[Tue May  7 01:00:18 2013] Detection parameters:
  Position = (482.8, 353.9) = 0 41 41.14 41 19 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 14.0
  Background counts = 26.8
  Rate = 0.004 +/- 0.0006

[Tue May  7 01:00:19 2013] Off-axis axis estimate = 13.96'
[Tue May  7 05:51:34 2013] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting
[Tue May  7 05:51:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  7 05:51:34 2013] Initial guess for spatial extent in simple fitting = 13.41"
[Tue May  7 05:51:34 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.954
[Tue May  7 05:51:34 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 13.41"
[Tue May  7 08:38:09 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_src67.ximg exists
[Tue May  7 08:38:09 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_src67_1.ximg exists
[Tue May  7 08:38:09 2013] Fit fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_src67 appears to have run properly
[Tue May  7 08:38:11 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Tue May  7 08:38:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src67.csv
[Tue May  7 08:38:11 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Tue May  7 08:38:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src67.csv
[Tue May  7 08:38:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650560401_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 11:20:12 2013] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 17.663014 pixels away
[Tue May  7 11:20:12 2013] Vigneting correction estimate = 1.000000
[Tue May  7 11:20:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 11:20:12 2013] Assessing source extent using major
[Tue May  7 11:20:12 2013] Source does appear to be extended
[Tue May  7 11:20:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 14:12:12 2013] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting
[Tue May  7 14:12:12 2013] Initial guess for spatial extent in simple fitting = 13.41"
[Tue May  7 14:12:12 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.954
[Tue May  7 14:12:12 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 13.41"
[Tue May  7 16:26:37 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src65.ximg exists
[Tue May  7 16:26:37 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src65_1.ximg exists
[Tue May  7 16:26:37 2013] Fit fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_src65 appears to have run properly
[Tue May  7 16:26:38 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Tue May  7 16:26:38 2013] fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Tue May  7 16:26:38 2013] Fit fullrun_mos1_xmm0650560401_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Tue May  7 18:32:55 2013] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 16.822334 pixels away
[Tue May  7 18:32:55 2013] Vigneting correction estimate = 1.000000
[Tue May  7 18:32:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 18:32:55 2013] Assessing source extent using major
[Tue May  7 18:32:55 2013] Source does appear to be extended
[Tue May  7 18:32:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 22:38:20 2013] XMMSAS src. selection expression = ellipse(41958.996521, 30736.904541, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  7 22:38:20 2013] Writing source region out to fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src48_src.reg
[Tue May  7 22:38:20 2013] Extracting stamp from image fullrun_mos1_xmm0650560401_pi300-10000_cl_sm2.00.img.gz, (445, 316) - (520, 391)
[Tue May  7 22:38:20 2013] XMMSAS bgd. selection expression = annulus(41958.996521, 30736.904541, 1087.500000, 2175.000000, X, Y)
[Tue May  7 22:38:20 2013] Writing fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src48.gif
[Tue May  7 22:53:41 2013] Mean detx,y = (9992.77, 10889.06) 
[Tue May  7 22:53:42 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 22:53:46 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 22:53:46 2013] Setting source spectrum file to fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue May  7 22:53:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Wed May  8 00:39:06 2013] Not generating rmf since there are only 93 counts
[Wed May  8 00:39:06 2013] rmf not generated due to insufficient counts
[Wed May  8 03:25:30 2013] Updating aperture counts using extracted products
[Wed May  8 03:25:30 2013] Total counts from fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 199.00
[Wed May  8 03:25:30 2013] Total counts from fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src48_bgd.pi.gz = 1096.00
[Wed May  8 03:25:30 2013] Got source and background scale factors 1248436.000000, 10973216.000000
[Wed May  8 03:25:30 2013] User source parameters:
  Position = (482.8, 353.9) = 0 41 41.14 41 19 16.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74.3 +/- 15.1
  Background aperture counts = 124.7
  Rate = 0.003 +/- 0.0007

[Wed May  8 03:25:30 2013] Updating counts from extracted products
[Wed May  8 03:25:30 2013] Set source signif. to 74.31/11.17 = 6.65
[Wed May  8 03:25:33 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:25:33 2013] Using photon index=1.80, rate=0.00332, arf fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src48.arf
[Wed May  8 03:25:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 03:25:33 2013] Updating source flux to 8.3e-14
[Wed May  8 03:25:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 03:26:12 2013] xmm0650560401/analysis//spectral/fullrun_mos1_xmm0650560401_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete