560601_pi300-10000_pass1_cl_src50_bgd.pi.gz = 1004.00 [Fri Jun 7 21:09:24 2013] Got source and background scale factors 1340800.000000, 10982804.000000 [Fri Jun 7 21:09:24 2013] User source parameters: Position = (362.8, 221.3) = 0 42 28.14 41 10 0.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 665.4 +/- 29.1 Background aperture counts = 122.6 Rate = 0.03 +/- 0.001 [Fri Jun 7 21:09:24 2013] Updating counts from extracted products [Fri Jun 7 21:09:24 2013] Set source signif. to 665.43/11.07 = 60.10 [Fri Jun 7 21:09:33 2013] Calculating source flux in energy range 0.30-8.00 [Fri Jun 7 21:09:33 2013] Using photon index=1.80, rate=0.0282, arf fullrun_mos2_xmm0650560601_pi300-10000_pass1_cl_src50.arf [Fri Jun 7 21:09:33 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jun 7 21:09:33 2013] Updating source flux to 4.4e-13 [Fri Jun 7 21:10:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Jun 7 21:10:28 2013] xmm0650560601/analysis//spectral/fullrun_mos2_xmm0650560601_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete