[Tue May 7 08:29:25 2013] Detection parameters: Position = (358.4, 294.0) = 0 42 28.72 41 14 47.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 191.4 +/- 26.7 Background counts = 178.1 Rate = 0.008 +/- 0.001 [Tue May 7 08:29:26 2013] Off-axis axis estimate = 4.36' [Tue May 7 08:30:27 2013] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:30:27 2013] Initial guess for spatial extent in simple fitting = 8.61" [Tue May 7 08:30:27 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.773 [Tue May 7 08:30:27 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 8.61" [Tue May 7 08:30:31 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src95.ximg exists [Tue May 7 08:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src95.csv [Tue May 7 08:30:31 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src95_1.ximg exists [Tue May 7 08:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src95.csv [Tue May 7 08:30:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src95_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:30:33 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src95.ximg exists [Tue May 7 08:30:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src95.csv [Tue May 7 08:30:33 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists [Tue May 7 08:30:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src95.csv [Tue May 7 08:30:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src95_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:31:04 2013] Spatial fit model total counts = 3259.710000, observed total counts = 2121.000000 [Tue May 7 08:31:04 2013] Poor agreement between spatial fit and data for source 101 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 08:31:04 2013] Warning, spatial fit 95 centroid is now closest to src. 97 [Tue May 7 08:31:05 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:31:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:31:05 2013] Assessing source extent using major [Tue May 7 08:31:05 2013] Source does appear to be extended [Tue May 7 08:31:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:31:05 2013] Source is confused with source 97 [Tue May 7 08:32:04 2013] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:32:04 2013] Initial guess for spatial extent in simple fitting = 8.61" [Tue May 7 08:32:04 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.773 [Tue May 7 08:32:04 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 8.61" [Tue May 7 08:32:06 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src86.ximg exists [Tue May 7 08:32:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src86.csv [Tue May 7 08:32:06 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src86_1.ximg exists [Tue May 7 08:32:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src86.csv [Tue May 7 08:32:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src86_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:08 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src86.ximg exists [Tue May 7 08:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src86.csv [Tue May 7 08:32:08 2013] fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists [Tue May 7 08:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src86.csv [Tue May 7 08:32:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src86_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:38 2013] Spatial fit model total counts = 3057.300000, observed total counts = 2121.000000 [Tue May 7 08:32:38 2013] Poor agreement between spatial fit and data for source 101 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 08:32:38 2013] Source 101 is offset by 1.235499 and -0.537512 pixels which is larger than 2 X fitted extent = 0.989347 x 0.989347, not incorporating fit results [Tue May 7 08:32:38 2013] Warning: source 92 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 101 at 10.619183 pixels away [Tue May 7 08:32:38 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:32:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:32:38 2013] Assessing source extent using major [Tue May 7 08:32:38 2013] Source does appear to be extended [Tue May 7 08:32:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:33:39 2013] XMMSAS src. selection expression = ellipse(31130.358643, 25530.726624, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 08:33:39 2013] Not overwriting source region fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src101_src.reg [Tue May 7 08:33:39 2013] Extracting stamp from image fullrun_pn_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (321, 257) - (396, 332) [Tue May 7 08:33:39 2013] XMMSAS bgd. selection expression = annulus(31130.358643, 25530.726624, 1087.500000, 2175.000000, X, Y) && !ellipse(32440.719147, 26609.738495, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28913.033680, 27033.576400, 1331.383238, 1279.113637, 345.508600, X, Y) && !ellipse(27245.704000, 27382.742200, 3815.664110, 3815.664110, 0.000000, X, Y) && !ellipse(30606.293030, 27438.999725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33414.452200, 24602.299400, 402.957612, 402.957612, 0.000000, X, Y) && !ellipse(32558.500400, 24043.483940, 370.272811, 341.436010, 51.815670, X, Y) && !ellipse(30375.090424, 23628.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.424805, 22565.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33481.440186, 22643.735382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.912000, 27788.350000, 1224.304035, 1224.304035, 0.162000, X, Y) && !ellipse(28934.370636, 27979.980530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31422.504791, 27680.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29436.784485, 27808.186859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29968.862976, 27500.296387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31539.740265, 27047.905945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.000214, 26113.330322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.754700, 24723.770294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31026.297424, 24312.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31924.002655, 24146.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29349.718109, 24386.823181, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 08:33:39 2013] Writing fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src101.gif [Tue May 7 10:01:07 2013] Mean detx,y = (4044.13, 11.94) [Tue May 7 10:01:09 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 10:01:21 2013] Binned source spectrum to 10 counts/bin [Tue May 7 10:01:21 2013] Setting source spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src101_src_b10.pi.gz [Tue May 7 10:01:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src101_bgd.pi.gz [Wed May 8 03:07:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 03:07:50 2013] rmf not generated due to insufficient counts [Wed May 8 03:25:51 2013] Updating aperture counts using extracted products [Wed May 8 03:25:51 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src101_src_b10.pi.gz = 1619.00 [Wed May 8 03:25:52 2013] Total counts from fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src101_bgd.pi.gz = 31.00 [Wed May 8 03:25:52 2013] Got source and background scale factors 1102205.000000, 48764.000000 [Wed May 8 03:25:52 2013] User source parameters: Position = (358.4, 294.0) = 0 42 28.72 41 14 47.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 918.3 +/- 41.2 Background aperture counts = 700.7 Rate = 0.03 +/- 0.001 [Wed May 8 03:25:52 2013] Updating counts from extracted products [Wed May 8 03:25:52 2013] Set source signif. to 918.31/26.47 = 34.69 [Wed May 8 03:25:58 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 03:25:58 2013] Using photon index=1.80, rate=0.0332, arf fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src101.arf [Wed May 8 03:25:58 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 03:25:58 2013] Updating source flux to 1.3e-13 [Wed May 8 03:27:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 03:27:55 2013] xmm0650560301/analysis//spectral/fullrun_pn_xmm0650560301_pi300-10000_pass1_cl_src101_pl.csv not found, spectral fit skipped or did not complete