[Tue May 7 08:29:24 2013] Detection parameters: Position = (320.2, 344.9) = 0 42 43.43 41 18 30.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 122.6 +/- 23.3 Background counts = 169.7 Rate = 0.005 +/- 0.001 [Tue May 7 08:29:26 2013] Off-axis axis estimate = 3.72' [Tue May 7 08:30:27 2013] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:30:27 2013] Initial guess for spatial extent in simple fitting = 8.29" [Tue May 7 08:30:27 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.080 [Tue May 7 08:30:27 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 8.29" [Tue May 7 08:30:30 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src61.ximg exists [Tue May 7 08:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src61.csv [Tue May 7 08:30:30 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src61_1.ximg exists [Tue May 7 08:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src61.csv [Tue May 7 08:30:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src61_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:30:32 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists [Tue May 7 08:30:32 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists [Tue May 7 08:30:32 2013] Fit fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly [Tue May 7 08:31:04 2013] Warning, spatial fit 61 centroid is now closest to src. 65 [Tue May 7 08:31:04 2013] Source 66 is offset by 7.440339 and -5.883605 pixels which is larger than 2 X fitted extent = 0.971779 x 0.971779, not incorporating fit results [Tue May 7 08:31:05 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:31:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:31:05 2013] Assessing source extent using major [Tue May 7 08:31:05 2013] Source does appear to be extended [Tue May 7 08:31:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:31:05 2013] Source is confused with source 65 [Tue May 7 08:32:04 2013] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:32:04 2013] Initial guess for spatial extent in simple fitting = 8.29" [Tue May 7 08:32:04 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.080 [Tue May 7 08:32:04 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 8.29" [Tue May 7 08:32:05 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src57.ximg exists [Tue May 7 08:32:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src57.csv [Tue May 7 08:32:05 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src57_1.ximg exists [Tue May 7 08:32:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src57.csv [Tue May 7 08:32:05 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src57_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:08 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src57.ximg exists [Tue May 7 08:32:08 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists [Tue May 7 08:32:08 2013] Fit fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly [Tue May 7 08:32:38 2013] Source 66 is offset by -7.406948 and -3.624547 pixels which is larger than 2 X fitted extent = 2.373793 x 2.373793, not incorporating fit results [Tue May 7 08:32:38 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:32:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:32:38 2013] Assessing source extent using major [Tue May 7 08:32:38 2013] Source does appear to be extended [Tue May 7 08:32:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:33:37 2013] XMMSAS src. selection expression = ellipse(27810.167511, 29956.984375, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 08:33:37 2013] Not overwriting source region fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src66_src.reg [Tue May 7 08:33:37 2013] Extracting stamp from image fullrun_pn_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (283, 307) - (358, 382) [Tue May 7 08:33:37 2013] XMMSAS bgd. selection expression = annulus(27810.167511, 29956.984375, 1087.500000, 2175.000000, X, Y) && !ellipse(32440.719147, 26609.738495, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28913.033680, 27033.576400, 1331.383238, 1279.113637, 345.508600, X, Y) && !ellipse(27560.074000, 27181.630000, 635.942418, 635.942418, 0.000000, X, Y) && !ellipse(27245.704000, 27382.742200, 3815.664110, 3815.664110, 0.000000, X, Y) && !ellipse(30576.631042, 31341.906067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30606.293030, 27438.999725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.497253, 27011.383362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29687.966187, 31894.784058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27128.428000, 29746.456000, 1326.144038, 1326.144038, 0.000000, X, Y) && !ellipse(28535.829400, 30257.646200, 392.532811, 392.532811, 0.000000, X, Y) && !ellipse(25172.414490, 30091.681976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29369.290985, 29337.783752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26523.704926, 29677.794769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.046631, 28951.970825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.917847, 28475.947968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.735168, 28643.326324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.330109, 28595.493317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.912000, 27788.350000, 1224.304035, 1224.304035, 0.162000, X, Y) && !ellipse(28934.370636, 27979.980530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.518000, 27462.792000, 1097.240032, 1097.240032, 0.000000, X, Y) && !ellipse(29436.784485, 27808.186859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.416656, 27896.641815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29968.862976, 27500.296387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.760498, 27276.389801, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 08:33:37 2013] Writing fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src66.gif [Tue May 7 09:29:02 2013] Mean detx,y = (-650.36, -2959.82) [Tue May 7 09:29:04 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 09:29:17 2013] Binned source spectrum to 10 counts/bin [Tue May 7 09:29:18 2013] Setting source spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src66_src_b10.pi.gz [Tue May 7 09:29:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src66_bgd.pi.gz [Tue May 7 23:53:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue May 7 23:53:10 2013] rmf not generated due to insufficient counts [Wed May 8 03:25:45 2013] Updating aperture counts using extracted products [Wed May 8 03:25:45 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src66_src_b10.pi.gz = 1655.00 [Wed May 8 03:25:45 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src66_bgd.pi.gz = 1366.00 [Wed May 8 03:25:45 2013] Got source and background scale factors 1344000.000000, 2445493.000000 [Wed May 8 03:25:45 2013] User source parameters: Position = (320.2, 344.9) = 0 42 43.43 41 18 30.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 904.3 +/- 41.7 Background aperture counts = 750.7 Rate = 0.03 +/- 0.002 [Wed May 8 03:25:45 2013] Updating counts from extracted products [Wed May 8 03:25:45 2013] Set source signif. to 904.27/27.40 = 33.00 [Wed May 8 03:25:57 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 03:25:57 2013] Using photon index=1.80, rate=0.0327, arf fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src66.arf [Wed May 8 03:25:57 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 03:25:57 2013] Updating source flux to 1.3e-13 [Wed May 8 03:27:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 03:27:55 2013] xmm0650560301/analysis//spectral/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src66_pl.csv not found, spectral fit skipped or did not complete