[Mon Jun 25 10:21:30 2012] Detection parameters:
  Position = (331.2, 331.9) = 0 42 39.94 41 17 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.6 +/- 23.9
  Background counts = 204.9
  Rate = 0.006 +/- 0.001

[Mon Jun 25 10:21:31 2012] Off-axis axis estimate = 3.40'
[Mon Jun 25 10:27:02 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 10:27:02 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Mon Jun 25 10:27:02 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.891
[Mon Jun 25 10:27:02 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 8.13"
[Mon Jun 25 17:37:23 2012] fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_src81.ximg exists
[Mon Jun 25 17:37:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_src81.csv
[Mon Jun 25 17:37:23 2012] fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_src81_1.ximg exists
[Mon Jun 25 17:37:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_src81.csv
[Mon Jun 25 17:37:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 17:37:25 2012] fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Mon Jun 25 17:37:25 2012] fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Mon Jun 25 17:37:25 2012] Fit fullrun_pn_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Tue Jun 26 02:00:23 2012] Spatial fit model total counts = 1550.950000, observed total counts = 1155.000000
[Tue Jun 26 02:00:23 2012] Poor agreement between spatial fit and data for source 87
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 26 02:00:23 2012] Warning, spatial fit 81 centroid is now closest to src. 90
[Tue Jun 26 02:00:23 2012] Source 87 is offset by -1.778219 and -1.567597 pixels which is larger than
2 X fitted extent = 1.129053 x 1.129053, not incorporating fit results
[Tue Jun 26 02:00:23 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 02:00:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 02:00:23 2012] Assessing source extent using major
[Tue Jun 26 02:00:23 2012] Source does appear to be extended
[Tue Jun 26 02:00:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 02:00:23 2012] Source is confused with source 90
[Tue Jun 26 02:01:30 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 02:01:30 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Tue Jun 26 02:01:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.891
[Tue Jun 26 02:01:30 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 8.13"
[Tue Jun 26 05:53:53 2012] fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_src78.ximg exists
[Tue Jun 26 05:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_src78.csv
[Tue Jun 26 05:53:53 2012] fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_src78_1.ximg exists
[Tue Jun 26 05:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_src78.csv
[Tue Jun 26 05:53:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 05:53:55 2012] fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Tue Jun 26 05:53:55 2012] fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Tue Jun 26 05:53:55 2012] Fit fullrun_pn_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src78 appears to have run properly
[Tue Jun 26 11:55:22 2012] Source 87 is offset by 3.447128 and -6.852402 pixels which is larger than
2 X fitted extent = 9.788414 x 1.223554, not incorporating fit results
[Tue Jun 26 11:55:22 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 10.503870 pixels away
[Tue Jun 26 11:55:22 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 11:55:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 11:55:22 2012] Assessing source extent using major
[Tue Jun 26 11:55:22 2012] Source does appear to be extended
[Tue Jun 26 11:55:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 11:56:58 2012] XMMSAS src. selection expression = ellipse(28768.994171, 28829.935059, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 11:56:58 2012] Writing source region out to fullrun_pn_xmm0650560501_pi300-10000_pass1_cl_src87_src.reg
[Tue Jun 26 11:56:58 2012] Extracting stamp from image fullrun_pn_xmm0650560501_pi300-10000_cl_sm2.00.img.gz, (294, 294) - (369, 369)
[Tue Jun 26 11:56:58 2012] XMMSAS bgd. selection expression = annulus(28768.994171, 28829.935059, 1087.500000, 2175.000000, X, Y) && !ellipse(29089.352000, 26640.090000, 280.465608, 280.465608, 0.000000, X, Y) && !ellipse(25960.793579, 30085.636475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27162.264200, 27076.797600, 584.956017, 392.127211, 74.779700, X, Y) && !ellipse(27699.944000, 26836.560000, 778.203222, 778.203222, 0.000000, X, Y) && !ellipse(30771.465057, 26994.465515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30752.088654, 30970.754211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28719.313000, 29836.659600, 423.816812, 423.816812, 0.000000, X, Y) && !ellipse(27663.190399, 28499.999878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25998.194977, 28488.503601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28572.378632, 27790.591980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25963.961029, 27497.628082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30129.956879, 26935.863708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26715.498932, 26575.281525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28177.254517, 26406.100403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27187.451630, 29724.032104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27798.028717, 29553.271240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.398621, 29261.953461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26785.514709, 28823.010742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29083.052277, 28412.306915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30561.444275, 27950.515015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29483.696198, 27208.280334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31315.007965, 25987.277496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30694.292000, 25476.932000, 1281.584037, 1281.584037, 0.000000, X, Y)
[Tue Jun 26 11:56:58 2012] Writing fullrun_pn_xmm0650560501_pi300-10000_pass1_cl_src87.gif
[Tue Jun 26 14:11:14 2012] Mean detx,y = (-134.62, -2454.45) 
[Tue Jun 26 14:11:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 14:11:46 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 14:11:47 2012] Setting source spectrum file to fullrun_pn_xmm0650560501_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Tue Jun 26 14:11:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650560501_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Tue Jun 26 18:00:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 26 18:00:53 2012] rmf not generated due to insufficient counts
[Wed Jun 27 02:45:37 2012] Updating aperture counts using extracted products
[Wed Jun 27 02:45:37 2012] Error reading totcts from fullrun_pn_xmm0650560501_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed Jun 27 02:45:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 02:45:39 2012] Using photon index=1.80, rate=0.00583, arf fullrun_pn_xmm0650560501_pi300-10000_pass1_cl_src87.arf
[Wed Jun 27 02:45:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 02:45:39 2012] Updating source flux to 1.7e-14
[Wed Jun 27 02:55:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting