[Tue May  7 08:29:32 2013] Detection parameters:
  Position = (322.7, 294.0) = 0 42 42.48 41 14 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1012.0 +/- 40.9
  Background counts = 66.3
  Rate = 0.03 +/- 0.001

[Tue May  7 08:29:35 2013] Off-axis axis estimate = 1.79'
[Tue May  7 08:30:37 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:30:37 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Tue May  7 08:30:37 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Tue May  7 08:30:37 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.32"
[Tue May  7 08:30:39 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src30.ximg exists
[Tue May  7 08:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src30.csv
[Tue May  7 08:30:39 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue May  7 08:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src30.csv
[Tue May  7 08:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:30:40 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue May  7 08:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue May  7 08:30:40 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue May  7 08:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue May  7 08:30:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:31:36 2013] Warning, spatial fit 30 centroid is now closest to src. 85
[Tue May  7 08:31:36 2013] Spatial fit model total counts = 2228.760000, observed total counts = 2231.000000
[Tue May  7 08:31:36 2013] Offset between fit and detection position for source 41 = 0.300112 pixels
[Tue May  7 08:31:36 2013] Warning, changing simple spatial fit ID from 30 to 49
[Tue May  7 08:31:36 2013] 2257.723000 total counts/ 1780.630000 bgd. counts: snr = 11.306188
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.300112 pixels
  Position = (323.0, 294.1) = 0 42 42.38 41 14 49.2
  Extent = 6.0 (5.5-6.7)", rotation angle = 0
  Source counts = 477.1 +/- 47.5
  Background counts = 1780.6
  Rate = 0.01 +/- 0.001
[Tue May  7 08:31:36 2013] Vigneting correction estimate = 1.000000
[Tue May  7 08:31:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 08:31:36 2013] Assessing source extent using major axis lower bound
[Tue May  7 08:31:36 2013] Source does appear to be extended
[Tue May  7 08:31:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 08:32:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 08:32:12 2013] Initial guess for spatial extent in simple fitting = 6.02"
[Tue May  7 08:32:12 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.128
[Tue May  7 08:32:12 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 6.02"
[Tue May  7 08:32:13 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src29.ximg exists
[Tue May  7 08:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src29.csv
[Tue May  7 08:32:13 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue May  7 08:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src29.csv
[Tue May  7 08:32:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:32:14 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue May  7 08:32:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue May  7 08:32:14 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue May  7 08:32:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue May  7 08:32:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:33:10 2013] Spatial fit model total counts = 3064.390000, observed total counts = 2778.000000
[Tue May  7 08:33:10 2013] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 08:33:10 2013] Vigneting correction estimate = 1.000000
[Tue May  7 08:33:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 08:33:10 2013] Assessing source extent using major axis lower bound
[Tue May  7 08:33:10 2013] Source does appear to be extended
[Tue May  7 08:33:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 03:24:14 2013] XMMSAS src. selection expression = ellipse(28050.310000, 25540.390000, 360.957610, 360.957610, 0.000000, X, Y)
[Wed May  8 03:24:14 2013] Not overwriting source region fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_src.reg
[Wed May  8 03:24:14 2013] Extracting stamp from image fullrun_mos2_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (302, 273) - (344, 315)
[Wed May  8 03:24:14 2013] XMMSAS bgd. selection expression = annulus(28050.310000, 25540.390000, 601.596017, 1203.192035, X, Y) && !ellipse(28900.797793, 27038.424889, 399.784365, 376.362441, 32.181245, X, Y) && !ellipse(26678.866420, 26229.012800, 563.990416, 378.316011, 300.463900, X, Y) && !ellipse(26509.662476, 27007.554810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29309.096000, 27214.782000, 1314.808038, 1314.808038, 0.000000, X, Y) && !ellipse(28725.438000, 25125.374000, 400.027212, 400.027212, 0.000000, X, Y) && !ellipse(27404.779053, 24578.115387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29363.378235, 24396.516693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27307.857208, 25126.716125, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  8 03:24:14 2013] Writing fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41.gif
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/events/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_src.evt and ../../xmm0650560301/products/events/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_bgd.evt exist, delete to re-create
[Wed May  8 03:24:17 2013] Mean detx,y = (-927.25, -1217.57) 
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/images/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_src.img and ../../xmm0650560301/products/images/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_bgd.img exist, delete to re-create
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/spectra/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_src_b10.pi.gz and ../../xmm0650560301/products/spectra/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_bgd.pi exist, delete to re-create
[Wed May  8 03:24:17 2013] Setting source spectrum file to fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed May  8 03:24:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/lightcurves/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_src.lc and ../../xmm0650560301/products/lightcurves/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_bgd.lc exist, delete to re-create
[Wed May  8 03:24:33 2013] fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41.rmf exists, delete to re-create
[Wed May  8 03:24:33 2013] fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41.arf exists, delete to re-create
[Wed May  8 03:26:18 2013] Updating aperture counts using extracted products
[Wed May  8 03:26:18 2013] Total counts from fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 1028.00
[Wed May  8 03:26:19 2013] Total counts from fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_bgd.pi.gz = 2131.00
[Wed May  8 03:26:19 2013] Got source and background scale factors 396492.000000, 1110716.000000
[Wed May  8 03:26:19 2013] User source parameters:
  Position = (323.0, 294.1) = 0 42 42.38 41 14 49.2
  Extent = 6.0 (5.5-6.7)", rotation angle = 0
  Source aperture counts = 267.3 +/- 33.1
  Background aperture counts = 760.7
  Rate = 0.008 +/- 0.001

[Wed May  8 03:26:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:26:32 2013] Using photon index=1.80, rate=0.0144, arf fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41.arf
[Wed May  8 03:26:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 03:26:32 2013] Updating source flux to 2e-13
[Wed May  8 03:27:05 2013] Flag p found in src. 41 procflags, skipping spectral fitting
[Wed May  8 03:27:31 2013] xmm0650560301/analysis//spectral/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete