[Fri Jun  7 15:55:40 2013] Detection parameters:
  Position = (331.6, 342.0) = 0 42 40.14 41 18 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.2 +/- 22.4
  Background counts = 29.7
  Rate = 0.01 +/- 0.001

[Fri Jun  7 15:55:42 2013] Off-axis axis estimate = 3.97'
[Fri Jun  7 15:56:41 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 15:56:41 2013] Initial guess for spatial extent in simple fitting = 8.41"
[Fri Jun  7 15:56:41 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Fri Jun  7 15:56:41 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 8.41"
[Fri Jun  7 15:56:43 2013] fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_src44.ximg exists
[Fri Jun  7 15:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_src44.csv
[Fri Jun  7 15:56:43 2013] fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri Jun  7 15:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_src44.csv
[Fri Jun  7 15:56:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 15:56:44 2013] fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri Jun  7 15:56:44 2013] fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri Jun  7 15:56:44 2013] Fit fullrun_mos1_xmm0650560601_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Fri Jun  7 15:57:28 2013] Spatial fit model total counts = 608.828000, observed total counts = 597.000000
[Fri Jun  7 15:57:28 2013] Offset between fit and detection position for source 37 = 0.173834 pixels
[Fri Jun  7 15:57:28 2013] 595.464000 total counts/ 400.440000 bgd. counts: snr = 9.745841
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.173834 pixels
  Position = (331.4, 342.1) = 0 42 40.21 41 18 45.4
  Extent = 4.9 (4.2-5.6)", rotation angle = 0
  Source counts = 195.0 +/- 24.4
  Background counts = 400.4
  Rate = 0.008 +/- 0.001
[Fri Jun  7 15:57:28 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 15:57:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 15:57:28 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 15:57:28 2013] Source does appear to be extended
[Fri Jun  7 15:57:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 15:58:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 15:58:14 2013] Initial guess for spatial extent in simple fitting = 4.85"
[Fri Jun  7 15:58:14 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.150
[Fri Jun  7 15:58:14 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 4.85"
[Fri Jun  7 15:58:15 2013] fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_src44.ximg exists
[Fri Jun  7 15:58:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_src44.csv
[Fri Jun  7 15:58:15 2013] fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Jun  7 15:58:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_src44.csv
[Fri Jun  7 15:58:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 15:58:16 2013] fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Jun  7 15:58:16 2013] fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Jun  7 15:58:16 2013] Fit fullrun_mos1_xmm0650560601_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Fri Jun  7 15:58:52 2013] Spatial fit model total counts = 608.816000, observed total counts = 597.000000
[Fri Jun  7 15:58:52 2013] Offset between fit and detection position for source 37 = 0.000003 pixels
[Fri Jun  7 15:58:52 2013] 595.454000 total counts/ 400.436000 bgd. counts: snr = 9.745590
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.000003 pixels
  Position = (331.4, 342.1) = 0 42 40.21 41 18 45.4
  Extent = 4.9 (4.2-5.6)", rotation angle = 0
  Source counts = 195.0 +/- 24.4
  Background counts = 400.4
  Rate = 0.008 +/- 0.001
[Fri Jun  7 15:58:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 15:58:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 15:58:53 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 15:58:53 2013] Source does appear to be extended
[Fri Jun  7 15:58:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 15:59:58 2013] XMMSAS src. selection expression = ellipse(28786.125600, 29711.459400, 291.102608, 291.102608, 0.000000, X, Y)
[Fri Jun  7 15:59:58 2013] Not overwriting source region fullrun_mos1_xmm0650560601_pi300-10000_pass1_cl_src37_src.reg
[Fri Jun  7 15:59:58 2013] Extracting stamp from image fullrun_mos1_xmm0650560601_pi300-10000_cl_sm2.00.img.gz, (315, 325) - (348, 359)
[Fri Jun  7 15:59:58 2013] XMMSAS bgd. selection expression = annulus(28786.125600, 29711.459400, 485.171014, 970.342028, X, Y)
[Fri Jun  7 15:59:58 2013] Writing fullrun_mos1_xmm0650560601_pi300-10000_pass1_cl_src37.gif
[Fri Jun  7 16:00:37 2013] Mean detx,y = (3347.57, -1399.54) 
[Fri Jun  7 16:00:38 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 16:00:45 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 16:00:45 2013] Setting source spectrum file to fullrun_mos1_xmm0650560601_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Fri Jun  7 16:00:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650560601_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Fri Jun  7 21:09:16 2013] Updating aperture counts using extracted products
[Fri Jun  7 21:09:16 2013] Total counts from fullrun_mos1_xmm0650560601_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 253.00
[Fri Jun  7 21:09:16 2013] Total counts from fullrun_mos1_xmm0650560601_pi300-10000_pass1_cl_src37_bgd.pi.gz = 425.00
[Fri Jun  7 21:09:16 2013] Got source and background scale factors 265600.000000, 2039852.000000
[Fri Jun  7 21:09:16 2013] User source parameters:
  Position = (331.4, 342.1) = 0 42 40.21 41 18 45.4
  Extent = 4.9 (4.2-5.6)", rotation angle = 0
  Source aperture counts = 197.7 +/- 16.9
  Background aperture counts = 55.3
  Rate = 0.008 +/- 0.0007

[Fri Jun  7 21:09:21 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 21:09:21 2013] Using photon index=1.80, rate=0.00826, arf fullrun_mos1_xmm0650560601_pi300-10000_pass1_cl_src37.arf
[Fri Jun  7 21:09:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 21:09:21 2013] Updating source flux to 1.2e-13
[Fri Jun  7 21:10:05 2013] xmm0650560601/analysis//spectral/fullrun_mos1_xmm0650560601_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete