[Tue May 7 08:29:29 2013] Detection parameters: Position = (289.3, 345.9) = 0 42 55.35 41 18 34.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 241.0 +/- 21.8 Background counts = 41.4 Rate = 0.009 +/- 0.0008 [Tue May 7 08:29:30 2013] Off-axis axis estimate = 3.51' [Tue May 7 08:30:33 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:30:33 2013] Initial guess for spatial extent in simple fitting = 8.18" [Tue May 7 08:30:33 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.838 [Tue May 7 08:30:33 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 8.18" [Tue May 7 08:30:35 2013] fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_src55.ximg exists [Tue May 7 08:30:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_src55.csv [Tue May 7 08:30:35 2013] fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_src55_1.ximg exists [Tue May 7 08:30:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_src55.csv [Tue May 7 08:30:35 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:30:37 2013] fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Tue May 7 08:30:37 2013] fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Tue May 7 08:30:37 2013] Fit fullrun_mos1_xmm0650560301_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly [Tue May 7 08:31:22 2013] Source 52 is offset by 3.387823 and -3.117163 pixels which is larger than 2 X fitted extent = 0.993503 x 0.993503, not incorporating fit results [Tue May 7 08:31:22 2013] Source 52 is offset by -7.187533 and -4.511278 pixels which is larger than 2 X fitted extent = 2.218878 x 2.218878, not incorporating fit results [Tue May 7 08:31:22 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:31:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:31:22 2013] Assessing source extent using major [Tue May 7 08:31:22 2013] Source does appear to be extended [Tue May 7 08:31:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 08:32:09 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:32:09 2013] Initial guess for spatial extent in simple fitting = 8.18" [Tue May 7 08:32:09 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.838 [Tue May 7 08:32:09 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 8.18" [Tue May 7 08:32:10 2013] fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_src55.ximg exists [Tue May 7 08:32:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_src55.csv [Tue May 7 08:32:10 2013] fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_src55_1.ximg exists [Tue May 7 08:32:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_src55.csv [Tue May 7 08:32:10 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_src55_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:11 2013] fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src55.ximg exists [Tue May 7 08:32:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src55.csv [Tue May 7 08:32:11 2013] fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists [Tue May 7 08:32:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src55.csv [Tue May 7 08:32:11 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src55_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0650560301_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 08:32:54 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 16.273519 pixels away [Tue May 7 08:32:54 2013] Vigneting correction estimate = 1.000000 [Tue May 7 08:32:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 08:32:54 2013] Assessing source extent using major [Tue May 7 08:32:54 2013] Source does appear to be extended [Tue May 7 08:32:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 03:23:57 2013] XMMSAS src. selection expression = ellipse(25123.718597, 30047.828857, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 03:23:57 2013] Not overwriting source region fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_src.reg [Wed May 8 03:23:57 2013] Extracting stamp from image fullrun_mos1_xmm0650560301_pi300-10000_cl_sm2.00.img.gz, (252, 308) - (327, 383) [Wed May 8 03:23:57 2013] XMMSAS bgd. selection expression = annulus(25123.718597, 30047.828857, 1087.500000, 2175.000000, X, Y) && !ellipse(26967.656000, 27459.030000, 661.231219, 375.297611, 77.148000, X, Y) && !ellipse(25809.078000, 30452.094000, 485.373614, 485.373614, 0.000000, X, Y) && !ellipse(24153.973800, 30940.112000, 378.027211, 378.027211, 0.000000, X, Y) && !ellipse(23192.978720, 29455.972400, 405.663212, 405.663212, 0.000000, X, Y) && !ellipse(26504.278076, 27013.010895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.396600, 28593.072600, 275.272008, 275.272008, 0.000000, X, Y) && !ellipse(25755.585200, 27930.791000, 285.820008, 285.820008, 0.000000, X, Y) && !ellipse(26905.338000, 29727.140000, 1261.280036, 1261.280036, 0.000000, X, Y) && !ellipse(27471.035309, 29040.377991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24781.333984, 31740.404724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26064.743286, 28819.068024, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 8 03:23:57 2013] Writing fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52.gif [Wed May 8 03:24:00 2013] ../../xmm0650560301/products/events/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_src.evt and ../../xmm0650560301/products/events/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_bgd.evt exist, delete to re-create [Wed May 8 03:24:00 2013] Mean detx,y = (2306.86, -3409.80) [Wed May 8 03:24:00 2013] ../../xmm0650560301/products/images/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_src.img and ../../xmm0650560301/products/images/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_bgd.img exist, delete to re-create [Wed May 8 03:24:00 2013] ../../xmm0650560301/products/spectra/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_src_b10.pi.gz and ../../xmm0650560301/products/spectra/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_bgd.pi exist, delete to re-create [Wed May 8 03:24:00 2013] Setting source spectrum file to fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_src_b10.pi.gz [Wed May 8 03:24:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_bgd.pi.gz [Wed May 8 03:24:00 2013] ../../xmm0650560301/products/lightcurves/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_src.lc and ../../xmm0650560301/products/lightcurves/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_bgd.lc exist, delete to re-create [Wed May 8 03:24:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 03:24:13 2013] rmf not generated due to insufficient counts [Wed May 8 03:24:13 2013] fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52.arf exists, delete to re-create [Wed May 8 03:26:07 2013] Updating aperture counts using extracted products [Wed May 8 03:26:07 2013] Total counts from fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 996.00 [Wed May 8 03:26:07 2013] Total counts from fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_bgd.pi.gz = 1542.00 [Wed May 8 03:26:07 2013] Got source and background scale factors 1254096.000000, 4973568.000000 [Wed May 8 03:26:07 2013] User source parameters: Position = (289.3, 345.9) = 0 42 55.35 41 18 34.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 607.2 +/- 32.6 Background aperture counts = 388.8 Rate = 0.02 +/- 0.001 [Wed May 8 03:26:07 2013] Updating counts from extracted products [Wed May 8 03:26:07 2013] Set source signif. to 607.18/19.72 = 30.79 [Wed May 8 03:26:13 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 03:26:13 2013] Using photon index=1.80, rate=0.0183, arf fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52.arf [Wed May 8 03:26:13 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 03:26:13 2013] Updating source flux to 2.5e-13 [Wed May 8 03:26:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 03:27:05 2013] xmm0650560301/analysis//spectral/fullrun_mos1_xmm0650560301_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete