[Sun Jun  9 09:14:42 2013] Detection parameters:
  Position = (476.3, 367.2) = 4 48 30.12 -28 44 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.3 +/- 9.1
  Background counts = 2.2
  Rate = 0.007 +/- 0.001

[Sun Jun  9 09:14:42 2013] Off-axis axis estimate = 13.83'
[Sun Jun  9 09:14:55 2013] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:14:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 09:14:55 2013] Initial guess for spatial extent in simple fitting = 13.34"
[Sun Jun  9 09:14:55 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.963
[Sun Jun  9 09:14:55 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 13.34"
[Sun Jun  9 09:14:56 2013] fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun  9 09:14:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_src4.csv
[Sun Jun  9 09:14:56 2013] fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun  9 09:14:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_src4.csv
[Sun Jun  9 09:14:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:14:56 2013] fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun  9 09:14:56 2013] fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun  9 09:14:56 2013] Fit fullrun_mos2_xmm0650385001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Jun  9 09:15:04 2013] Spatial fit model total counts = 79.877800, observed total counts = 80.000000
[Sun Jun  9 09:15:04 2013] Offset between fit and detection position for source 3 = 0.256941 pixels
[Sun Jun  9 09:15:04 2013] 79.032200 total counts/ 45.115100 bgd. counts: snr = 5.049609
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.256941 pixels
  Position = (476.1, 367.3) = 4 48 30.20 -28 44 23.1
  Extent = 6.2 (4.7-7.8)", rotation angle = 0
  Source counts = 33.9 +/- 8.9
  Background counts = 45.1
  Rate = 0.004 +/- 0.001
[Sun Jun  9 09:15:04 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:15:04 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:15:04 2013] Source does appear to be extended
[Sun Jun  9 09:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:15:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 09:15:10 2013] Initial guess for spatial extent in simple fitting = 6.22"
[Sun Jun  9 09:15:10 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.074
[Sun Jun  9 09:15:10 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 6.22"
[Sun Jun  9 09:15:11 2013] fullrun_mos2_xmm0650385001_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun  9 09:15:11 2013] fullrun_mos2_xmm0650385001_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun  9 09:15:11 2013] Fit fullrun_mos2_xmm0650385001_pi300-10000_cl_pass1_src4 appears to have run properly
[Sun Jun  9 09:15:11 2013] fullrun_mos2_xmm0650385001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun  9 09:15:11 2013] fullrun_mos2_xmm0650385001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun  9 09:15:11 2013] Fit fullrun_mos2_xmm0650385001_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Jun  9 09:15:17 2013] Spatial fit model total counts = 69.991500, observed total counts = 70.000000
[Sun Jun  9 09:15:17 2013] Offset between fit and detection position for source 3 = 0.006683 pixels
[Sun Jun  9 09:15:17 2013] 68.981700 total counts/ 34.934700 bgd. counts: snr = 5.760369
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006683 pixels
  Position = (476.1, 367.3) = 4 48 30.20 -28 44 23.1
  Extent = 6.2 (4.7-7.8)", rotation angle = 0
  Source counts = 34.0 +/- 8.3
  Background counts = 34.9
  Rate = 0.004 +/- 0.001
[Sun Jun  9 09:15:17 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:15:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:15:17 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:15:17 2013] Source does appear to be extended
[Sun Jun  9 09:15:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 09:25:43 2013] XMMSAS src. selection expression = ellipse(41369.790880, 31905.471400, 370.766411, 370.766411, 0.000000, X, Y)
[Sun Jun  9 09:25:43 2013] Writing source region out to fullrun_mos2_xmm0650385001_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  9 09:25:43 2013] Extracting stamp from image fullrun_mos2_xmm0650385001_pi300-10000_cl_sm2.00.img.gz, (455, 346) - (497, 389)
[Sun Jun  9 09:25:43 2013] XMMSAS bgd. selection expression = annulus(41369.790880, 31905.471400, 617.944018, 1235.888036, X, Y)
[Sun Jun  9 09:25:43 2013] Writing fullrun_mos2_xmm0650385001_pi300-10000_pass1_cl_src3.gif
[Sun Jun  9 09:26:14 2013] Mean detx,y = (-7869.65, 12240.21) 
[Sun Jun  9 09:26:15 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 09:26:22 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 09:26:22 2013] Setting source spectrum file to fullrun_mos2_xmm0650385001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  9 09:26:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0650385001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  9 09:31:51 2013] Not generating rmf since there are only 34 counts
[Sun Jun  9 09:31:51 2013] rmf not generated due to insufficient counts
[Sun Jun  9 09:32:48 2013] Updating aperture counts using extracted products
[Sun Jun  9 09:32:48 2013] Total counts from fullrun_mos2_xmm0650385001_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 43.00
[Sun Jun  9 09:32:48 2013] Total counts from fullrun_mos2_xmm0650385001_pi300-10000_pass1_cl_src3_bgd.pi.gz = 57.00
[Sun Jun  9 09:32:48 2013] Got source and background scale factors 428800.000000, 3592000.000000
[Sun Jun  9 09:32:48 2013] User source parameters:
  Position = (476.1, 367.3) = 4 48 30.20 -28 44 23.1
  Extent = 6.2 (4.7-7.8)", rotation angle = 0
  Source aperture counts = 36.2 +/- 7.6
  Background aperture counts = 6.8
  Rate = 0.005 +/- 0.001

[Sun Jun  9 09:32:49 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 09:32:49 2013] Using photon index=1.80, rate=0.00447, arf fullrun_mos2_xmm0650385001_pi300-10000_pass1_cl_src3.arf
[Sun Jun  9 09:32:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 09:32:49 2013] Updating source flux to 1.6e-13
[Sun Jun  9 09:32:51 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 09:32:52 2013] xmm0650385001/analysis//spectral/fullrun_mos2_xmm0650385001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete