[Tue May 7 08:29:22 2013] Detection parameters: Position = (322.9, 294.1) = 0 42 42.39 41 14 49.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 3036.9 +/- 74.1 Background counts = 232.8 Rate = 0.1 +/- 0.003 [Tue May 7 08:29:26 2013] Off-axis axis estimate = 1.80' [Tue May 7 08:30:27 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:30:27 2013] Initial guess for spatial extent in simple fitting = 7.33" [Tue May 7 08:30:27 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838 [Tue May 7 08:30:27 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 7.33" [Tue May 7 08:30:29 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src25.ximg exists [Tue May 7 08:30:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src25.csv [Tue May 7 08:30:29 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src25_1.ximg exists [Tue May 7 08:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src25.csv [Tue May 7 08:30:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:30:32 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Tue May 7 08:30:32 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Tue May 7 08:30:32 2013] Fit fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly [Tue May 7 08:31:04 2013] Warning, spatial fit 25 centroid is now closest to src. 23 [Tue May 7 08:31:04 2013] Spatial fit model total counts = 7028.000000, observed total counts = 7017.000000 [Tue May 7 08:31:04 2013] Offset between fit and detection position for source 25 = 0.093007 pixels [Tue May 7 08:31:04 2013] Warning, changing simple spatial fit ID from 25 to 99 [Tue May 7 08:31:04 2013] 7118.550000 total counts/ 5935.620000 bgd. counts: snr = 15.354158 Spatial fit parameters: Offset between fit and detection position for source 25 = 0.093007 pixels Position = (323.0, 294.0) = 0 42 42.37 41 14 48.7 Extent = 6.7 (6.2-7.3)", rotation angle = 0 Source counts = 1182.9 +/- 84.4 Background counts = 5935.6 Rate = 0.04 +/- 0.003 [Tue May 7 08:31:04 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:31:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:31:04 2013] Assessing source extent using major axis lower bound [Tue May 7 08:31:04 2013] Source does appear to be extended [Tue May 7 08:31:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:32:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 7 08:32:04 2013] Initial guess for spatial extent in simple fitting = 6.65" [Tue May 7 08:32:04 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.971 [Tue May 7 08:32:04 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 6.65" [Tue May 7 08:32:05 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src25.ximg exists [Tue May 7 08:32:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src25.csv [Tue May 7 08:32:05 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src25_1.ximg exists [Tue May 7 08:32:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src25.csv [Tue May 7 08:32:05 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:07 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Tue May 7 08:32:07 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Tue May 7 08:32:07 2013] Fit fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly [Tue May 7 08:32:38 2013] Warning, spatial fit 25 centroid is now closest to src. 105 [Tue May 7 08:32:38 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:32:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:32:38 2013] Assessing source extent using major axis lower bound [Tue May 7 08:32:38 2013] Source does appear to be extended [Tue May 7 08:32:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:33:36 2013] Counts = 1182.930000, rescaling region sizes by 2.000000 [Tue May 7 08:33:36 2013] XMMSAS src. selection expression = ellipse(28051.766000, 25530.792000, 798.464423, 798.464423, 0.000000, X, Y) [Tue May 7 08:33:36 2013] Not overwriting source region fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src25_src.reg [Tue May 7 08:33:36 2013] Extracting stamp from image fullrun_pn_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (277, 248) - (369, 340) [Tue May 7 08:33:36 2013] XMMSAS bgd. selection expression = annulus(28051.766000, 25530.792000, 2661.548077, 5323.096153, X, Y) && !ellipse(32440.719147, 26609.738495, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28913.033680, 27033.576400, 1331.383238, 1279.113637, 345.508600, X, Y) && !ellipse(27560.074000, 27181.630000, 635.942418, 635.942418, 0.000000, X, Y) && !ellipse(26694.553200, 26216.675200, 507.710415, 507.710415, 0.000000, X, Y) && !ellipse(27245.704000, 27382.742200, 3815.664110, 3815.664110, 0.000000, X, Y) && !ellipse(30576.631042, 31341.906067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31744.968719, 30855.584351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.700000, 31164.742000, 572.333616, 572.333616, 0.000000, X, Y) && !ellipse(23230.926971, 29309.539551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30606.293030, 27438.999725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.497253, 27011.383362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24117.145000, 27079.190620, 368.310411, 368.310411, 0.000000, X, Y) && !ellipse(25771.754800, 26562.098600, 411.738412, 411.738412, 0.000000, X, Y) && !ellipse(28005.078522, 26761.446869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.818481, 26203.678314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33414.452200, 24602.299400, 402.957612, 402.957612, 0.000000, X, Y) && !ellipse(32558.500400, 24043.483940, 370.272811, 341.436010, 51.815670, X, Y) && !ellipse(30375.090424, 23628.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.424805, 22565.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34228.345062, 22818.253113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33481.440186, 22643.735382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.376400, 21719.623200, 447.464013, 403.876012, 14.214892, X, Y) && !ellipse(24547.375458, 21069.912338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31261.129456, 19772.807068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27128.428000, 29746.456000, 1326.144038, 1326.144038, 0.000000, X, Y) && !ellipse(27810.167511, 29956.984375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28535.829400, 30257.646200, 392.532811, 392.532811, 0.000000, X, Y) && !ellipse(25172.414490, 30091.681976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29369.290985, 29337.783752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26523.704926, 29677.794769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34190.367523, 29373.385040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.046631, 28951.970825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32095.453827, 28740.829620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.917847, 28475.947968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.735168, 28643.326324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.330109, 28595.493317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.912000, 27788.350000, 1224.304035, 1224.304035, 0.162000, X, Y) && !ellipse(28934.370636, 27979.980530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.806000, 28290.166000, 1699.664049, 1699.664049, 0.000000, X, Y) && !ellipse(31422.504791, 27680.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.518000, 27462.792000, 1097.240032, 1097.240032, 0.000000, X, Y) && !ellipse(29436.784485, 27808.186859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.416656, 27896.641815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29968.862976, 27500.296387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.760498, 27276.389801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31539.740265, 27047.905945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23154.045288, 27021.114044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.000214, 26113.330322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24471.975281, 26344.652405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.358643, 25530.726624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.037079, 25359.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.274323, 24930.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.754700, 24723.770294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31026.297424, 24312.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23884.085419, 24424.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31924.002655, 24146.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.171936, 24844.919281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.981628, 24496.621918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29349.718109, 24386.823181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.270800, 23912.358600, 380.446411, 380.446411, 0.000000, X, Y) && !ellipse(22117.334671, 23051.404510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23358.795837, 20072.135071, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 08:33:36 2013] Writing fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src25.gif [Tue May 7 08:51:40 2013] Mean detx,y = (1062.45, 1016.70) [Tue May 7 08:51:44 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 08:52:09 2013] Binned source spectrum to 10 counts/bin [Tue May 7 08:52:09 2013] Setting source spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src25_src_b10.pi.gz [Tue May 7 08:52:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src25_bgd.pi.gz [Wed May 8 03:25:37 2013] Updating aperture counts using extracted products [Wed May 8 03:25:37 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 9274.00 [Wed May 8 03:25:37 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src25_bgd.pi.gz = 13198.00 [Wed May 8 03:25:37 2013] Got source and background scale factors 2003200.000000, 19037328.000000 [Wed May 8 03:25:37 2013] User source parameters: Position = (323.0, 294.0) = 0 42 42.37 41 14 48.7 Extent = 6.7 (6.2-7.3)", rotation angle = 0 Source aperture counts = 7885.2 +/- 97.3 Background aperture counts = 1388.8 Rate = 0.3 +/- 0.004 [Wed May 8 03:25:56 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 03:25:56 2013] Using photon index=1.80, rate=0.0427, arf fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src25.arf [Wed May 8 03:25:56 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 03:25:56 2013] Updating source flux to 1.3e-13 [Wed May 8 03:27:55 2013] xmm0650560301/analysis//spectral/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete