[Tue May  7 08:29:32 2013] Detection parameters:
  Position = (372.9, 284.8) = 0 42 23.12 41 14 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 622.6 +/- 32.0
  Background counts = 40.0
  Rate = 0.02 +/- 0.001

[Tue May  7 08:29:35 2013] Off-axis axis estimate = 5.49'
[Tue May  7 08:30:37 2013] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:30:37 2013] Initial guess for spatial extent in simple fitting = 9.17"
[Tue May  7 08:30:37 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.102
[Tue May  7 08:30:37 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 9.17"
[Tue May  7 08:30:39 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src37.ximg exists
[Tue May  7 08:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src37.csv
[Tue May  7 08:30:39 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue May  7 08:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src37.csv
[Tue May  7 08:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:30:40 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue May  7 08:30:40 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue May  7 08:30:41 2013] Fit fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Tue May  7 08:31:36 2013] Spatial fit model total counts = 1538.860000, observed total counts = 1535.000000
[Tue May  7 08:31:36 2013] Offset between fit and detection position for source 40 = 0.093648 pixels
[Tue May  7 08:31:36 2013] 1383.514000 total counts/ 1048.250000 bgd. counts: snr = 10.355105
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.093648 pixels
  Position = (372.9, 284.7) = 0 42 23.13 41 14 8.0
  Extent = 3.8 (3.5-4.2)", rotation angle = 0
  Source counts = 335.3 +/- 37.2
  Background counts = 1048.2
  Rate = 0.01 +/- 0.001
[Tue May  7 08:31:36 2013] Vigneting correction estimate = 1.000000
[Tue May  7 08:31:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 08:31:36 2013] Assessing source extent using major axis lower bound
[Tue May  7 08:31:36 2013] Source does appear to be extended
[Tue May  7 08:31:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 08:32:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 08:32:12 2013] Initial guess for spatial extent in simple fitting = 3.78"
[Tue May  7 08:32:12 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.800
[Tue May  7 08:32:12 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 3.78"
[Tue May  7 08:32:13 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src36.ximg exists
[Tue May  7 08:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src36.csv
[Tue May  7 08:32:13 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src36_1.ximg exists
[Tue May  7 08:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src36.csv
[Tue May  7 08:32:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:32:14 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Tue May  7 08:32:15 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Tue May  7 08:32:15 2013] Fit fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Tue May  7 08:33:10 2013] Spatial fit model total counts = 1538.240000, observed total counts = 1535.000000
[Tue May  7 08:33:10 2013] Offset between fit and detection position for source 40 = 0.009562 pixels
[Tue May  7 08:33:10 2013] 1447.283000 total counts/ 1117.980000 bgd. counts: snr = 9.848695
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.009562 pixels
  Position = (372.9, 284.7) = 0 42 23.13 41 14 7.9
  Extent = 3.7 (3.5-4.1)", rotation angle = 0
  Source counts = 329.3 +/- 38.0
  Background counts = 1118.0
  Rate = 0.01 +/- 0.001
[Tue May  7 08:33:10 2013] Vigneting correction estimate = 1.000000
[Tue May  7 08:33:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 08:33:10 2013] Assessing source extent using major axis lower bound
[Tue May  7 08:33:10 2013] Source does appear to be extended
[Tue May  7 08:33:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 08:33:10 2013] Source is confused with source 87
[Wed May  8 03:24:14 2013] XMMSAS src. selection expression = ellipse(32391.745060, 24718.735800, 224.373606, 224.373606, 0.000000, X, Y)
[Wed May  8 03:24:14 2013] Not overwriting source region fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_src.reg
[Wed May  8 03:24:14 2013] Extracting stamp from image fullrun_mos2_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (360, 272) - (386, 298)
[Wed May  8 03:24:14 2013] XMMSAS bgd. selection expression = annulus(32391.745060, 24718.735800, 373.956011, 747.912022, X, Y) && !ellipse(33405.501038, 24595.450073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32563.686000, 24040.351800, 306.384809, 306.384809, 0.000000, X, Y) && !ellipse(31951.718506, 24153.254944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31544.014000, 24944.678000, 1385.672040, 1385.672040, 0.000000, X, Y)
[Wed May  8 03:24:14 2013] Writing fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40.gif
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/events/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_src.evt and ../../xmm0650560301/products/events/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_bgd.evt exist, delete to re-create
[Wed May  8 03:24:17 2013] Mean detx,y = (-5289.88, -454.08) 
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/images/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_src.img and ../../xmm0650560301/products/images/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_bgd.img exist, delete to re-create
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/spectra/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_src_b10.pi.gz and ../../xmm0650560301/products/spectra/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_bgd.pi exist, delete to re-create
[Wed May  8 03:24:17 2013] Setting source spectrum file to fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed May  8 03:24:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/lightcurves/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_src.lc and ../../xmm0650560301/products/lightcurves/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_bgd.lc exist, delete to re-create
[Wed May  8 03:24:33 2013] fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40.rmf exists, delete to re-create
[Wed May  8 03:24:33 2013] fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40.arf exists, delete to re-create
[Wed May  8 03:26:20 2013] Updating aperture counts using extracted products
[Wed May  8 03:26:20 2013] Total counts from fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 437.00
[Wed May  8 03:26:20 2013] Total counts from fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_bgd.pi.gz = 0.00
[Wed May  8 03:26:20 2013] Got source and background scale factors 161600.000000, 0.000000
[Wed May  8 03:26:20 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May  8 03:26:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:26:32 2013] Using photon index=1.80, rate=0.00995, arf fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40.arf
[Wed May  8 03:26:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 03:26:32 2013] Updating source flux to 2e-13
[Wed May  8 03:27:05 2013] Flag c found in src. 40 procflags, skipping spectral fitting
[Wed May  8 03:27:31 2013] xmm0650560301/analysis//spectral/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete