[Tue May 7 08:29:25 2013] Detection parameters: Position = (290.0, 292.0) = 0 42 55.10 41 14 36.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 130.9 +/- 25.7 Background counts = 216.7 Rate = 0.005 +/- 0.001 [Tue May 7 08:29:26 2013] Off-axis axis estimate = 0.77' [Tue May 7 08:30:27 2013] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:30:27 2013] Initial guess for spatial extent in simple fitting = 6.81" [Tue May 7 08:30:27 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937 [Tue May 7 08:30:27 2013] Giving source the simple spatial ID 98 for pass 0, mean size = 6.81" [Tue May 7 08:30:31 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src98.ximg exists [Tue May 7 08:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src98.csv [Tue May 7 08:30:31 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src98_1.ximg exists [Tue May 7 08:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src98.csv [Tue May 7 08:30:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src98_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:30:33 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src98.ximg exists [Tue May 7 08:30:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src98.csv [Tue May 7 08:30:33 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists [Tue May 7 08:30:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src98.csv [Tue May 7 08:30:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src98_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:31:04 2013] Warning, spatial fit 98 centroid is now closest to src. 22 [Tue May 7 08:31:05 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:31:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:31:05 2013] Assessing source extent using major [Tue May 7 08:31:05 2013] Source does appear to be extended [Tue May 7 08:31:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:32:04 2013] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:32:04 2013] Initial guess for spatial extent in simple fitting = 6.81" [Tue May 7 08:32:04 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937 [Tue May 7 08:32:04 2013] Giving source the simple spatial ID 88 for pass 1, mean size = 6.81" [Tue May 7 08:32:06 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src88.ximg exists [Tue May 7 08:32:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src88.csv [Tue May 7 08:32:06 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src88_1.ximg exists [Tue May 7 08:32:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src88.csv [Tue May 7 08:32:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src88_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:08 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src88.ximg exists [Tue May 7 08:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src88.csv [Tue May 7 08:32:08 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists [Tue May 7 08:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src88.csv [Tue May 7 08:32:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src88_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:38 2013] Source 104 is offset by 0.465327 and 0.950639 pixels which is larger than 2 X fitted extent = 4.790253 x 0.783085, not incorporating fit results [Tue May 7 08:32:38 2013] Source 104 is offset by 8.360265 and 3.418676 pixels which is larger than 2 X fitted extent = 6.622943 x 6.622943, not incorporating fit results [Tue May 7 08:32:38 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:32:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:32:38 2013] Assessing source extent using major [Tue May 7 08:32:38 2013] Source does appear to be extended [Tue May 7 08:32:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:33:39 2013] XMMSAS src. selection expression = ellipse(25180.037079, 25359.118805, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 08:33:39 2013] Not overwriting source region fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src104_src.reg [Tue May 7 08:33:39 2013] Extracting stamp from image fullrun_pn_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (252, 255) - (327, 330) [Tue May 7 08:33:39 2013] XMMSAS bgd. selection expression = annulus(25180.037079, 25359.118805, 1087.500000, 2175.000000, X, Y) && !ellipse(27560.074000, 27181.630000, 635.942418, 635.942418, 0.000000, X, Y) && !ellipse(26694.553200, 26216.675200, 507.710415, 507.710415, 0.000000, X, Y) && !ellipse(27245.704000, 27382.742200, 3815.664110, 3815.664110, 0.000000, X, Y) && !ellipse(26528.497253, 27011.383362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24117.145000, 27079.190620, 368.310411, 368.310411, 0.000000, X, Y) && !ellipse(25771.754800, 26562.098600, 411.738412, 411.738412, 0.000000, X, Y) && !ellipse(28005.078522, 26761.446869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.818481, 26203.678314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.912000, 27788.350000, 1224.304035, 1224.304035, 0.162000, X, Y) && !ellipse(25930.518000, 27462.792000, 1097.240032, 1097.240032, 0.000000, X, Y) && !ellipse(25135.416656, 27896.641815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.760498, 27276.389801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23154.045288, 27021.114044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24471.975281, 26344.652405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.274323, 24930.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23884.085419, 24424.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.171936, 24844.919281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.981628, 24496.621918, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 08:33:39 2013] Writing fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src104.gif [Tue May 7 10:01:59 2013] Mean detx,y = (-1494.52, 2208.33) [Tue May 7 10:02:01 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 10:02:12 2013] Binned source spectrum to 10 counts/bin [Tue May 7 10:02:12 2013] Setting source spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src104_src_b10.pi.gz [Tue May 7 10:02:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src104_bgd.pi.gz [Wed May 8 03:08:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 03:08:12 2013] rmf not generated due to insufficient counts [Wed May 8 03:25:52 2013] Updating aperture counts using extracted products [Wed May 8 03:25:52 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src104_src_b10.pi.gz = 1813.00 [Wed May 8 03:25:52 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src104_bgd.pi.gz = 1375.00 [Wed May 8 03:25:52 2013] Got source and background scale factors 1259316.000000, 1648000.000000 [Wed May 8 03:25:52 2013] User source parameters: Position = (290.0, 292.0) = 0 42 55.10 41 14 36.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 762.3 +/- 43.6 Background aperture counts = 1050.7 Rate = 0.03 +/- 0.002 [Wed May 8 03:25:52 2013] Updating counts from extracted products [Wed May 8 03:25:52 2013] Set source signif. to 762.30/32.41 = 23.52 [Wed May 8 03:25:58 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 03:25:58 2013] Using photon index=1.80, rate=0.0275, arf fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src104.arf [Wed May 8 03:25:58 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 03:25:58 2013] Updating source flux to 1.1e-13 [Wed May 8 03:27:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 03:27:55 2013] xmm0650560301/analysis//spectral/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src104_pl.csv not found, spectral fit skipped or did not complete