[Sun Feb  5 21:30:38 2012] Detection parameters:
  Position = (409.3, 367.8) = 1 33 33.95 30 32 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5226.2 +/- 87.7
  Background counts = 113.5
  Rate = 0.04 +/- 0.0007

[Sun Feb  5 21:30:39 2012] Off-axis axis estimate = 9.48'
[Sun Feb  5 23:11:29 2012] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 23:11:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb  5 23:11:29 2012] Initial guess for spatial extent in simple fitting = 11.17"
[Sun Feb  5 23:11:29 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.956
[Sun Feb  5 23:11:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.17"
[Sun Feb  5 23:39:52 2012] fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_src3.ximg exists
[Sun Feb  5 23:39:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_src3.csv
[Sun Feb  5 23:39:52 2012] fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Feb  5 23:39:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_src3.csv
[Sun Feb  5 23:39:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 23:39:52 2012] fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb  5 23:39:52 2012] fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb  5 23:39:52 2012] Fit fullrun_mos1_xmm0650510601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Feb  6 01:29:54 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Mon Feb  6 01:29:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 01:29:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 01:29:54 2012] Assessing source extent using major
[Mon Feb  6 01:29:54 2012] Source does appear to be extended
[Mon Feb  6 01:29:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 03:31:25 2012] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Mon Feb  6 03:31:25 2012] Initial guess for spatial extent in simple fitting = 11.17"
[Mon Feb  6 03:31:25 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.956
[Mon Feb  6 03:31:25 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.17"
[Mon Feb  6 03:59:42 2012] fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_src3.ximg exists
[Mon Feb  6 03:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_src3.csv
[Mon Feb  6 03:59:42 2012] fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Feb  6 03:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_src3.csv
[Mon Feb  6 03:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 03:59:42 2012] fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Feb  6 03:59:42 2012] fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Feb  6 03:59:42 2012] Fit fullrun_mos1_xmm0650510601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Feb  6 05:35:19 2012] Warning, spatial fit 3 centroid is now closest to src. 7
[Mon Feb  6 05:35:19 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.320664 pixels away
[Mon Feb  6 05:35:19 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:35:19 2012] Assessing source extent using major
[Mon Feb  6 05:35:19 2012] Source does appear to be extended
[Mon Feb  6 05:35:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 08:23:37 2012] Counts = 5226.210449, rescaling region sizes by 2.000000
[Mon Feb  6 08:23:37 2012] XMMSAS src. selection expression = ellipse(35562.484009, 31947.372223, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Feb  6 08:23:37 2012] Writing source region out to fullrun_mos1_xmm0650510601_pi300-10000_pass1_cl_src3_src.reg
[Mon Feb  6 08:23:37 2012] Extracting stamp from image fullrun_mos1_xmm0650510601_pi300-10000_cl_sm2.00.img.gz, (334, 293) - (484, 443)
[Mon Feb  6 08:23:37 2012] XMMSAS bgd. selection expression = annulus(35562.484009, 31947.372223, 4350.000000, 8700.000000, X, Y) && !ellipse(36983.365417, 26208.457367, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28326.291300, 29368.900000, 356.259210, 356.259210, 0.000000, X, Y) && !ellipse(36277.011919, 33585.433790, 619.483850, 294.531318, 71.507319, X, Y) && !ellipse(30892.255200, 25773.680960, 441.496013, 441.496013, 0.000000, X, Y) && !ellipse(35680.521301, 30689.512268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40403.983032, 22458.613464, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 08:23:37 2012] Writing fullrun_mos1_xmm0650510601_pi300-10000_pass1_cl_src3.gif
[Mon Feb  6 08:27:17 2012] Mean detx,y = (-10715.55, -7845.77) 
[Mon Feb  6 08:27:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 08:28:17 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 08:28:17 2012] Setting source spectrum file to fullrun_mos1_xmm0650510601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb  6 08:28:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650510601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Feb  6 08:37:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb  6 08:37:12 2012] rmf not generated due to insufficient counts
[Mon Feb  6 10:27:34 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:27:34 2012] Error reading totcts from fullrun_mos1_xmm0650510601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb  6 10:27:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:27:35 2012] Using photon index=1.80, rate=0.0409, arf fullrun_mos1_xmm0650510601_pi300-10000_pass1_cl_src3.arf
[Mon Feb  6 10:27:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:27:35 2012] Updating source flux to 8.6e-13
[Mon Feb  6 10:27:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting