[Tue May  7 01:00:18 2013] Detection parameters:
  Position = (394.0, 327.3) = 0 42 15.48 41 17 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.6 +/- 19.1
  Background counts = 44.4
  Rate = 0.01 +/- 0.001

[Tue May  7 01:00:19 2013] Off-axis axis estimate = 7.24'
[Tue May  7 05:51:34 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Tue May  7 05:51:34 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Tue May  7 05:51:34 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.760
[Tue May  7 05:51:34 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 10.05"
[Tue May  7 08:38:08 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_src47.ximg exists
[Tue May  7 08:38:08 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_src47_1.ximg exists
[Tue May  7 08:38:08 2013] Fit fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_src47 appears to have run properly
[Tue May  7 08:38:10 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Tue May  7 08:38:10 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Tue May  7 08:38:10 2013] Fit fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Tue May  7 11:20:12 2013] Spatial fit model total counts = 477.478000, observed total counts = 443.000000
[Tue May  7 11:20:12 2013] Offset between fit and detection position for source 55 = 0.300589 pixels
[Tue May  7 11:20:12 2013] 478.618000 total counts/ 346.414000 bgd. counts: snr = 7.103083
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.300589 pixels
  Position = (393.8, 327.1) = 0 42 15.55 41 17 20.7
  Extent = 5.7 (4.6-7.2)" x 3.6 (2.9-4.6)", rotation angle = 224 (204-250) degrees
  Source counts = 132.2 +/- 21.9
  Background counts = 346.4
  Rate = 0.006 +/- 0.001
[Tue May  7 11:20:12 2013] Vigneting correction estimate = 1.000000
[Tue May  7 11:20:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 11:20:12 2013] Assessing source extent using major axis lower bound
[Tue May  7 11:20:12 2013] Source does appear to be extended
[Tue May  7 11:20:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Tue May  7 14:12:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 14:12:12 2013] Initial guess for spatial extent in simple fitting = 4.64"
[Tue May  7 14:12:12 2013] source mask rpix=1.1, npix_max = 9, mask sum = 8, frac = 0.814
[Tue May  7 14:12:12 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 4.64"
[Tue May  7 16:26:37 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src46.ximg exists
[Tue May  7 16:26:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src46.csv
[Tue May  7 16:26:37 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src46_1.ximg exists
[Tue May  7 16:26:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src46.csv
[Tue May  7 16:26:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 16:26:38 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Tue May  7 16:26:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue May  7 16:26:38 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Tue May  7 16:26:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue May  7 16:26:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 18:32:55 2013] Warning, spatial fit 46 centroid is now closest to src. 54
[Tue May  7 18:32:55 2013] Vigneting correction estimate = 1.000000
[Tue May  7 18:32:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 18:32:55 2013] Assessing source extent using major axis lower bound
[Tue May  7 18:32:55 2013] Source does appear to be extended
[Tue May  7 18:32:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Tue May  7 22:38:19 2013] XMMSAS src. selection expression = ellipse(34210.954160, 28407.969400, 339.102610, 217.999206, 223.738000, X, Y)
[Tue May  7 22:38:19 2013] Writing source region out to fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src55_src.reg
[Tue May  7 22:38:19 2013] Extracting stamp from image fullrun_mos1_xmm0650560401_pi300-10000_cl_sm2.00.img.gz, (374, 308) - (413, 347)
[Tue May  7 22:38:19 2013] XMMSAS bgd. selection expression = annulus(34210.954160, 28407.969400, 565.171016, 1130.342033, X, Y) && !ellipse(34779.576935, 29878.817657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34991.517400, 29151.160400, 359.311210, 275.258408, 60.020000, X, Y) && !ellipse(35619.917603, 28870.902161, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  7 22:38:19 2013] Writing fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src55.gif
[Tue May  7 22:50:25 2013] Mean detx,y = (4492.70, 4983.41) 
[Tue May  7 22:50:26 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 22:50:30 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 22:50:30 2013] Setting source spectrum file to fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Tue May  7 22:50:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Wed May  8 03:25:27 2013] Updating aperture counts using extracted products
[Wed May  8 03:25:27 2013] Total counts from fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 166.00
[Wed May  8 03:25:27 2013] Total counts from fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src55_bgd.pi.gz = 362.00
[Wed May  8 03:25:27 2013] Got source and background scale factors 196184.000000, 1854952.000000
[Wed May  8 03:25:27 2013] User source parameters:
  Position = (393.8, 327.1) = 0 42 15.55 41 17 20.7
  Extent = 5.7 (4.6-7.2)" x 3.6 (2.9-4.6)", rotation angle = 224 (204-250) degrees
  Source aperture counts = 127.7 +/- 13.9
  Background aperture counts = 38.3
  Rate = 0.006 +/- 0.0006

[Wed May  8 03:25:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:25:32 2013] Using photon index=1.80, rate=0.00592, arf fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src55.arf
[Wed May  8 03:25:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 03:25:33 2013] Updating source flux to 1.2e-13
[Wed May  8 03:26:12 2013] xmm0650560401/analysis//spectral/fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete