[Mon Jun 25 10:23:23 2012] Detection parameters:
  Position = (367.2, 442.1) = 0 42 26.01 41 25 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.9 +/- 11.7
  Background counts = 10.4
  Rate = 0.004 +/- 0.0005

[Mon Jun 25 10:23:26 2012] Off-axis axis estimate = 11.55'
[Mon Jun 25 21:44:51 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 21:44:51 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Mon Jun 25 21:44:51 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.732
[Mon Jun 25 21:44:51 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 12.20"
[Tue Jun 26 01:59:56 2012] fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_src76.ximg exists
[Tue Jun 26 01:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_src76.csv
[Tue Jun 26 01:59:56 2012] fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_src76_1.ximg exists
[Tue Jun 26 01:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_src76.csv
[Tue Jun 26 01:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 01:59:58 2012] fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Tue Jun 26 01:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src76.csv
[Tue Jun 26 01:59:58 2012] fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Tue Jun 26 01:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src76.csv
[Tue Jun 26 01:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560501_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 02:00:58 2012] Warning, spatial fit 76 centroid is now closest to src. 63
[Tue Jun 26 02:00:58 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 02:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 02:00:58 2012] Assessing source extent using major
[Tue Jun 26 02:00:58 2012] Source does appear to be extended
[Tue Jun 26 02:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 08:29:06 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 08:29:06 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Tue Jun 26 08:29:06 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.732
[Tue Jun 26 08:29:06 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 12.20"
[Tue Jun 26 11:54:47 2012] fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_src71.ximg exists
[Tue Jun 26 11:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_src71.csv
[Tue Jun 26 11:54:47 2012] fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_src71_1.ximg exists
[Tue Jun 26 11:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_src71.csv
[Tue Jun 26 11:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 11:54:48 2012] fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Tue Jun 26 11:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src71.csv
[Tue Jun 26 11:54:48 2012] fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Tue Jun 26 11:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src71.csv
[Tue Jun 26 11:54:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560501_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 11:56:06 2012] Warning, spatial fit 71 centroid is now closest to src. 63
[Tue Jun 26 11:56:06 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 11:56:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 11:56:06 2012] Assessing source extent using major
[Tue Jun 26 11:56:06 2012] Source does appear to be extended
[Tue Jun 26 11:56:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 23:58:22 2012] XMMSAS src. selection expression = ellipse(31896.135468, 38412.408386, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 23:58:22 2012] Writing source region out to fullrun_mos2_xmm0650560501_pi300-10000_pass1_cl_src42_src.reg
[Tue Jun 26 23:58:22 2012] Extracting stamp from image fullrun_mos2_xmm0650560501_pi300-10000_cl_sm2.00.img.gz, (330, 405) - (405, 480)
[Tue Jun 26 23:58:22 2012] XMMSAS bgd. selection expression = annulus(31896.135468, 38412.408386, 1087.500000, 2175.000000, X, Y) && !ellipse(32270.855682, 36197.644012, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 23:58:22 2012] Writing fullrun_mos2_xmm0650560501_pi300-10000_pass1_cl_src42.gif
[Wed Jun 27 00:26:47 2012] Mean detx,y = (2809.35, 12129.95) 
[Wed Jun 27 00:26:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 00:26:57 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 00:26:57 2012] Setting source spectrum file to fullrun_mos2_xmm0650560501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Jun 27 00:26:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650560501_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed Jun 27 02:43:41 2012] Not generating rmf since there are only 84 counts
[Wed Jun 27 02:43:41 2012] rmf not generated due to insufficient counts
[Wed Jun 27 02:45:43 2012] Updating aperture counts using extracted products
[Wed Jun 27 02:45:43 2012] Error reading totcts from fullrun_mos2_xmm0650560501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Jun 27 02:45:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 02:45:45 2012] Using photon index=1.80, rate=0.0036, arf fullrun_mos2_xmm0650560501_pi300-10000_pass1_cl_src42.arf
[Wed Jun 27 02:45:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 02:45:45 2012] Updating source flux to 8.9e-14
[Wed Jun 27 02:50:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting