[Tue May  7 08:29:23 2013] Detection parameters:
  Position = (385.4, 260.8) = 0 42 18.32 41 12 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3881.9 +/- 75.5
  Background counts = 121.5
  Rate = 0.2 +/- 0.004

[Tue May  7 08:29:26 2013] Off-axis axis estimate = 6.87'
[Tue May  7 08:30:27 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:30:27 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Tue May  7 08:30:27 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979
[Tue May  7 08:30:27 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.86"
[Tue May  7 08:30:30 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src33.ximg exists
[Tue May  7 08:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src33.csv
[Tue May  7 08:30:30 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue May  7 08:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src33.csv
[Tue May  7 08:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:30:32 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue May  7 08:30:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue May  7 08:30:32 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue May  7 08:30:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue May  7 08:30:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:31:04 2013] Warning, spatial fit 33 centroid is now closest to src. 112
[Tue May  7 08:31:05 2013] Vigneting correction estimate = 1.000000
[Tue May  7 08:31:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 08:31:05 2013] Assessing source extent using major
[Tue May  7 08:31:05 2013] Source does appear to be extended
[Tue May  7 08:31:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 08:32:04 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:32:04 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Tue May  7 08:32:04 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979
[Tue May  7 08:32:04 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 9.86"
[Tue May  7 08:32:05 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src33.ximg exists
[Tue May  7 08:32:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src33.csv
[Tue May  7 08:32:05 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue May  7 08:32:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src33.csv
[Tue May  7 08:32:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:32:07 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue May  7 08:32:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Tue May  7 08:32:07 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue May  7 08:32:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Tue May  7 08:32:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:32:38 2013] Warning, spatial fit 33 centroid is now closest to src. 34
[Tue May  7 08:32:38 2013] Vigneting correction estimate = 1.000000
[Tue May  7 08:32:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 08:32:38 2013] Assessing source extent using major
[Tue May  7 08:32:38 2013] Source does appear to be extended
[Tue May  7 08:32:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 08:33:36 2013] Counts = 3881.922607, rescaling region sizes by 2.000000
[Tue May  7 08:33:36 2013] XMMSAS src. selection expression = ellipse(33481.440186, 22643.735382, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May  7 08:33:36 2013] Not overwriting source region fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src35_src.reg
[Tue May  7 08:33:36 2013] Extracting stamp from image fullrun_pn_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (310, 186) - (460, 336)
[Tue May  7 08:33:36 2013] XMMSAS bgd. selection expression = annulus(33481.440186, 22643.735382, 4350.000000, 8700.000000, X, Y) && !ellipse(32440.719147, 26609.738495, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28913.033680, 27033.576400, 1331.383238, 1279.113637, 345.508600, X, Y) && !ellipse(27560.074000, 27181.630000, 635.942418, 635.942418, 0.000000, X, Y) && !ellipse(26694.553200, 26216.675200, 507.710415, 507.710415, 0.000000, X, Y) && !ellipse(27245.704000, 27382.742200, 3815.664110, 3815.664110, 0.000000, X, Y) && !ellipse(31096.507019, 13278.351852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30576.631042, 31341.906067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31744.968719, 30855.584351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.700000, 31164.742000, 572.333616, 572.333616, 0.000000, X, Y) && !ellipse(34640.895400, 30093.721800, 455.498413, 455.498413, 0.000000, X, Y) && !ellipse(35875.516000, 29678.426000, 424.916012, 424.916012, 0.000000, X, Y) && !ellipse(30606.293030, 27438.999725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.497253, 27011.383362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25771.754800, 26562.098600, 411.738412, 411.738412, 0.000000, X, Y) && !ellipse(28005.078522, 26761.446869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.766000, 25530.792000, 532.309615, 532.309615, 0.000000, X, Y) && !ellipse(33414.452200, 24602.299400, 402.957612, 402.957612, 0.000000, X, Y) && !ellipse(32558.500400, 24043.483940, 370.272811, 341.436010, 51.815670, X, Y) && !ellipse(30375.090424, 23628.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.424805, 22565.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34228.345062, 22818.253113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.376400, 21719.623200, 447.464013, 403.876012, 14.214892, X, Y) && !ellipse(24547.375458, 21069.912338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31261.129456, 19772.807068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29687.966187, 31894.784058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41837.483795, 30932.038574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27128.428000, 29746.456000, 1326.144038, 1326.144038, 0.000000, X, Y) && !ellipse(27810.167511, 29956.984375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28535.829400, 30257.646200, 392.532811, 392.532811, 0.000000, X, Y) && !ellipse(25172.414490, 30091.681976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29369.290985, 29337.783752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26523.704926, 29677.794769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34190.367523, 29373.385040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34878.659973, 29349.986267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.046631, 28951.970825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35303.260000, 28802.318000, 1668.104048, 1668.104048, 0.000000, X, Y) && !ellipse(32095.453827, 28740.829620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.917847, 28475.947968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.735168, 28643.326324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.330109, 28595.493317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34080.488400, 28580.941200, 384.581611, 384.581611, 0.000000, X, Y) && !ellipse(27792.912000, 27788.350000, 1224.304035, 1224.304035, 0.162000, X, Y) && !ellipse(28934.370636, 27979.980530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.806000, 28290.166000, 1699.664049, 1699.664049, 0.000000, X, Y) && !ellipse(31422.504791, 27680.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.518000, 27462.792000, 1097.240032, 1097.240032, 0.000000, X, Y) && !ellipse(29436.784485, 27808.186859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.416656, 27896.641815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29968.862976, 27500.296387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.760498, 27276.389801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31539.740265, 27047.905945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.000214, 26113.330322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24471.975281, 26344.652405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35301.667206, 25964.712402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.358643, 25530.726624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39522.356659, 25360.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.037079, 25359.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.274323, 24930.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.754700, 24723.770294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31026.297424, 24312.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31924.002655, 24146.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.171936, 24844.919281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.981628, 24496.621918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39815.055054, 24070.157837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29349.718109, 24386.823181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.270800, 23912.358600, 380.446411, 380.446411, 0.000000, X, Y) && !ellipse(34978.117371, 20752.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35907.828979, 20314.934845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.842896, 17606.871338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.283142, 16931.734558, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  7 08:33:36 2013] Writing fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src35.gif
[Tue May  7 09:06:34 2013] Mean detx,y = (7204.29, 1838.80) 
[Tue May  7 09:06:39 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 09:08:14 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 09:08:15 2013] Setting source spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue May  7 09:08:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue May  7 23:30:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  7 23:30:38 2013] rmf not generated due to insufficient counts
[Wed May  8 03:25:39 2013] Updating aperture counts using extracted products
[Wed May  8 03:25:39 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 6718.00
[Wed May  8 03:25:40 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 35443.00
[Wed May  8 03:25:40 2013] Got source and background scale factors 4719828.000000, 98736153.000000
[Wed May  8 03:25:40 2013] User source parameters:
  Position = (385.4, 260.8) = 0 42 18.32 41 12 23.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5023.7 +/- 83.0
  Background aperture counts = 1694.3
  Rate = 0.2 +/- 0.003

[Wed May  8 03:25:40 2013] Updating counts from extracted products
[Wed May  8 03:25:40 2013] Set source signif. to 5023.74/41.16 = 122.05
[Wed May  8 03:25:57 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:25:57 2013] Using photon index=1.80, rate=0.182, arf fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src35.arf
[Wed May  8 03:25:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 03:25:57 2013] Updating source flux to 7.3e-13
[Wed May  8 03:27:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 03:27:55 2013] xmm0650560301/analysis//spectral/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete