[Tue May  7 08:29:32 2013] Detection parameters:
  Position = (351.9, 360.9) = 0 42 31.19 41 19 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 872.6 +/- 36.4
  Background counts = 30.2
  Rate = 0.03 +/- 0.001

[Tue May  7 08:29:35 2013] Off-axis axis estimate = 5.96'
[Tue May  7 08:30:37 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:30:37 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Tue May  7 08:30:37 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.269
[Tue May  7 08:30:37 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 9.41"
[Tue May  7 08:30:39 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src28.ximg exists
[Tue May  7 08:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src28.csv
[Tue May  7 08:30:39 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue May  7 08:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src28.csv
[Tue May  7 08:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:30:40 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue May  7 08:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue May  7 08:30:40 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue May  7 08:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue May  7 08:30:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:31:36 2013] Warning, spatial fit 28 centroid is now closest to src. 60
[Tue May  7 08:31:36 2013] Vigneting correction estimate = 1.000000
[Tue May  7 08:31:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 08:31:36 2013] Assessing source extent using major
[Tue May  7 08:31:36 2013] Source does appear to be extended
[Tue May  7 08:31:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 08:32:12 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:32:12 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Tue May  7 08:32:12 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.269
[Tue May  7 08:32:12 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 9.41"
[Tue May  7 08:32:13 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src27.ximg exists
[Tue May  7 08:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src27.csv
[Tue May  7 08:32:13 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue May  7 08:32:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src27.csv
[Tue May  7 08:32:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:32:14 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue May  7 08:32:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Tue May  7 08:32:14 2013] fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue May  7 08:32:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Tue May  7 08:32:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 08:33:10 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 11.522266 pixels away
[Tue May  7 08:33:10 2013] Vigneting correction estimate = 1.000000
[Tue May  7 08:33:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 08:33:10 2013] Assessing source extent using major
[Tue May  7 08:33:10 2013] Source does appear to be extended
[Tue May  7 08:33:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 03:24:14 2013] XMMSAS src. selection expression = ellipse(30568.323456, 31346.666534, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 03:24:14 2013] Not overwriting source region fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_src.reg
[Wed May  8 03:24:14 2013] Extracting stamp from image fullrun_mos2_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (314, 323) - (389, 398)
[Wed May  8 03:24:14 2013] XMMSAS bgd. selection expression = annulus(30568.323456, 31346.666534, 1087.500000, 2175.000000, X, Y) && !ellipse(31719.030320, 30860.575800, 383.017611, 383.017611, 0.000000, X, Y) && !ellipse(28535.413600, 30271.050000, 393.576011, 393.576011, 0.000000, X, Y) && !ellipse(29683.256165, 31884.105530, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  8 03:24:14 2013] Writing fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34.gif
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/events/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_src.evt and ../../xmm0650560301/products/events/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_bgd.evt exist, delete to re-create
[Wed May  8 03:24:17 2013] Mean detx,y = (-1219.76, 5081.32) 
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/images/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_src.img and ../../xmm0650560301/products/images/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_bgd.img exist, delete to re-create
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/spectra/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_src_b10.pi.gz and ../../xmm0650560301/products/spectra/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_bgd.pi exist, delete to re-create
[Wed May  8 03:24:17 2013] Setting source spectrum file to fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed May  8 03:24:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed May  8 03:24:17 2013] ../../xmm0650560301/products/lightcurves/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_src.lc and ../../xmm0650560301/products/lightcurves/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_bgd.lc exist, delete to re-create
[Wed May  8 03:24:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  8 03:24:33 2013] rmf not generated due to insufficient counts
[Wed May  8 03:24:33 2013] fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34.arf exists, delete to re-create
[Wed May  8 03:26:18 2013] Updating aperture counts using extracted products
[Wed May  8 03:26:18 2013] Total counts from fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 957.00
[Wed May  8 03:26:18 2013] Total counts from fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_bgd.pi.gz = 1324.00
[Wed May  8 03:26:18 2013] Got source and background scale factors 1321548.000000, 7928039.000000
[Wed May  8 03:26:18 2013] User source parameters:
  Position = (351.9, 360.9) = 0 42 31.19 41 19 39.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 736.3 +/- 31.9
  Background aperture counts = 220.7
  Rate = 0.02 +/- 0.001

[Wed May  8 03:26:18 2013] Updating counts from extracted products
[Wed May  8 03:26:18 2013] Set source signif. to 736.30/14.86 = 49.56
[Wed May  8 03:26:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:26:32 2013] Using photon index=1.80, rate=0.0222, arf fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34.arf
[Wed May  8 03:26:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 03:26:32 2013] Updating source flux to 3.3e-13
[Wed May  8 03:27:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 03:27:31 2013] xmm0650560301/analysis//spectral/fullrun_mos2_xmm0650560301_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete