[Tue May 7 08:29:25 2013] Detection parameters: Position = (333.1, 322.2) = 0 42 38.45 41 16 51.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 446.4 +/- 40.0 Background counts = 198.1 Rate = 0.02 +/- 0.002 [Tue May 7 08:29:26 2013] Off-axis axis estimate = 3.05' [Tue May 7 08:30:27 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:30:27 2013] Initial guess for spatial extent in simple fitting = 7.95" [Tue May 7 08:30:27 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.646 [Tue May 7 08:30:27 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 7.95" [Tue May 7 08:30:31 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src81.ximg exists [Tue May 7 08:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src81.csv [Tue May 7 08:30:31 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src81_1.ximg exists [Tue May 7 08:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src81.csv [Tue May 7 08:30:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src81_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:30:33 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src81.ximg exists [Tue May 7 08:30:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src81.csv [Tue May 7 08:30:33 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists [Tue May 7 08:30:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src81.csv [Tue May 7 08:30:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src81_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:31:04 2013] Spatial fit model total counts = 6135.250000, observed total counts = 5236.000000 [Tue May 7 08:31:04 2013] Poor agreement between spatial fit and data for source 86 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 08:31:04 2013] Source 86 is offset by 0.241272 and 8.609454 pixels which is larger than 2 X fitted extent = 1.797963 x 1.797963, not incorporating fit results [Tue May 7 08:31:05 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:31:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:31:05 2013] Assessing source extent using major [Tue May 7 08:31:05 2013] Source does appear to be extended [Tue May 7 08:31:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:31:05 2013] Source is confused with source 90 [Tue May 7 08:32:04 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:32:04 2013] Initial guess for spatial extent in simple fitting = 7.95" [Tue May 7 08:32:04 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.646 [Tue May 7 08:32:04 2013] Giving source the simple spatial ID 74 for pass 1, mean size = 7.95" [Tue May 7 08:32:06 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src74.ximg exists [Tue May 7 08:32:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src74.csv [Tue May 7 08:32:06 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src74_1.ximg exists [Tue May 7 08:32:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src74.csv [Tue May 7 08:32:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src74_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:08 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src74.ximg exists [Tue May 7 08:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src74.csv [Tue May 7 08:32:08 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists [Tue May 7 08:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src74.csv [Tue May 7 08:32:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src74_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:38 2013] Source 86 is offset by 5.951019 and -7.924201 pixels which is larger than 2 X fitted extent = 7.090621 x 7.090621, not incorporating fit results [Tue May 7 08:32:38 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:32:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:32:38 2013] Assessing source extent using major [Tue May 7 08:32:38 2013] Source does appear to be extended [Tue May 7 08:32:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:33:38 2013] XMMSAS src. selection expression = ellipse(28934.370636, 27979.980530, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 08:33:38 2013] Not overwriting source region fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src86_src.reg [Tue May 7 08:33:38 2013] Extracting stamp from image fullrun_pn_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (296, 285) - (371, 360) [Tue May 7 08:33:38 2013] XMMSAS bgd. selection expression = annulus(28934.370636, 27979.980530, 1087.500000, 2175.000000, X, Y) && !ellipse(32440.719147, 26609.738495, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28913.033680, 27033.576400, 1331.383238, 1279.113637, 345.508600, X, Y) && !ellipse(27560.074000, 27181.630000, 635.942418, 635.942418, 0.000000, X, Y) && !ellipse(26694.553200, 26216.675200, 507.710415, 507.710415, 0.000000, X, Y) && !ellipse(27245.704000, 27382.742200, 3815.664110, 3815.664110, 0.000000, X, Y) && !ellipse(31744.968719, 30855.584351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30606.293030, 27438.999725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.497253, 27011.383362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28005.078522, 26761.446869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.766000, 25530.792000, 532.309615, 532.309615, 0.000000, X, Y) && !ellipse(27128.428000, 29746.456000, 1326.144038, 1326.144038, 0.000000, X, Y) && !ellipse(27810.167511, 29956.984375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28535.829400, 30257.646200, 392.532811, 392.532811, 0.000000, X, Y) && !ellipse(29369.290985, 29337.783752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26523.704926, 29677.794769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.046631, 28951.970825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.330109, 28595.493317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.912000, 27788.350000, 1224.304035, 1224.304035, 0.162000, X, Y) && !ellipse(31422.504791, 27680.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.518000, 27462.792000, 1097.240032, 1097.240032, 0.000000, X, Y) && !ellipse(29436.784485, 27808.186859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29968.862976, 27500.296387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31539.740265, 27047.905945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.000214, 26113.330322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.358643, 25530.726624, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 08:33:38 2013] Writing fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src86.gif [Tue May 7 09:48:17 2013] Mean detx,y = (1138.38, -1414.74) [Tue May 7 09:48:20 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 09:48:33 2013] Binned source spectrum to 10 counts/bin [Tue May 7 09:48:34 2013] Setting source spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src86_src_b10.pi.gz [Tue May 7 09:48:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src86_bgd.pi.gz [Wed May 8 01:44:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 01:44:11 2013] rmf not generated due to insufficient counts [Wed May 8 03:25:49 2013] Updating aperture counts using extracted products [Wed May 8 03:25:49 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 3312.00 [Wed May 8 03:25:49 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src86_bgd.pi.gz = 93.00 [Wed May 8 03:25:49 2013] Got source and background scale factors 908599.000000, 112000.000000 [Wed May 8 03:25:49 2013] User source parameters: Position = (333.1, 322.2) = 0 42 38.45 41 16 51.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 2557.5 +/- 58.6 Background aperture counts = 754.5 Rate = 0.09 +/- 0.002 [Wed May 8 03:25:49 2013] Updating counts from extracted products [Wed May 8 03:25:49 2013] Set source signif. to 2557.54/27.47 = 93.11 [Wed May 8 03:25:57 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 03:25:57 2013] Using photon index=1.80, rate=0.0924, arf fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src86.arf [Wed May 8 03:25:57 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 03:25:57 2013] Updating source flux to 3.3e-13 [Wed May 8 03:27:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 03:27:55 2013] xmm0650560301/analysis//spectral/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete