[Sat May 11 01:24:07 2013] Detection parameters:
  Position = (166.2, 164.7) = 5 37 32.41 -69 24 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.5 +/- 21.3
  Background counts = 46.0
  Rate = 0.003 +/- 0.0003

[Sat May 11 01:24:08 2013] Off-axis axis estimate = 13.63'
[Sat May 11 08:39:39 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Sat May 11 08:39:39 2013] Initial guess for spatial extent in simple fitting = 13.25"
[Sat May 11 08:39:39 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Sat May 11 08:39:39 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 13.25"
[Sat May 11 11:57:36 2013] fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_src18.ximg exists
[Sat May 11 11:57:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_src18.csv
[Sat May 11 11:57:36 2013] fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat May 11 11:57:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_src18.csv
[Sat May 11 11:57:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:57:37 2013] fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat May 11 11:57:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 11 11:57:37 2013] fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May 11 11:57:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 11 11:57:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650420101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 18:07:35 2013] Warning, spatial fit 18 centroid is now closest to src. 13
[Sat May 11 18:07:35 2013] Vigneting correction estimate = 1.000000
[Sat May 11 18:07:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 18:07:35 2013] Assessing source extent using major
[Sat May 11 18:07:35 2013] Source does appear to be extended
[Sat May 11 18:07:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 00:33:40 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Sun May 12 00:33:40 2013] Initial guess for spatial extent in simple fitting = 13.25"
[Sun May 12 00:33:40 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Sun May 12 00:33:40 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 13.25"
[Sun May 12 04:07:37 2013] fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_src18.ximg exists
[Sun May 12 04:07:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_src18.csv
[Sun May 12 04:07:37 2013] fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May 12 04:07:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_src18.csv
[Sun May 12 04:07:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 04:07:38 2013] fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May 12 04:07:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun May 12 04:07:38 2013] fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May 12 04:07:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun May 12 04:07:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650420101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 09:41:11 2013] Warning, spatial fit 18 centroid is now closest to src. 13
[Sun May 12 09:41:11 2013] Source 14 is offset by -6.372149 and -3.696088 pixels which is larger than
2 X fitted extent = 1.678469 x 1.678469, not incorporating fit results
[Sun May 12 09:41:11 2013] Vigneting correction estimate = 1.000000
[Sun May 12 09:41:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 09:41:11 2013] Assessing source extent using major
[Sun May 12 09:41:11 2013] Source does appear to be extended
[Sun May 12 09:41:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 17:11:21 2013] XMMSAS src. selection expression = ellipse(14410.909027, 14283.154327, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 17:11:21 2013] Writing source region out to fullrun_mos1_xmm0650420101_pi300-10000_pass1_cl_src14_src.reg
[Sun May 12 17:11:21 2013] Extracting stamp from image fullrun_mos1_xmm0650420101_pi300-10000_cl_sm2.00.img.gz, (129, 127) - (204, 202)
[Sun May 12 17:11:21 2013] XMMSAS bgd. selection expression = annulus(14410.909027, 14283.154327, 1087.500000, 2175.000000, X, Y) && !ellipse(16077.027527, 11831.456467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16207.716000, 13366.768420, 2076.824060, 259.603207, 14.374900, X, Y) && !ellipse(16023.128000, 13394.332600, 1609.816046, 314.552809, 0.000000, X, Y) && !ellipse(17350.283997, 13671.825867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13654.000000, 16330.208466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15780.930695, 14365.865128, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 17:11:21 2013] Writing fullrun_mos1_xmm0650420101_pi300-10000_pass1_cl_src14.gif
[Sun May 12 17:20:55 2013] Mean detx,y = (-11996.97, 11040.71) 
[Sun May 12 17:20:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 17:21:10 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 17:21:10 2013] Setting source spectrum file to fullrun_mos1_xmm0650420101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun May 12 17:21:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650420101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun May 12 18:19:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 18:19:10 2013] rmf not generated due to insufficient counts
[Sun May 12 22:41:13 2013] Updating aperture counts using extracted products
[Sun May 12 22:41:13 2013] Total counts from fullrun_mos1_xmm0650420101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 494.00
[Sun May 12 22:41:13 2013] Total counts from fullrun_mos1_xmm0650420101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 721.00
[Sun May 12 22:41:13 2013] Got source and background scale factors 1235562.000000, 2376984.000000
[Sun May 12 22:41:13 2013] User source parameters:
  Position = (166.2, 164.7) = 5 37 32.41 -69 24 49.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 119.2 +/- 23.2
  Background aperture counts = 374.8
  Rate = 0.002 +/- 0.0004

[Sun May 12 22:41:13 2013] Updating counts from extracted products
[Sun May 12 22:41:13 2013] Set source signif. to 119.22/19.36 = 6.16
[Sun May 12 22:41:20 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 22:41:20 2013] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0650420101_pi300-10000_pass1_cl_src14.arf
[Sun May 12 22:41:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 22:41:20 2013] Updating source flux to 5.9e-14
[Sun May 12 22:41:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 22:41:56 2013] xmm0650420101/analysis//spectral/fullrun_mos1_xmm0650420101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete