[Tue May 7 08:29:21 2013] Detection parameters: Position = (318.0, 313.0) = 0 42 44.31 41 16 10.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 13397.6 +/- 145.2 Background counts = 227.1 Rate = 0.5 +/- 0.005 [Tue May 7 08:29:26 2013] Off-axis axis estimate = 1.76' [Tue May 7 08:30:27 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:30:27 2013] Initial guess for spatial extent in simple fitting = 7.31" [Tue May 7 08:30:27 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841 [Tue May 7 08:30:27 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.31" [Tue May 7 08:30:28 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src3.ximg exists [Tue May 7 08:30:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src3.csv [Tue May 7 08:30:28 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src3_1.ximg exists [Tue May 7 08:30:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src3.csv [Tue May 7 08:30:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:30:31 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Tue May 7 08:30:31 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Tue May 7 08:30:31 2013] Fit fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Tue May 7 08:31:04 2013] Warning, spatial fit 3 centroid is now closest to src. 6 [Tue May 7 08:31:04 2013] Spatial fit model total counts = 28508.500000, observed total counts = 28481.000000 [Tue May 7 08:31:04 2013] Offset between fit and detection position for source 3 = 0.614346 pixels [Tue May 7 08:31:04 2013] Warning, changing simple spatial fit ID from 3 to 23 [Tue May 7 08:31:04 2013] 27490.110000 total counts/ 20785.000000 bgd. counts: snr = 46.508346 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.614346 pixels Position = (317.3, 313.0) = 0 42 44.55 41 16 11.3 Extent = 7.9 (7.8-8.4)", rotation angle = 0 Source counts = 6705.1 +/- 165.8 Background counts = 20785.0 Rate = 0.2 +/- 0.006 [Tue May 7 08:31:04 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:31:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:31:04 2013] Assessing source extent using major axis lower bound [Tue May 7 08:31:04 2013] Source does appear to be extended [Tue May 7 08:31:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:31:05 2013] Source is confused with source 6 [Tue May 7 08:31:05 2013] Source is confused with source 23 [Tue May 7 08:31:05 2013] Source is confused with source 85 [Tue May 7 08:32:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 7 08:32:04 2013] Initial guess for spatial extent in simple fitting = 7.95" [Tue May 7 08:32:04 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923 [Tue May 7 08:32:04 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.95" [Tue May 7 08:32:04 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src3.ximg exists [Tue May 7 08:32:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src3.csv [Tue May 7 08:32:04 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src3_1.ximg exists [Tue May 7 08:32:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src3.csv [Tue May 7 08:32:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:07 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Tue May 7 08:32:07 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Tue May 7 08:32:07 2013] Fit fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Tue May 7 08:32:38 2013] Warning, spatial fit 3 centroid is now closest to src. 6 [Tue May 7 08:32:38 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:32:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:32:38 2013] Assessing source extent using major axis lower bound [Tue May 7 08:32:38 2013] Source does appear to be extended [Tue May 7 08:32:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:33:34 2013] Counts = 6705.110000, rescaling region sizes by 2.000000 [Tue May 7 08:33:34 2013] XMMSAS src. selection expression = ellipse(27560.074000, 27181.630000, 953.913627, 953.913627, 0.000000, X, Y) [Tue May 7 08:33:34 2013] Not overwriting source region fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_src.reg [Tue May 7 08:33:34 2013] Extracting stamp from image fullrun_pn_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (263, 258) - (372, 368) [Tue May 7 08:33:34 2013] XMMSAS bgd. selection expression = annulus(27560.074000, 27181.630000, 3179.712091, 6359.424183, X, Y) && !ellipse(32440.719147, 26609.738495, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28913.033680, 27033.576400, 1331.383238, 1279.113637, 345.508600, X, Y) && !ellipse(26694.553200, 26216.675200, 507.710415, 507.710415, 0.000000, X, Y) && !ellipse(21686.363400, 25589.215400, 450.752813, 450.752813, 0.000000, X, Y) && !ellipse(27245.704000, 27382.742200, 3815.664110, 3815.664110, 0.000000, X, Y) && !ellipse(30576.631042, 31341.906067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31744.968719, 30855.584351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.700000, 31164.742000, 572.333616, 572.333616, 0.000000, X, Y) && !ellipse(23230.926971, 29309.539551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30606.293030, 27438.999725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.497253, 27011.383362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24117.145000, 27079.190620, 368.310411, 368.310411, 0.000000, X, Y) && !ellipse(25771.754800, 26562.098600, 411.738412, 411.738412, 0.000000, X, Y) && !ellipse(28005.078522, 26761.446869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.818481, 26203.678314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.766000, 25530.792000, 532.309615, 532.309615, 0.000000, X, Y) && !ellipse(33414.452200, 24602.299400, 402.957612, 402.957612, 0.000000, X, Y) && !ellipse(32558.500400, 24043.483940, 370.272811, 341.436010, 51.815670, X, Y) && !ellipse(30375.090424, 23628.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.424805, 22565.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34228.345062, 22818.253113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33481.440186, 22643.735382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.376400, 21719.623200, 447.464013, 403.876012, 14.214892, X, Y) && !ellipse(24547.375458, 21069.912338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23333.373932, 33360.607147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28218.739440, 33051.131600, 418.175212, 418.175212, 0.000000, X, Y) && !ellipse(34094.837000, 32392.409600, 428.811212, 428.811212, 0.000000, X, Y) && !ellipse(22395.824677, 32145.833008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29687.966187, 31894.784058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24766.118980, 31846.856200, 391.571211, 391.571211, 0.000000, X, Y) && !ellipse(27128.428000, 29746.456000, 1326.144038, 1326.144038, 0.000000, X, Y) && !ellipse(27810.167511, 29956.984375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28535.829400, 30257.646200, 392.532811, 392.532811, 0.000000, X, Y) && !ellipse(25172.414490, 30091.681976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29369.290985, 29337.783752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26523.704926, 29677.794769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34190.367523, 29373.385040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.046631, 28951.970825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35303.260000, 28802.318000, 1668.104048, 1668.104048, 0.000000, X, Y) && !ellipse(32095.453827, 28740.829620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.917847, 28475.947968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.735168, 28643.326324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.330109, 28595.493317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34080.488400, 28580.941200, 384.581611, 384.581611, 0.000000, X, Y) && !ellipse(27792.912000, 27788.350000, 1224.304035, 1224.304035, 0.162000, X, Y) && !ellipse(28934.370636, 27979.980530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.806000, 28290.166000, 1699.664049, 1699.664049, 0.000000, X, Y) && !ellipse(31422.504791, 27680.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.518000, 27462.792000, 1097.240032, 1097.240032, 0.000000, X, Y) && !ellipse(29436.784485, 27808.186859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.416656, 27896.641815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29968.862976, 27500.296387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.760498, 27276.389801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31539.740265, 27047.905945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23154.045288, 27021.114044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.000214, 26113.330322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24471.975281, 26344.652405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.358643, 25530.726624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.037079, 25359.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.274323, 24930.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.754700, 24723.770294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31026.297424, 24312.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23884.085419, 24424.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31924.002655, 24146.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.171936, 24844.919281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.981628, 24496.621918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29349.718109, 24386.823181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.270800, 23912.358600, 380.446411, 380.446411, 0.000000, X, Y) && !ellipse(22117.334671, 23051.404510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23358.795837, 20072.135071, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 08:33:34 2013] Writing fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3.gif [Tue May 7 08:33:41 2013] ../../xmm0650560301/products/events/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0650560301/products/events/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create [Tue May 7 08:33:41 2013] Mean detx,y = (-45.92, -260.81) [Tue May 7 08:33:41 2013] ../../xmm0650560301/products/images/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_src.img and ../../xmm0650560301/products/images/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create [Tue May 7 08:33:41 2013] ../../xmm0650560301/products/spectra/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0650560301/products/spectra/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create [Tue May 7 08:33:41 2013] Setting source spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Tue May 7 08:33:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_bgd.pi.gz [Tue May 7 08:33:41 2013] ../../xmm0650560301/products/lightcurves/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0650560301/products/lightcurves/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create [Wed May 8 03:25:33 2013] Updating aperture counts using extracted products [Wed May 8 03:25:33 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 42667.00 [Wed May 8 03:25:33 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 25005.00 [Wed May 8 03:25:33 2013] Got source and background scale factors 2649131.000000, 37915702.000000 [Wed May 8 03:25:33 2013] User source parameters: Position = (317.3, 313.0) = 0 42 44.55 41 16 11.3 Extent = 7.9 (7.8-8.4)", rotation angle = 0 Source aperture counts = 40919.9 +/- 207.6 Background aperture counts = 1747.1 Rate = 1 +/- 0.007 [Wed May 8 03:25:56 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 03:25:56 2013] Using photon index=1.80, rate=0.242, arf fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3.arf [Wed May 8 03:25:56 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 03:25:56 2013] Updating source flux to 7.3e-13 [Wed May 8 03:27:31 2013] Flag c found in src. 3 procflags, skipping spectral fitting [Wed May 8 03:27:55 2013] xmm0650560301/analysis//spectral/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete