[Tue May 7 08:29:32 2013] Detection parameters: Position = (305.3, 311.0) = 0 42 49.20 41 16 2.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 825.7 +/- 40.8 Background counts = 62.1 Rate = 0.03 +/- 0.001 [Tue May 7 08:29:35 2013] Off-axis axis estimate = 1.04' [Tue May 7 08:30:37 2013] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:30:37 2013] Initial guess for spatial extent in simple fitting = 6.95" [Tue May 7 08:30:37 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.910 [Tue May 7 08:30:37 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 6.95" [Tue May 7 08:30:39 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src35.ximg exists [Tue May 7 08:30:39 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src35_1.ximg exists [Tue May 7 08:30:39 2013] Fit fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src35 appears to have run properly [Tue May 7 08:30:40 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Tue May 7 08:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src35.csv [Tue May 7 08:30:40 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Tue May 7 08:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src35.csv [Tue May 7 08:30:40 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:31:36 2013] Warning, spatial fit 35 centroid is now closest to src. 76 [Tue May 7 08:31:36 2013] Source 39 is offset by 1.565247 and -5.309876 pixels which is larger than 2 X fitted extent = 2.011370 x 2.011370, not incorporating fit results [Tue May 7 08:31:36 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:31:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:31:36 2013] Assessing source extent using major [Tue May 7 08:31:36 2013] Source does appear to be extended [Tue May 7 08:31:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:32:12 2013] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:32:12 2013] Initial guess for spatial extent in simple fitting = 6.95" [Tue May 7 08:32:12 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.910 [Tue May 7 08:32:12 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 6.95" [Tue May 7 08:32:13 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src34.ximg exists [Tue May 7 08:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src34.csv [Tue May 7 08:32:13 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src34_1.ximg exists [Tue May 7 08:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src34.csv [Tue May 7 08:32:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src34_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:14 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists [Tue May 7 08:32:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src34.csv [Tue May 7 08:32:14 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists [Tue May 7 08:32:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src34.csv [Tue May 7 08:32:14 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:33:10 2013] Source 39 is offset by -6.121420 and -7.398519 pixels which is larger than 2 X fitted extent = 0.798460 x 0.798460, not incorporating fit results [Tue May 7 08:33:10 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:33:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:33:10 2013] Assessing source extent using major [Tue May 7 08:33:10 2013] Source does appear to be extended [Tue May 7 08:33:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 03:24:14 2013] XMMSAS src. selection expression = ellipse(26509.662476, 27007.554810, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 03:24:14 2013] Not overwriting source region fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_src.reg [Wed May 8 03:24:14 2013] Extracting stamp from image fullrun_mos2_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (268, 273) - (343, 348) [Wed May 8 03:24:14 2013] XMMSAS bgd. selection expression = annulus(26509.662476, 27007.554810, 1087.500000, 2175.000000, X, Y) && !ellipse(28900.797793, 27038.424889, 399.784365, 376.362441, 32.181245, X, Y) && !ellipse(26983.501400, 27472.212000, 535.913615, 535.913615, 0.000000, X, Y) && !ellipse(26678.866420, 26229.012800, 563.990416, 378.316011, 300.463900, X, Y) && !ellipse(27620.334520, 27123.986800, 351.033610, 351.033610, 0.000000, X, Y) && !ellipse(25253.802000, 27027.248000, 339.832810, 339.832810, 0.000000, X, Y) && !ellipse(24099.229200, 27091.060500, 349.962410, 349.962410, 0.000000, X, Y) && !ellipse(28050.310000, 25540.390000, 481.276814, 481.276814, 0.000000, X, Y) && !ellipse(27431.997260, 28736.581760, 634.180018, 634.180018, 0.000000, X, Y) && !ellipse(29309.096000, 27214.782000, 1314.808038, 1314.808038, 0.000000, X, Y) && !ellipse(28725.438000, 25125.374000, 400.027212, 400.027212, 0.000000, X, Y) && !ellipse(24450.995239, 26383.806122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27404.779053, 24578.115387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29363.378235, 24396.516693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25726.804000, 28802.322000, 862.864025, 862.864025, 0.000000, X, Y) && !ellipse(27307.857208, 25126.716125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.461090, 29626.239410, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 8 03:24:14 2013] Writing fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39.gif [Wed May 8 03:24:17 2013] ../../xmm0650560301/products/events/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_src.evt and ../../xmm0650560301/products/events/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_bgd.evt exist, delete to re-create [Wed May 8 03:24:17 2013] Mean detx,y = (875.80, -276.12) [Wed May 8 03:24:17 2013] ../../xmm0650560301/products/images/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_src.img and ../../xmm0650560301/products/images/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_bgd.img exist, delete to re-create [Wed May 8 03:24:17 2013] ../../xmm0650560301/products/spectra/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_src_b10.pi.gz and ../../xmm0650560301/products/spectra/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_bgd.pi exist, delete to re-create [Wed May 8 03:24:17 2013] Setting source spectrum file to fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_src_b10.pi.gz [Wed May 8 03:24:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_bgd.pi.gz [Wed May 8 03:24:17 2013] ../../xmm0650560301/products/lightcurves/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_src.lc and ../../xmm0650560301/products/lightcurves/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_bgd.lc exist, delete to re-create [Wed May 8 03:24:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 03:24:33 2013] rmf not generated due to insufficient counts [Wed May 8 03:24:33 2013] fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39.arf exists, delete to re-create [Wed May 8 03:26:20 2013] Updating aperture counts using extracted products [Wed May 8 03:26:20 2013] Total counts from fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 4921.00 [Wed May 8 03:26:20 2013] Total counts from fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_bgd.pi.gz = 6517.00 [Wed May 8 03:26:20 2013] Got source and background scale factors 1339200.000000, 4528348.000000 [Wed May 8 03:26:20 2013] User source parameters: Position = (305.3, 311.0) = 0 42 49.20 41 16 2.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 2993.7 +/- 71.2 Background aperture counts = 1927.3 Rate = 0.09 +/- 0.002 [Wed May 8 03:26:20 2013] Updating counts from extracted products [Wed May 8 03:26:20 2013] Set source signif. to 2993.68/43.90 = 68.19 [Wed May 8 03:26:32 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 03:26:32 2013] Using photon index=1.80, rate=0.0905, arf fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39.arf [Wed May 8 03:26:32 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 03:26:32 2013] Updating source flux to 1.1e-12 [Wed May 8 03:27:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 03:27:31 2013] xmm0650560301/analysis//spectral/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete