[Sun Feb  5 21:30:36 2012] Detection parameters:
  Position = (445.8, 155.6) = 1 33 21.81 30 16 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.8 +/- 29.2
  Background counts = 251.4
  Rate = 0.001 +/- 0.0002

[Sun Feb  5 21:30:37 2012] Off-axis axis estimate = 14.88'
[Sun Feb  5 21:36:42 2012] Using EEF radius (= 13.87 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 21:36:42 2012] Initial guess for spatial extent in simple fitting = 13.87"
[Sun Feb  5 21:36:42 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.901
[Sun Feb  5 21:36:42 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 13.87"
[Sun Feb  5 23:11:28 2012] fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_src41.ximg exists
[Sun Feb  5 23:11:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_src41.csv
[Sun Feb  5 23:11:28 2012] fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Feb  5 23:11:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_src41.csv
[Sun Feb  5 23:11:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 23:11:29 2012] fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Feb  5 23:11:29 2012] fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Feb  5 23:11:29 2012] Fit fullrun_pn_xmm0650510601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Mon Feb  6 01:29:51 2012] Spatial fit model total counts = 1640.670000, observed total counts = 1658.000000
[Mon Feb  6 01:29:51 2012] Offset between fit and detection position for source 49 = 6.536732 pixels
[Mon Feb  6 01:29:51 2012] 1711.590000 total counts/ 360.780000 bgd. counts: snr = 71.116936
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 6.536732 pixels
  Position = (442.7, 149.8) = 1 33 22.84 30 16 24.4
  Extent = 27.7 (26.4-55.5)", rotation angle = 0
  Source counts = 1350.8 +/- 41.4
  Background counts = 360.8
  Rate = 0.01 +/- 0.0004
[Mon Feb  6 01:29:51 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 01:29:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 01:29:51 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 01:29:51 2012] Source does appear to be extended
[Mon Feb  6 01:29:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 01:30:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 01:30:13 2012] Initial guess for spatial extent in simple fitting = 27.73"
[Mon Feb  6 01:30:13 2012] source mask rpix=6.4, npix_max = 189, mask sum = 186, frac = 0.984
[Mon Feb  6 01:30:13 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 27.73"
[Mon Feb  6 03:31:24 2012] fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_src41.ximg exists
[Mon Feb  6 03:31:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_src41.csv
[Mon Feb  6 03:31:24 2012] fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_src41_1.ximg exists
[Mon Feb  6 03:31:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_src41.csv
[Mon Feb  6 03:31:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 03:31:25 2012] fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Mon Feb  6 03:31:25 2012] fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Mon Feb  6 03:31:25 2012] Fit fullrun_pn_xmm0650510601_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Mon Feb  6 05:35:16 2012] Warning, spatial fit 41 centroid is now closest to src. 65
[Mon Feb  6 05:35:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:35:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:35:16 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:35:16 2012] Source does appear to be extended
[Mon Feb  6 05:35:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:35:39 2012] Counts = 1350.810000, rescaling region sizes by 2.000000
[Mon Feb  6 05:35:39 2012] XMMSAS src. selection expression = ellipse(38469.204000, 12983.922000, 3328.176096, 3328.176096, 0.000000, X, Y)
[Mon Feb  6 05:35:39 2012] Writing source region out to fullrun_pn_xmm0650510601_pi300-10000_pass1_cl_src49_src.reg
[Mon Feb  6 05:35:39 2012] Extracting stamp from image fullrun_pn_xmm0650510601_pi300-10000_cl_sm2.00.img.gz, (251, 0) - (595, 341)
[Mon Feb  6 05:35:39 2012] XMMSAS bgd. selection expression = annulus(38469.204000, 12983.922000, 11093.920319, 22187.840638, X, Y) && !ellipse(36949.947400, 26160.867000, 1562.688045, 1562.688045, 0.000000, X, Y) && !ellipse(15438.969810, 28279.154200, 1425.996041, 1425.996041, 0.000000, X, Y) && !ellipse(35399.959524, 32060.892897, 407.679077, 316.838339, 90.000000, X, Y) && !ellipse(29658.243134, 31798.488800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30279.780182, 33218.191376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36525.173737, 34314.089233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16187.916153, 33452.988892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19526.651337, 35067.329010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20573.688690, 35166.680206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24578.749939, 34634.354797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36272.529114, 33736.769043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23445.416420, 33256.977200, 523.335215, 523.335215, 0.000000, X, Y) && !ellipse(22353.997345, 12528.834427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33703.427185, 31994.392792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35691.207794, 31660.958282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28524.207800, 31220.483400, 445.504813, 445.504813, 0.000000, X, Y) && !ellipse(35638.844020, 30685.818000, 560.600016, 560.600016, 0.000000, X, Y) && !ellipse(28313.187832, 29387.240200, 417.398412, 349.942410, 117.497047, X, Y) && !ellipse(31713.739100, 29038.612800, 384.518411, 384.518411, 0.000000, X, Y) && !ellipse(39348.648712, 27901.187225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22197.478200, 27233.251000, 380.755211, 380.755211, 0.000000, X, Y) && !ellipse(34769.705536, 21109.319611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.124756, 20683.926834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.042600, 20482.695800, 397.396811, 397.396811, 0.000000, X, Y) && !ellipse(34175.167480, 19238.109390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19025.636000, 37965.714000, 3886.000112, 3886.000112, 0.000000, X, Y) && !ellipse(18062.792969, 34418.155762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34491.012000, 33700.134000, 1789.832052, 1789.832052, 0.000000, X, Y) && !ellipse(29229.619400, 33543.930400, 453.660813, 453.660813, 0.000000, X, Y) && !ellipse(34792.392761, 33098.295563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28559.522980, 32532.235352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21653.397200, 28562.223040, 565.494416, 565.494416, 0.000000, X, Y) && !ellipse(16543.236069, 28102.419861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37329.180328, 27590.272675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30886.822600, 25813.556400, 398.001611, 296.499209, 313.524440, X, Y) && !ellipse(35982.217590, 23702.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24127.406220, 23011.422200, 436.103213, 436.103213, 0.000000, X, Y) && !ellipse(30025.701000, 21759.167600, 434.501613, 434.501613, 0.000000, X, Y) && !ellipse(29739.827600, 20979.106800, 526.172015, 526.172015, 0.000000, X, Y) && !ellipse(17908.061800, 19684.469380, 336.888010, 336.888010, 0.000000, X, Y) && !ellipse(31886.690300, 19309.388800, 542.294412, 542.294412, 0.000000, X, Y) && !ellipse(41426.214447, 18888.662399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40787.101105, 18391.383377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40661.814400, 17848.863320, 1202.096035, 1202.096035, 0.000000, X, Y) && !ellipse(24326.058540, 14503.183000, 587.604817, 255.982407, 348.741000, X, Y) && !ellipse(24507.969513, 13804.526886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21864.717926, 8460.854294, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 05:35:39 2012] Writing fullrun_pn_xmm0650510601_pi300-10000_pass1_cl_src49.gif
[Mon Feb  6 06:38:31 2012] Mean detx,y = (-16548.18, -5446.18) 
[Mon Feb  6 06:38:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 06:43:14 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 06:43:15 2012] Setting source spectrum file to fullrun_pn_xmm0650510601_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Feb  6 06:43:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650510601_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Mon Feb  6 10:27:33 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:27:33 2012] Error reading totcts from fullrun_pn_xmm0650510601_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Feb  6 10:27:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:27:34 2012] Using photon index=1.80, rate=0.0129, arf fullrun_pn_xmm0650510601_pi300-10000_pass1_cl_src49.arf
[Mon Feb  6 10:27:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:27:34 2012] Updating source flux to 9.8e-14